CAMCORDER Uitgebreide gebruikshandleiding GZ-E505 / GZ-E509 / GZ-EX510 / GZ-EX515 LYT2565-011A
Inhoudsopgave Beginnersgids ................................................................ 4 Nuttige technieken voor het filmen Vakantie/Kerstmis .................................................................... 5 Huwelijk ................................................................................... 6 Reizen ..................................................................................... 8 Pretpark .................................................................................
Beeldbewaking via een toegangspunt thuis (BINNENMONITORING) .................................................. 119 Beeldbewaking via het internet (BUITENMONITORING) .... 124 Stilstaande beelden via e-mail versturen na gezichtsdetectie of beweging (DETECTEREN/MAIL) ..................................... 127 Video´s opnemen en via e-mail versturen (VIDEOMAIL) ..... 129 Beeldbewaking op TV (TV-MONITORING) ......................... 130 GEMAKKELIJKE OPSLAG ..................................................
Beginnersgids Neerhurken en filmen op oogniveau . . Standaard manier voor het vasthouden van een camcorder ~ Stabiele beelden opnemen ~ Dit is een standaard manier om te filmen terwijl u rechtop staat. Zorg dat u deze basistechniek beheerst, om stabiele beelden te verkrijgen. De lage positie is een gebruikelijke houding voor het filmen van kinderen. Als u opneemt op het oogniveau van het kind, kunt u duidelijk alle schattige gelaatsuitdrukkingen vastleggen.
Nuttige technieken voor het filmen Vakantie/Kerstmis Neem het vrolijke kerstfeest met uw familie op! . . Inleiding op de verschillende technieken voor het filmen! o ”Vakantie/Kerstmis” (A pag. 5) Neem het vrolijke kerstfeest met uw familie op! Foto genomen door 101st CAB, Wings of Destiny De boom versieren en het diner voorbereiden De versiering van de boom en de voorbereiding van het diner maken deel uit van de kerstvreugde. Zorg ervoor dat u deze gelukkige familiemomenten opneemt! .
Nuttige technieken voor het filmen Het kerstfeest opnemen Huwelijk Foto genomen door InnerSpirit Creative Commons Attribution-No Derivative Works 3.0 Na alle voorbereidingen is het eindelijk tijd voor het kerstfeest zelf.
Nuttige technieken voor het filmen De gelaatsuitdrukkingen en opmerkingen van de gasten opnemen o De opname maken van oogniveau tot borstniveau Geavanceerd gebruik met twee camcorders Als er een videomontage moet worden gemaakt, neem dan op met twee camcorders, zodat er een video met variërende scènes kan worden geproduceerd. U kunt een vriend die een camcorder heeft vragen of u deze mag lenen. Installeer de geleende camcorder op een statief, om close-upopnamen te maken van de bruid en de bruidegom.
Nuttige technieken voor het filmen o Accuoplader Reizen . . Leg alle mooie momenten vast van uw binnenlandse of buitenlandse trips! Het noodzakelijke materiaal meenemen De noodzakelijke dingen die u moet meenemen op een trip zijn afhankelijk van het doel van uw reis en van de bestemming. Voor reizen naar het buitenland moet u nadenken over wat u moet meenemen, en hierbij rekening houden met de lokale omstandigheden. Hier volgen enkele suggesties die u kunt overwegen.
Nuttige technieken voor het filmen De functie voor panoramisch filmen gebruiken voor bezienswaardigheden . . Toeristische plekken met prachtige uitzichten of historische locaties zijn ongetwijfeld plaatsen waarvan u opnamen wilt maken. Probeer ”pannen” of de veegtechniek uit om een prachtig landschap te filmen dat niet in een enkel beeldkader past. Raadpleeg de ”Tips voor het filmen” in de ”Beginnersgids” op deze website voor informatie over het gebruik van deze functie voor panoramisch filmen.
Nuttige technieken voor het filmen Pretpark Antwoorden uitlokken door te roepen . . Maak meer opnamen van de lachende gezichten van iedereen in de familie! Video’s of stilstaande beelden opnemen afhankelijk van de attractie U kunt ervoor kiezen de hele tijd video’s op te nemen. Misschien wilt u echter ook enkele stilstaande beelden vastleggen. In het volgende hoofdstuk worden de scenario’s beschreven die geschikt zijn voor het opnemen van video’s of stilstaande beelden.
