INST SHEET

© 2015 JVC KENWOOD Corporation
B5A-1100-00
2
● When shooting is performed using multiple cameras, the colors of
the different cameras can be adjusted, and a color of the user’s
preference can be set on this camera recorder.
● The saturation, hue and brightness of the primary and
complementary colors (6 colors in total) can be set individually.
● Adjust the color on the vector scope and waveform monitor using
the DSC color chart.
*
The adjusted values of “Standard”, “Cinema Vivid”, and “Cinema
Subdued” in [Color Matrix] can be stored individually.
1. Select [Camera Process]N[Color Matrix] / [Adjust].
2. Hue adjustment [Setting range: -5 to +5] (roughly ± 5°)
● Select the color using the cross-shaped button (
JK) and confirm
using the cross-shaped button (
I). (The cursor moves to “Hue”.)
● Pressing the cross-shaped button (
J) rotates the hue in the
clockwise direction on the vector scope.
● Pressing the cross-shaped button (
K) rotates the hue in the
anti-clockwise direction on the vector scope.
3. Saturation adjustment [Setting range: -10 to +10] (roughly ± 10%)
● Press the cross-shaped button (
I) to move the cursor to
“Saturation”.
●
Each of the colors changes in the direction indicated by the arrow
on the vector scope.
● Pressing the cross-shaped button (J) moves the color outward
from the center of the circle on the vector scope.
● Pressing the cross-shaped button (
K) moves the color toward to
the center of the circle on the vector scope.
4. Brightness adjustment [Setting range: -10 to +10] (roughly ± 10%)
● Pressing the cross-shaped button (
J) lightens; and pressing the
cross-shaped button (
K) darkens.
● Press the cross-shaped button (
I) to return the cursor to
“Brightness”.
[Black Paint] added to menu item
[Black Paint] is added to [Camera Process].
The black color cast of Rch and Bch can be adjusted individually.
● Increase the number:
Strengthens the red/blue.
● Decrease the number:
Weakens the red/blue.
[Setting Values: R/B: -50 to +50 (
R 0)]
Icon display added when zebra function is “On”
During zebra pattern display, (zebra icon) is displayed on the
display screen in Camera mode.
Setting items changed in menu item [Rec Trigger]
Setting items in [A/V Set]N[Video Set]N[HDMI/SDI Out]N[Rec
Trigger] are changed.
● HDMI:
Superimposes the trigger signals in tandem with the [HDMI]
terminal as well as the [REC] button on the camera body and
outputs the recording/stop control signals to the compatible device.
● SDI:
Superimposes the trigger signals in tandem with the [SDI OUT]
terminal as well as the [REC] button on the camera body and
outputs the recording/stop control signals to the compatible device.
●
HDMI + SDI:
Superimposes the trigger signals in tandem with the [HDMI / SDI OUT]
terminal as well as the [REC] button on the camera body and outputs
the recording/stop control signals to the compatible device.
[Setting Values: ROff, HDMI, SDI, HDMI+SDI]
Memo :
● When [A/V Set] N [Video Set] N [HDMI/SDI Out] is set to “Off”, [Rec Trigger]
is fixed at “Off” and selection is disabled.
● When [System]N[Record Set]N[Rec Mode] is set to “Interval Rec” or
“Frame Rec”, [Rec Trigger] is fixed at “Off” and selection is disabled.
● Set to “Off” when connecting to a device that does not support record trigger.
Bit Rate added to live streaming
Setting values are added to [System]N[Network] / [Settings]N[Live
Streaming Set]N[Frame & Bit Rate]
[Adaptive Bit Rate] and [PCR Jitter] added to menu item
The following items are added to [System]N[Network] /
[Settings]N[Live Streaming Set]N[Streaming Server]N[Server1] /
[Server2] / [Server3] / [Server4].
