INSTRUCTIONS

.
(Recorded video and audio)
Completed Clip
Recording 3 Recording 2 Recording 1
Recording 3
Recording 2
Recording 1
(Recording stops)
Press and hold [REC]
(Recording pauses)
Press [REC]
(Recording pauses)
Press [REC]
(Recording resumes)
Press [REC]
(Recording resumes)
Press [REC]
(Recording starts)
Press [REC]
1
Set “Rec Mode” to “Clip Continuous”.
(A P135 [ Rec Mode ] )
0
Set [Main Menu
] B [System] B [Record Set]
B [Rec Mode] to “Clip Continuous”.
0
The display changes (
“STBY
” B “STBYC”).
2
Start recording. (Recording 1)
0
Press the [REC] button to start recording in
Clip Continuous mode.
0
The display changes (“STBYC” B
“RRECC”) and
the card slot status indicator
lights up in red.
3
Pause recording.
0
Press the [REC] button again to pause
recording. The display changes (“RRECC”
B “STBYC” (yellow text)).
0
The
card
slot status indicator remains lighted
in red.
Memo :
0
When
the
[CANCEL] button is pressed while the
camera recorder is paused (STBYC), the
display changes (“STBYC” (yellow text) B
“STBYC” (blinking yellow text) B “STBYC”
(white text)), and a “clip” is generated. The card
slot status indicator lights up in green.
4
Resume recording. (Recording 2)
0
Press the
[REC]
button again to resume
recording. The display changes (“STBYC”
(yellow text) B “RRECC”).
0
The card
slot status indicator remains lighted
in red.
5
Pause recording.
0
Press the [REC] button again to pause
recording. The display changes (“RRECC”
B “STBYC” (yellow text)).
0
The
card
slot status indicator remains lighted
in red.
6
Resume recording. (Recording 3)
0
Press the [REC]
button again to resume
recording. The display changes (“STBYC”
(yellow text) B “RRECC”).
0
The card
slot status indicator remains lighted
in red.
7
Press and hold the [REC] button.
0
Recording stops and the display changes
(“RRECC” B “STBYC”). A “clip” is
generated.
0
The card slot status indicator lights up in
green.
8
Press the [REC] button again.
0
The display changes (“STBYC” B
“RRECC”) and
the card slot status indicator
lights up in red.
0
A new “clip” is generated from here.
Memo :
0
The following operations cannot be performed
while recording
is paused (STBYC, yellow text).
0
Clip Review operation
(A P83 [Viewing Recorded Videos
Immediately (Clip Review)] )
0
Switching SD card slots
0
Switching operation mode
(A P18 [Operation Modes] )
Caution :
0
Do not remove the SD card during recording
(RRECC, red text) or recording pause
(STBYC, yellow text).
0
To remove
the SD card in the “Clip Continuous”
mode, press the [CANCEL] button, check that
“STBYC” (white text) is displayed and the card
slot status indicator lights up in green before you
remove the card.
0
When the SD card becomes full during
recording, recording stops and
“STOP
” is
displayed.
0
When the
[POWER ON/OFF] switch is turned off
during recording or recording pause, recording
stops and power is cut off after a clip is
generated.
90
Special Recording
Shooting