Nuttige technieken voor het filmen Geavanceerd gebruik met tegenlichtcompensatie Als het gezicht van het onderwerp zich in tegenlicht bevindt of als de uitdrukking niet duidelijk zichtbaar is, verhoogt de Intelligent Auto functie van dit apparaat automatisch de helderheid voor het opnemen. Als Intelligent Auto niet werkt zoals verwacht of als de helderheidscorrectie ontoereikend is, kunt u de helderheid verhogen door gebruik te maken van tegenlichtcompensatie in de Handmatige stand.
Aan de slag Het toebehoren controleren Als een van de onderdelen ontbreekt of defect is, raadpleeg dan uw JVC-dealer of het dichtstbijzijnde JVC-dienstencentrum. Afbeelding Beschrijving . Lichtnetadapter AC-V10E 0 Voor verbinding met dit apparaat om het accupack op te laden. Kan ook worden gebruikt voor het binnenshuis opnemen of afspelen van video’s. . Accupack BN-VG114E x 1 (GZ-EX515/GZ-EX510/GZ-E505) BN-VG114E x 2 (GZ-E509) 0 Voor verbinding met dit apparaat om deze aan te sluiten op het lichtnet.
Aan de slag Het kernfilter bevestigen . Bevestig een kernfilter op het stroomsnoer van de lichtnetadapter die is aangesloten op deze eenheid. Het kernfilter vermindert interferentie als dit apparaat is aangesloten op andere apparaten.
Aan de slag Het accupack opladen Het accupack moet worden opgeladen onmiddellijk na de aankoop en wanneer de accu bijna leeg is. Het accupack is niet opgeladen bij de aankoop. 1 Het accupack bevestigen. Heroplaadbare accu’s: Als u de accu gebruikt in een omgeving met lage temperaturen (10 °C of lager), bestaat de mogelijkheid dat de gebruikstijd korter wordt of dat de accu niet goed werkt.
Aan de slag Afstelling van de handgreep (GZ-E509/GZE505) . Afstelling van de handgreep (GZ-EX515/GZEX510) A Open de hendel op riemvergrendeling B Pas de lengte van de riem aan C Sluit de hendel . OPMERKING : 0 De Wi-Fi-antenne bevindt zich in de riembeschermer. Trek niet aan de Wi-Fi-antenne niet uit wanneer u de riem aanpast. LET OP : 0 Zorg ervoor dat u de draagriem goed vasttrekt. Als de riem loszit, kan dit apparaat vallen en letsels veroorzaken of beschadigd raken.
Aan de slag Een SD-kaart plaatsen Voer een commercieel beschikbare SD-kaart in alvorens op te nemen. ”Typen SD-kaarten die kunnen worden gebruikt” (A pag. 16) ”Geschatte video-opnametijd” (A pag. 66) Sluit de LCD-monitor. 2 Open het deksel van de SD-kaart. Druk de SD-kaart eenmaal naar binnen en trek ze vervolgens recht eruit. . . 1 De kaart verwijderen Typen SD-kaarten die kunnen worden gebruikt Op dit apparaat kunnen de volgende SD-kaarten worden gebruikt.
Aan de slag 0 0 0 0 0 0 0 0 Als u andere SD-kaarten (inclusief SDHC/SDXC-kaarten) gebruikt dan de hierboven vermelde, kan dit leiden tot mislukte opnamen of gegevensverlies. Het is niet gegarandeerd dat dit apparaat werkt met alle SD-kaarten. Sommige SD-kaarten werken mogelijk niet omwille van wijzigingen in de specificaties enz. Voor de opname van video’s met ”VIDEOKWALITEIT” ingesteld op ”UXP” , wordt het gebruik van een SDHC/SDXC-kaart die compatibel is met Klasse 6 of hoger aanbevolen.
Aan de slag Het aanraakpaneel aanpassen Stelt de reactiepositie van de knoppen van het aanraakscherm af. *Het scherm hieronder is van een model met Wi-Fi-functies. Tik op ”MENU”. . 1 0 De instelling wordt beëindigd en het menuscherm wordt opnieuw weergegeven. LET OP : . 0 2 Tik op ”INSTALLATIE”. OPMERKING : . 0 0 Tik op ”INST. AANRAAKSCHERM”. 4 Tik op ”+”. (3 keer in totaal) . 3 Het scherm voor de afstelling van het aanraakscherm verschijnt. .