● Adaptive Bit Rate
If “On” is selected, the bit rate setting value of live streaming is set to
maximum limit, and the bit rate is changed automatically according
to changes in the network bandwidth. [Setting Values: On,
ROff]
Memo :
● Adaptive bit rate setting is possible only when [Type] is set to “ZIXI” and
[Latency] is set to either “Medium” or “Low”.
* The bit rate is displayed on the status screen only when “On” is set.
● PCR Jitter
Setting to “Low” reduces to PCR jitter of live streaming.
[Setting Values:
RNormal, Low]
Memo :
● This item is selectable only when [Type] is set to “MPEG2-TS/UDP”.
[APN] added to menu item
[APN] is added to [System]N[Network] / [Settings]N[Connection
Setup].
* APN: Access Point Name
* This item is gray out and cannot be selected if APN cannot be set for
the adapter attached.
Caution :
● The APN setting is written into the cellular adapter, not this camera
recorder. Setting a wrong APN may result in communication failure or
expensive bills from the telecommunications company. Set the APN
correctly.
FTP resume feature added
When FTP transfer starts and there is a file of the same name on the
server with a file size smaller than the file to be transferred, the file on
the server will be regarded as an interrupted file during a FTP transfer.
A confirmation screen to resume transfer (append writing) appears.
If “Resume” is selected, FTP transfer is carried out such that it appends
from the position where it was interrupted. When FTP transfer ends
normally, “Successfully Completed.” appears on the screen.
Memo :
● FTP server equipped with Resume function is required.
● If [System]N[Network] / [Settings]N[Clip Server]N[Clip-FTP1/2/3/4]N
[Protocol] is set to “SFTP”, the “Resume” function is disabled.
● If “HTTP” is selected in the [Select FTP Proxy] screen of the network
connection setting, the Resume function is disabled.
R
Cy
B
G
Y
I
Mg
R
Cy
B
G
Y
I
Mg
R
Cy
B
G
Y
I
Mg
R
Cy
B
G
Y
I
Mg
R
Cy
B
G
Y
I
Mg
R
Cy
B
G
Y
I
Mg
Magenta
Green
Blue
Yellow
Cyan
Red
R
Cy
B
G
Y
I
Mg
R
C
y
B
G
Y
I
Mg
R
Cy
B
G
Y
I
Mg
R
Cy
B
G
Y
I
Mg
R
Cy
B
G
Y
I
Mg
R
Cy
B
G
YI
I
Mg
Magenta
Green
Blue
Yellow
Cyan
Red
No. of
Frames for
Frame & Bit
Rate
Resolution New values are in bold
60i, 60p,
30p
1920x1080 60i (12 Mbps),
R 60i (8 Mbps),
60i (5 Mbps), 60i (3 Mbps)
1280x720 30p (8 Mbps),
R 30p (5 Mbps),
30p (3 Mbps), 30p (1.5 Mbps)
720x480
60i (8 Mbps), 60i (5 Mbps), R 60i (3 Mbps),
60i (1.5 Mbps), 60i (0.8 Mbps), 60i (0.3 Mbps)
640x360 30p (3 Mbps), R 30p (1.5 Mbps),
30p (0.8 Mbps), 30p (0.3 Mbps)
50i, 50p,
25p
1920x1080 50i (12 Mbps),
R 50i (8 Mbps),
50i (5 Mbps), 50i (3 Mbps)
1280x720 25p (8 Mbps),
R 25p (5 Mbps),
25p (3 Mbps), 25p (1.5 Mbps)
720x576
50i (8 Mbps), 50i (5 Mbps), R 50i (3 Mbps),
50i (1.5 Mbps), 50i (0.8 Mbps), 50i (0.3 Mbps)
640x360 25p (3 Mbps), R 25p (1.5 Mbps),
25p (0.8 Mbps), 25p (0.3 Mbps)
Setting value “ZIXI” added to menu item [Protocol]
“ZIXI” is added to [System]N[Network] / [Settings]N[Clip Server]N
[Clip-FTP1/2/3/4]N[Protocol].
