INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Shooting Mode
For switching the settings for image recording on
the camera.
0
Standard:
Normal shooting mode.
This setting is suitable for shooting low-noise
image quality.
Use this mode in well lit places.
0
Extended:
High sensitivity shooting mode.
This setting enables recording in various
brightness conditions.
Use this mode in places where the lighting is
difficult to control and the brightness is
insufficient.
[Setting Values: RStandard, Extended]
Reset Process
Restores all items in the [Camera Process
] menu
to their default settings.
Detail/Adjust Item
V/H Balance
For setting the H/V balance to enhance contour
(detail) in
the horizontal (H) or vertical (V) direction.
0
H+1 to H+4:
Increasing the value enhances contour in the
horizontal direction.
0
V+1 to V+4:
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+1 to H+4, RNormal, V+1
to V+4]
Memo :
0
When [System] under [Record Format] is set to
“SD
”, this item is fixed at “Normal”.
0
When [System
]
under [Record Format] is set to
“HD+SD”, this item can be set during HD
recording, but will be fixed at “Normal” during SD
recording.
H Frequency
For specifying the correction frequency of the
horizontal contour.
Set this according to the object.
0
High:
Emphasizes the
high frequency range. Use this
when shooting objects with fine patterns.
0
Middle:
Emphasizes the intermediate frequency range.
0
Low:
Emphasizes the low frequency range. Use this
when shooting objects with large patterns.
[Setting Values: High, RMiddle, Low]
Memo :
0
When [System] under [Record Format]
is set to
“SD”, this item is fixed at “Low”.
0
When [System] under [Record Format
] is set to
“HD+SD
”, this item can be set during HD
recording, but will be fixed at “Low” during SD
recording.
Skin Detail
For turning On/Off the Skin Detail function, which
is used
to adjust the contour correction effect of the
colors captured.
Select “On” to soften the detail at areas where skin
tone is detected.
[Setting Values: On, ROff]
9
Level
For setting the level of contour correction (degree
of softening) using the Skin Detail function.
Decreasing
the
value increases the level of contour
correction (degree of softening).
[Setting Values: -1, R -2, -3]
9
Range
For adjusting the range of skin tone to trigger the
Skin Detail function.
Increasing the value increases the range.
[Setting Values: -5 to +5 (R0)]
Camera Process Menu
117
Menu Display and Detailed Settings