Aan de slag Namen van knoppen en functies op de LCD-monitor Weergavescherm (Video) De volgende schermen worden weergegeven tijdens de video- en stilstaand-beeldstanden, en werken als de aanraakschermen. . Opnamescherm (video/stilstaand beeld) . 0 1 0 2 Schakelt tussen de video- en stilstaand beeld-stand. 4 3 Schakelt over naar de weergavemodus.
Aan de slag Weergave indexscherm (miniatuurweergave) ”SPECIALE OPNAME Menu (video)” (A pag. 215) 11 OPNAME INSTELIING Menu ”OPNAME INSTELIING Menu (video)” (A pag. 211) . Menuscherm (afspeelstand) Toets voor stand A/B (Video/Stilstaand Beeld) 0 2 Schakelt tussen de video- en stilstaand beeld-stand. Knop Datum ”Bedieningsknoppen voor Videobeelden afspelen” (A pag. 69) ”Bedieningsknoppen voor de weergave van stilstaande beelden” (A pag. 80) 3 Knop Opnamemodus 0 4 Schakelt over naar de opnamemodus.
Aan de slag Instelling van de klok Het scherm ”STEL DATUM/TIJD IN!” verschijnt wanneer u dit apparaat voor de eerste keer inschakelt nadat u het hebt aangekocht, als het gedurende een lange periode niet werd gebruikt of als de klok nog niet is ingesteld. Stel de klok in voor u begint met opnemen. *Het scherm hieronder is van een model met Wi-Fi-functies. Stel de klok in met ”KLOK INSTELLEN” uit het menu. *Het scherm hieronder is van een model met Wi-Fi-functies. 1 Tik op ”MENU”.
Aan de slag 5 Stel de datum en de tijd in. De taal op het scherm wijzigen De schermtaal kan gewijzigd worden. *Het scherm hieronder is van een model met Wi-Fi-functies. Tik op ”MENU”. 2 Tik op ”INSTALLATIE”. 3 Tik op ”LANGUAGE”. . 1 0 . 0 Wanneer het onderdeel van de dag, de maand, het jaar, het uur of de minuut wordt aangetikt, worden ”3” en ”2” weergegeven. Tik op 3 of 2 om het jaar, de maand, de dag, het uur en de minuut aan te passen.
Aan de slag Dit apparaat vasthouden Dit apparaat kan worden bevestigd op een statief (of éénbenig statief). Dit is handig om te voorkomen dat de camera schudt en om opnamen te maken vanuit dezelfde positie. . Houd wanneer u dit apparaat vasthoudt uw ellebogen dichtbij uw zijden om te voorkomen dat de camera schudt.
Aan de slag Dit apparaat gebruiken in het buitenland De vorm van het stopcontact varieert voor verschillende landen. Om het accupack op te laden hebt u een omvormstekker nodig die past in de vorm van het stopcontact. ”Het accupack opladen in het buitenland” (A pag. 24) Wijzig de datum-en tijdweergave in de lokale tijd door uw reisbestemming te selecteren in ”GEBIEDINST” van ”KLOK INSTELLEN”. ”De klok wanneer u op reis bent instellen op de lokale tijd” (A pag. 24) Als ”AAN” is geselecteerd in ”INST.
Aan de slag Zomertijd instellen Als ”AAN” is geselecteerd in ”INST. ZOMERTIJD” van ”KLOK INSTELLEN” , wordt de tijd 1 uur vooruit gezet. *Het scherm hieronder is van een model met Wi-Fi-functies. Tik op ”MENU”. . 1 2 Tik op ”INSTALLATIE”. Optionele accessoires U kunt langer opnemen als u het optionele accupack gebruikt. Productnaam Beschrijving Accupack BN-VG114E BN-VG121E BN-VG138E 0 Biedt een langere opnametijd. Het kan ook worden gebruikt als reserve accupack.
Opnemen Video’s opnemen in automatische stand Aanwijzingen voor video-opname Met behulp van de intelligent auto modus kunt u opnemen zonder zich al te veel zorgen te maken over de instellingen. Instellingen zoals belichting en focus worden automatisch aangepast aan de opnamecondities. 0 In het geval dat u een specifieke opname maakt van bijvoorbeeld een persoon enz., dan wordt het overeenkomstige pictogram weergegeven op het scherm.