If “ZIXI” is selected, [Username] in [System]N[Network] /
[Settings]N[Clip Server]N[Clip-FTP1/2/3/4] changes to [Stream ID].
[Setting Values:
RFTP, SFTP, FTPS, FTPES, ZIXI]
Memo :
● To use the “ZIXI” setting, a dedicated server is needed separately.
● If “ZIXI” is set, the “Resume” function is enabled.
Items added to thumbnail screen
The following items are added to the metadata display on the detailed
screen of the thumbnail screen.
● Clip Size
● Gamma
Clip Continuous added to recording mode for AVCHD
“Clip Continuous” is added to the setting value for “AVCHD” format in
[System]N[Record Set]N[Rec Mode].
Clip Continuous Rec can also be operated in “AVCHD” mode.
Setting value “Side Cut” added to menu item [SD Aspect]
“Side Cut” is added to the setting value for [A/V Set] N [Video Set] N [SD Aspect].
● Letter:
Displays as a wide image with the top and bottom blackened.
● Squeeze:
Displays image that is squeezed horizontally.
● Side Cut:
Displays wide screen with the left and right sides cut off.
[Setting Values:
RSqueeze, Letter, Side Cut]
Memo :
● When “SD” is selected in [System]N[Record Set]N[Record Format]N
[System], “Squeeze” and “Letter” can be selected.
● When “C4K” or “C2K” is selected in [System]N[Record Set]N[Record
Format]N[System], this item cannot be set.
2.5x display mode added to Expanded Focus function in 4K
and C4K mode
An approximately 2.5x display mode is added to the Expanded Focus
function when “4K” or “C4K” is selected in [System]N[Record Set]N
[Record Format]N[System]. You can use the Set button (
R) to switch
between the conventional dot by dot equivalent (approximately 5x)
display and the 2.5x display.
Memo :
● Upon power on, the display of the initial Expanded Focus is dot by dot
equivalent (approximately 5x).
Setting value “VSM-z” added to menu item [Grip Zoom]
“VSM-z” is added to the setting value for [Camera Function] N [Grip Zoom].
For assigning the zoom, focus and VSM zoom functions to the zoom
lever at the grip.
When “VSM-z” is set, zooming within the VSM range is made possible by
varying the scan range using the zoom lever at the grip. The zoomed location is
displayed on the zoom display location on the upper right corner of the screen.
The maximum zoom range is approximately 1.2x for “4K” and
approximately 2.3x for “HD”. [Setting Values:
RZoom, Focus, VSM-z]
[AF Speed] added to menu item
[AF Speed] is added to [Camera Function].
For setting the AF operation speed. [Setting Values: Fast, R Middle, Slow]
Memo :
● The variation in speed may be small depending on the lens.
Setting value “Area” added to menu item [AF Assist]
“Area” is added to [Camera Function]N[AF Assist].
● Off:
“Off” the AF Assist function.
● Far/Near:
This option allows you to shift the auto focus point to near and far
directions by operating the focus manually during AF. Focus is
automatically adjusted to a focus point near the position where the
focus cannot be operated further.
● Area:
Selecting this option displays the icon in the area.
Operating the focus manually while in the AF mode displays the focus
area on the left, center, and right side for about 2 seconds. Pressing
the zoom lever at the grip each time within 2 seconds allows you to
move the orange frame to select the focus area.
After selecting the area, focus is automatically adjusted to a focus
point near the selected area.
[Setting Values:
ROff, Far/Near, Area]
Setting for operating Iris/Shutter/AE Level using iris dial added
Setting value “Iris/Shutter/AE Level” are added to [Camera Function] N
[Iris Dial].
If “Iris/Shutter/AE Level” is selected, the iris dial that is normally used to
operate the iris will operate the shutter when the [SHUTTER] button is
pressed and will operate the AE level when the [AE LEVEL] button is
pressed. After which, the iris dial resumes its iris operation.
