INSTRUCTIONS(BASIC)

Adjusting the Grip Belt
Open
the pad and adjust the position of the grip belt
accordingly.
.
Caution :
0
If
the grip is loose, the camera recorder may fall
off resulting in injuries or malfunction.
Attaching the Supplied
Microphone O
You can attach the supplied microphone to the
microphone holder.
The supplied microphone uses a phantom power
supply.
.
4
5
1, 3
2
1
Turn the knob on the microphone holder
counterclockwise to loosen and open the
microphone holder.
2
Place the microphone in the microphone
holder.
3
Turn the knob on the microphone holder
clockwise to secure the microphone.
4
Connect the microphone cable to the
[INPUT1]
or [INPUT2] terminal.
5
Pin the microphone cable to the clamp.
6
Perform the settings for the phantom mic
correctly.
Charging the Battery
Charging the Battery
Charge the battery immediately after purchase or
when the battery power is running low.
*
The battery is not charged when purchased.
.
3
2
1
4
1
Hold down the lock button (blue) at the
center of the [POWER ON/OFF] switch to set
to “OFF”.
2
Attach the supplied battery.
Slide it in until you hear a click.
3
Connect the supplied AC adapter to the
[DC]
terminal.
Open the cover of the [DC]
terminal and connect
as shown in the diagram.
4
Connect the AC adapter to a power outlet.
0
The [POWER/CHARGE] lamp blinks during
charging and will go out after charging is
complete.
0
Remove the AC adapter after charging is
complete.
14
Adjusting the Grip Belt
Preparations