Opnemen o Scènes van Intelligent Auto Beschrijving g Legt de huid prachtig vast. V Zorgt ervoor dat men op natuurlijke wijze wordt vastgelegd. f Neem een groep mensen op met de meest geschikte instellingen. W Neem het glimlachende gezicht duidelijk op. S Neemt op wanneer gericht op een voorwerp nabij. a Focust op lange afstand en legt een scherp beeld vast met levendige kleuren. Z Neemt op in donkere ruimten met minimale ruis in het algehele beeld.
Opnemen Gebruik van de Stille modus 0 In de Stille modus wordt de LCD-monitor zwart en worden er geen geluiden weergegeven. Gebruik deze stand om in stilte opnamen te maken in donkere ruimtes, zoals tijdens een voorstelling. 0 T verschijnt als ”STILLE MODUS” is ingesteld op ”AAN”. 0 Het licht wordt uitgeschakeld wanneer ”STILLE MODUS” ingesteld is op ”AAN”. o Bedieningsprocedure A Tik op ”MENU”. 0 Het bovenste menu verschijnt. B Tik op ”STIL”. OPMERKING : 0 0 . 0 0 C Tik op ”AAN”. 0 0 0 .
Opnemen Stilstaande beelden opnemen in Automatische stand 4 Neem een stilstaand beeld op. Met behulp van de intelligent auto modus kunt u opnemen zonder zich al te veel zorgen te maken over de instellingen. Open de LCD-monitor. . 1 0 PHOTO gaat aan als er een stilstaand beeld wordt opgenomen. OPMERKING : Afhankelijk van het onderwerp en de opnamecondities wordt de opname mogelijk niet goed gemaakt, zelfs niet in de Intelligent Auto-modus. .
Opnemen Aanwijzingen tijdens de opname van stilstaande beelden o Scènes van Intelligent Auto Pictogram weergeven Beschrijving Legt de huid prachtig vast. V Zorgt ervoor dat men op natuurlijke wijze wordt vastgelegd. f Neem een groep mensen op met de meest geschikte instellingen. W Neem het glimlachende gezicht duidelijk op. S Neemt op wanneer gericht op een voorwerp nabij. a Focust op lange afstand en legt een scherp beeld vast met levendige kleuren.
Opnemen Bedieningsknoppen voor de opname van stilstaande beelden Gebruik van de Stille modus In de Stille modus wordt de LCD-monitor zwart en worden er geen geluiden weergegeven. Gebruik deze stand om in stilte opnamen te maken in donkere ruimtes, zoals tijdens een voorstelling. 0 T verschijnt als ”STILLE MODUS” is ingesteld op ”AAN”. 0 Het licht wordt uitgeschakeld wanneer ”STILLE MODUS” ingesteld is op ”AAN”. o Bedieningsprocedure A Tik op ”MENU”. .
Opnemen Afhankelijk van de opnamecondities kunnen de vier hoeken van het scherm donker lijken, maar dit is geen storing. Wijzig in dit geval de opnamecondities door de zoomhendel te verplaatsen enz. Zoomen De gezichtshoek kan worden aangepast met de zoom. 0 Gebruik de W-zijde (grote-hoekzijde) om op te nemen in een groter gezichtsveld. 0 Gebruik de T-zijde (tele-opnamezijde) om het op te nemen onderwerp te vergroten. . 0 0 .
Opnemen Handmatig opnemen 5 Tik op het item dat handmatig moet worden ingesteld. U kunt instellingen zoals helderheid wijzigen als u de handmatige stand gebruikt. Handmatig opnemen kan zowel in de videostand als in de stilstaand beeldstand worden ingesteld. *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. . 1 Zie het ”Menu Handmatig opnemen” voor meer informatie over de verschillende handmatige instellingen. . 0 0 0 Selecteer de stand Handmatig opnemen. .
Opnemen Menu Handmatig opnemen Opnemen in overeenstemming met de scène (onderwerp) De volgende items kunnen worden ingesteld. Veel voorkomende scènes kunnen worden opgenomen met de meest geschikte instellingen. *Het scherm hieronder is van een model met Wi-Fi-functies. Naam Beschrijving SCENE SELECTEREN Er kunnen gemakkelijk onder de opnameomstandigheden passende opnamen worden gemaakt. ”Opnemen in overeenstemming met de scène (onderwerp)” (A pag.