[Setting Values:
RIris, Shutter, AE Level, Iris/Shutter/AE Level]
[HDMI TC] added to menu item
[HDMI TC] is added to [A/V Set]N[Video Set].
For setting whether to superimpose the time code to the HDMI output
terminal.
[Setting Values:
ROff, On]
Memo :
● When [A/V Set]N[Video Set]N[HDMI/SDI Out] is set to “SDI” or “Off”,
[HDMI TC] is fixed at “Off” and selection is disabled.
● Set to “Off” when connecting to a device that does not support HDMI TC.
Setting values added to marker aspect ratio
Setting values are added to [LCD / VF]N[Marker Settings]N[Marker]N
[Aspect Ratio] in C4K or C2K mode.
For selecting the final image aspect ratio to be used from the overall
angle of view.
When [System] is set to “4K”, “HD”, “SD” or “HD+Web”
[Setting Values: 16:9(+4:3), 2.35:1 Top, 2.35:1 Center, 1.85:1 Top,
1.85:1 Center,
R16:9, 1.75:1, 1.66:1, 14:9, 13:9, 4:3]
When [System] is set to “C4K” or “C2K”
[Setting Values: 1:85:1, 1.9:1, 2.35:1, 2.40:1]
Setting value changed in [Resolution] under [HDMI/SDI Out]
The video output is changed to native frame rate and setting values are added.
For selecting the resolution of video output from the [HDMI] terminal or
[SDI OUT] terminal according to the monitor to be connected.
[Setting Values: 576i, 576p, 480i, 480p, 480i Y, 480i Z, 480p Y,
480p Z, 720p, 1080i, 1080p, 1080/30p, 1080/25p, 1080/24p,
2K Y /24p, 2K Z /24p, C2K/24p, 4K Y /24p, 2160/24p, 2160/25p,
2160/30p, C4K/24p]
Y is the side cut icon
Z is the letterbox icon
Memo :
● When [System]N[Record Set]N[Record Format]N[Frame Rate] is set
to “24.00p”, the 576i, 576p, 480i and 480p settings in [Resolution]
cannot be selected.
Setting values added to menu item [VSM]
Setting values are added to [System]N[Record Set]N [VSM] when
System is set to “C4K” or “C2K”.
The selectable options vary according to the [System] N [Record Set] N
[Record Format]
N [System] setting.
● When [System] is set to “C4K”:
[Setting Values: R100%(Super35), 97%, 95%, 92%(C4K), 89%,
86%, 82%(MFT)]
● When [System] is set to “C2K”:
[Setting Values:
R100%(Super35), 97%, 95%, 92%(C4K), 89%,
86%, 82%(MFT), 76%, 72%, 67%, 63%, 59%, 54%, 52%(Super16),
50%, 46%(C2K)]
● When [System] is set to “4K”:
[Setting Values:
R100%(Super35), 97%, 95%, 92%, 89%, 86%(4K),
83%, 80%(MFT)]
● When [System] is set to “HD”, “SD” or “HD+Web”:
[Setting Values:
R100%(Super35), 97%, 95%, 92%, 89%, 86%(4K),
83%, 80%(MFT), 76%, 72%, 67%, 63%, 59%, 54%, 52%(Super16),
47%, 43%(HD)]
Other notes
● Use a support system when attaching a lens weighing 0.8 kg and
above.
●
The “MPEG LA MPEG-2 Patent” described in the “INSTRUCTIONS”
of this book is not applicable to this product.
Manufacturer
3-12, Moriya-cyo, Kanagawa-ku, Yokohama-shi,
Kanagawa 221-0022, Japan
Importer (EU only)
12 Priestley Way, London NW2 7BA, United Kingdom
GY-LS300Sheet_EN.fm 2 ページ ２０１５年９月１１日 金曜日 午後６時１７分