INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Symptom Action
No sound during playback.
0
Is
the
currently played clip recorded in the Variable Frame Rec mode?
(A P93 [Variable Frame Rec] )
Images on the LCD monitor
and viewfinder screen appear
dark or blurred.
0
Readjust the brightness of the LCD monitor and viewfinder.
0
Is the [ND FILTER
] switch set to “1/64”?
0
Is the iris closed?
0
Is the shutter speed setting too high?
0
Is the amount of peaking too little? Use the [
PEAKING +/-] button to
adjust the contour for the LCD monitor and the viewfinder screen.
(A P39 [Adjusting the LCD Monitor] )
(
A P40 [Adjusting the Viewfinder] )
The [CH-1/CH-2] recording
level adjustment knob does
not work.
0
Is the [CH-1/CH-2 AUTO/MANUAL] switch set to “AUTO”?
0
Is the [FULL AUTO] switch set to “ON”?
Is the [FULL AUTO] switch set to “ON”, and [Camera Function]
B
[FULL AUTO] B [Audio] set to “Auto”?
(A P
114 [ Audio ] )
[CH-3/CH-4] audio is not
recorded.
0
Is the number of recording channels set to
“4ch”?
(
A P133 [ W
Audio ] )
(A P134 [ Y Audio ] )
0
Is [System] B [Record Set] B [Record Format] B [WFormat]/
[YFormat] set to “AVCHD”? Select a setting other than “AVCHD”.
(A P133
[ W Format ] )
(
A P134 [ Y Format ] )
SD card cannot be initialized
(formatted).
0
Is the write-protect switch of the SD card turned on?
Make sure that the write-protect switch is turned off.
(A P43 [Write-Protect Switch on the SD Card] )
Battery alarm appears even
after loading a charged
battery.
0
Is the battery too old?
Menu cannot be operated.
0
Is the Menu Lock mode turned on?
(
A P106
[About the Menu Lock Feature] )
The time code and user’s bit
are not displayed.
0
Even in Camera mode or Media mode, the time code and user’s bit
may not be displayed depending to the type of display.
0
Is [
LCD/VF]
B [Display Settings] B [TC/UB] set to “Off”? To display
the time code or user’s bit, set it to “TC” or “UB”.
(A P123
[ TC/UB ] )
The date and time are not
displayed.
0
The date and time are only displayed on the Display 1 and Display 2
screens in the Camera mode (during shooting).
(
A P
145 [Display Screen in Camera Mode] )
0
Is [System]
B [Record Set] B [Time Stamp] set to “On”? To display
the date and time, set it to “Off”.
(A P136
[ Time Stamp ] )
Troubleshooting
207
Others