Opnemen Tik op de gepaste scène. * Het beeld is alleen een indruk. Instelling Effect b NACHT Verhoogt de gevoeligheid en maakt de scène automatisch helderder met een trage sluiter in een donkere omgeving. Gebruik een statief om te vermijden dat de camera schudt. g SPOTLICHT Voorkomt dat een menselijk onderwerp te helder wordt weergegeven onder licht. . Tik op ”UIT” om de selectie te annuleren. Tik op L om het menu af te sluiten. . 0 0 .
Opnemen Focus handmatig aanpassen Gebruik deze instelling als de scherpstelling niet duidelijk is in Intelligent Auto of als u een handmatige scherpstelling wenst. *Het scherm hieronder is van een model met Wi-Fi-functies. Selecteer de stand Handmatig opnemen. . 1 Pas de scherpstelling aan. . 6 Tik als de modus P Intelligent Auto is op P op het opnamescherm om het scherm van de modusoverschakeling weer te geven. Tik op H om de opnamemodus over te schakelen op Handmatig. .
Opnemen Helderheid aanpassen 5 Tik op ”HANDMATIG”. 6 Pas de helderheidswaarde aan. U kunt de helderheid aanpassen op het gewenste niveau. *Het scherm hieronder is van een model met Wi-Fi-functies. Selecteer de stand Handmatig opnemen. . . 1 Tik als de modus P Intelligent Auto is op P op het opnamescherm om het scherm van de modusoverschakeling weer te geven. Tik op H om de opnamemodus over te schakelen op Handmatig. . 0 0 0 0 Tik op ”INSTEL” om te bevestigen. .
Opnemen Tegenlichtcompensatie instellen 5 Tik op ”AAN” of ”AVANCEREN”. U kunt het beeld corrigeren als het onderwerp te donker wordt weergegeven omwille van het tegenlicht. *Het scherm hieronder is van een model met Wi-Fi-functies. Selecteer de stand Handmatig opnemen. . 1 0 . 0 ”AVANCEREN” is ontworpen om een efficiëntere tegenlichtcompensatie toe te passen. Kies deze optie wanneer de tegenlichtcompensatie niet goed is aangepast met ”AAN”. Na de instelling verschijnt het tegenlichtpictogram l.
Opnemen Witbalans instellen 5 Tik op de gepaste opnameomgeving. U kunt de kleurtoon instellen om deze af te stemmen op de lichtbron. *Het scherm hieronder is van een model met Wi-Fi-functies. Selecteer de stand Handmatig opnemen. . 1 0 . 0 Tik als de modus P Intelligent Auto is op P op het opnamescherm om het scherm van de modusoverschakeling weer te geven. Tik op H om de opnamemodus over te schakelen op Handmatig.
Opnemen Close-up-opnamen maken 4 Tik op ”MACRO”. . Met de tele macro-functie kunt u close-up-opnamen maken van een onderwerp. *Het scherm hieronder is van een model met Wi-Fi-functies. . 0 0 * Het beeld is alleen een indruk. Selecteer de stand Handmatig opnemen. 5 Tik op ”AAN”. . 1 Tik op L om het menu af te sluiten. Tik op J om terug te keren naar het vorige scherm. 0 . Tik als de modus P Intelligent Auto is op P op het opnamescherm om het scherm van de modusoverschakeling weer te geven.
Opnemen Opnemen met effecten Detecteert gezichten en zorgt dat er decoraties zoals een kronen of een zonnebril worden toegevoegd. ”Opnemen met gezichtsdecoraties (GEZ.VERSIEREFFECT)” (A pag. 44) STEMPEL Neemt video op met verschillende decoratieve stempels. ”Opnemen met decoratieve stempels (STEMPEL)” (A pag. 45) HANDSCHRIFTEFFECT Neemt video´s op met uw persoonlijke handschrift of tekening. ”Opnemen met persoonlijk handschrift (HANDSCHRIFTEFFECT)” (A pag. 46) Open de LCD-monitor. . GEZ.
