INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Adjusting the LCD Monitor
.
2
1
Tilt 90 degrees downward
Tilt 180 degrees upward
3
1
Slide the LCD cover lock release knob to
open the LCD monitor.
2
Incline the LCD monitor to a position that
enables easy viewing.
Rotate the LCD monitor to adjust the angle.
0
While the LCD monitor is open, you can
rotate it 180 degrees upward or 90 degrees
downward.
0
Rotating the LCD monitor 180 degrees
upward enables you to see the screen from
the
lens
side. To display the image when it is
viewed from the opposite direction (mirror
image), perform setting as follows.
Set [Main Menu] B [LCD/VF] B [LCD Mirror]
to “Mirror” B Set button (R)
(A P
120 [ LCD Mirror ] )
3
Adjust the brightness, contour, and
contrast of the LCD monitor.
You
can change the angle and brightness of the
LCD monitor
according to your usage condition.
Changing the brightness of the screen will not
affect the recorded images.
Adjusting the Brightness
Use the [LCD BRIGHT
+/-] button to adjust the
brightness of the LCD monitor.
0
The [+] button brightens the monitor and the
[-] button darkens it.
0
Press
the
[+] and [-] buttons simultaneously
to return to standard settings.
0
During adjustment, the brightness level is
displayed on the LCD monitor.
.
P13000K
1/100
F1.6
0
dB
AE+6
ND 1 /64
+5
Adjusting the Contour
Use the [LCD PEAKING
+/-] button to adjust the
contour of the LCD monitor.
0
The [+]
button increases contour correction
and the [-] button decreases contour
correction.
0
Press
the
[+] and [-] buttons simultaneously
to return to standard settings.
0
During adjustment, the contour level is
displayed on the LCD monitor.
.
P13000K
1/100
F1.6
0
dB
AE+6
ND 1 / 64
+5
Memo :
0
During Focus Assist operation, the contour
correction effect on the LCD monitor will be
temporarily disabled.
Adjusting the Contrast
Use the [LCD Contrast] menu to adjust the
contrast of the LCD monitor.
0
Adjust using [Main Menu]
B
[LCD/VF]
B
[LCD
Contrast].
0
Increasing the value increases the contrast.
[Setting Values: +10 to -10] (Default value: 0)
Adjusting the LCD Backlight
0
Adjust using [Main Menu] B [LCD/VF] B
[LCD Backlight].
(A P
120 [ LCD Backlight ] )
0
When using the camera recorder at a bright
location such
as one subject to outside light,
setting to “Bright” helps to ease viewing.
0
You can also adjust the backlight using the
user button assigned with the “LCD
Backlight” function.
(A P42
[Assignment of Functions to User
Buttons] )
Adjusting the LCD Monitor and Viewfinder
39
Preparations