Opnemen 0 0 42 Druk nog eens om te stoppen. Tik op ”INSTEL” om opnieuw een ander effect te selecteren nadat u op J hebt getikt. Tik op L om ”ANIMATIE-EFFECT” af te sluiten. (Tik op L om eerst het ”ANIMATIE-EFFECT” te annuleren en andere handelingen dan opnamen uit te voeren.
Opnemen Tijdens de instelling Na de instelling Opmerking . . Animatie (effect) verschijnt als glimlachen worden gedetecteerd. . . Animatie (effect) verschijnt als glimlachen worden gedetecteerd. . . Animatie (effect) verschijnt als glimlachen worden gedetecteerd. . . Animatie (effect) verschijnt als glimlachen worden gedetecteerd. . . Animatie (effect) verschijnt als het scherm wordt aangeraakt. . . Animatie (effect) verschijnt als het scherm wordt aangeraakt. . .
Opnemen Opnemen met gezichtsdecoraties (GEZ.-VERSIEREFFECT) 5 Selecteer een gewenst effect en tik op ”INSTEL”. Detecteert gezichten en zorgt dat er decoraties zoals een kronen of een zonnebril worden toegevoegd. *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. . 1 0 0 . 0 0 0 Tik op ”MENU”. . 2 Kijk of de opnamemodus A is. Tik als de modus B stilstaand beeld is op B op het opnamescherm om het scherm van de modusoverschakeling weer te geven.
Opnemen Opnemen met decoratieve stempels (STEMPEL) 6 Kies een stempel. Neemt video op met verschillende decoratieve stempels. *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. . 1 Tik op K om een stempel te selecteren. Tik op het gewenste stempel. Het cijfer geeft de afmeting van het stempel aan. 0 0 0 Tik op I om door de lijst met stempels te bladeren. Tik op M om de grootte van de stempels te wijzigen. Tik op J om terug te keren naar het vorige scherm. .
Opnemen Opnemen met persoonlijk handschrift (HANDSCHRIFTEFFECT) 6 Kies een lijn. Neemt video´s op met uw persoonlijke handschrift of tekening. *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. . 1 Tik op G om de lijnkleur en -dikte te selecteren. Het cijfer geeft de dikte van de lijn aan. 0 0 0 U kunt een kleur selecteren tussen wit, grijs, zwart, enz. Selecteer P om een deel van de lijn aan te tikken en te wissen. Tik op H om de lijnkleur te selecteren.
Opnemen ”PRIORIT. AANR. AE/AF” is een functie die de scherpstelling en de helderheid aanpast op basis van een aangetikte positie. Door het gezicht van een persoon op voorhand te registreren, kunt u de tracering van deze persoon activeren, zelfs zonder een specifieke selectie tijdens de opname. Deze functie is zowel voor video’s als voor stilstaande beelden beschikbaar. *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. 0 0 Tik op L om het menu af te sluiten.
Opnemen 6 . Tik op de gewenste instelling. OPMERKING : Wanneer ”PRIORIT. AANR. AE/AF” is ingesteld, wordt ”FOCUS” automatisch ingesteld op ”AUTOM”. 0 Tik opnieuw op de geselecteerde positie (gezicht/kleur/gebied) om de instelling te annuleren. (De instelling blijft geldig voor geregistreerde gezichten.) 0 Tik op een niet-geselecteerde positie (gezicht/kleur/gebied) om te resetten. 0 Als de camera een onderwerp uit het oog verliest, tikt u opnieuw op het onderwerp.
Opnemen Smiles automatisch vastleggen (SMILE-OPNAME) 1 . ”SMILE-OPNAME” legt automatisch een stilstaand beeld vast na de detectie van een smile. Deze functie is zowel voor video’s als voor stilstaande beelden beschikbaar. Stel ”PRIORIT. AANR. AE/AF” in op ”GEZICHTSTRACERING” voor u ”SMILE-OPNAME” selecteert. ”Onderwerpen duidelijk in beeld brengen (PRIORIT. AANR. AE/AF)” (A pag. 47) *Het scherm hieronder is van een model met Wi-Fi-functies. 0 0 Open de LCD-monitor. Tik op ”AAN”.
Opnemen Automatisch huisdieren in beeld brengen (OPNAME HUISDIER) 6 Tik op ”AAN”. ”OPNAME HUISDIER” legt automatisch een stilstaand beeld vast als het gezicht van een huisdier, zoals een hond of kat waargenomen wordt. Deze functie is zowel voor video’s als voor stilstaande beelden beschikbaar. *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. . 1 0 Richt de camera op het huisdier.
Opnemen OPMERKING : De camera kan maximaal 6 gezichten van huisdieren detecteren. ”OPNAME HUISDIER” werkt mogelijk niet goed, afhankelijk van het soort huidsdier, de opnamecondities (afstand, helderheid enz.) en het onderwerp (richting van gezicht enz.). Het is ook bijzonder moeilijk om gezichten van huisdieren te detecteren die helemaal zwart zijn, bedekt zijn met lang haar of zich in tegenlicht bevinden. 0 Soms kan er per ongeluk een onderwerp anders dan uw huisdier gedetecteerd worden.
Opnemen Als het gezicht van een persoon op voorhand wordt geregistreerd, kunnen de focus en de helderheid automatisch worden aangepast met de gezichtstraceringsfunctie. Er kunnen maximaal 6 gezichten worden geregistreerd, samen met de namen en prioriteitsniveaus. Het wordt aanbevolen om vooraf de gezichten te registreren die vaak worden opgenomen door deze camera. *Het scherm hieronder is van een model met Wi-Fi-functies. 6 Richt de camera op het menselijke onderwerp. Open de LCD-monitor. . 1 .
Opnemen Raak tweemaal ”JKL” aan F Raak tweemaal ”DEF” aan F Raak tweemaal ”MNO” aan . 13 Tik op het gewenste prioriteitsniveau, en tik vervolgens op ”REGIST”. 0 0 Draai het gezicht langzaam terwijl u naar de camera kijkt. Er is een geluid hoorbaar wanneer de opname is voltooid voor elke richting. (4 keer in totaal) Herhaal deze stap tot de opname (registratie) is voltooid voor alle richtingen. De registratie van de vier richtingen kan ook mislukken, afhankelijk van de opnameomgeving.
Opnemen GLIMLACH%/NAAM BEELDSCHERM instellen 6 Tik op de gewenste instelling. Met ”WEERGAVE SMILE%/NAAM” kunt u de items laten weergeven wanneer er gezichten worden gedetecteerd. Dit item wordt alleen weergegeven als ”PRIORIT. AANR. AE/AF” is ingesteld op ”GEZICHTSTRACERING”. ”Onderwerpen duidelijk in beeld brengen (PRIORIT. AANR. AE/AF)” (A pag. 47) *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. .
Opnemen De geregistreerde gezichtsinformatie bewerken 6 Tik op het item dat moet worden bewerkt. U kunt de naam, het prioriteitsniveau en de gezichtsinformatie die zijn geregistreerd wijzigen. *Het scherm hieronder is van een model met Wi-Fi-functies. Tik op ”MENU”. . 1 Ga als u ”OPNIEUW OPNEMEN” selecteert door naar stap 6 in ””Persoonlijke authentificatie-informatie van menselijk gezicht registreren” (A pag. 52) ”.
Opnemen 4 Tik op ”ANN.”. Vermindering van het schudden van de camera Wanneer de beeldstabilisator ingesteld is, kan het schudden van de camera tijdens het opnemen van video’s effectief gereduceerd worden. Open de LCD-monitor. 2 Druk op de a-knop om de instelling te wijzigen. . 1 Tik op de persoon van wie de registratie moet worden geannuleerd. . . 5 Tik op ”INSTEL”. 0 De instelling van de beeldstabilisator verandert bij elke druk. Instelling 7 Tik op ”JA”. Schakelt beeldstabilisator uit.
Opnemen De video markeren tijdens het opnemen U kunt een specifieke scène markeren terwijl u een video opneemt. Wanneer een markering wordt aangebracht, wordt de gemarkeerde positie opgenomen om de positie gemakkelijker terug te vinden en te beginnen met het afspelen van een overzicht. 0 De markeringsfunctie kan alleen worden gebruikt voor video’s die worden opgenomen in AVCHD-formaat. (Video’s opgenomen in iFrame-formaat worden niet ondersteund.) (GZ-EX515/GZ-EX510) 1 Open de LCD-monitor.
Opnemen 4 Tik op ”HIGH-SPEED-OPNAME”. Met tussenpozen opnemen (TIMELAPSE OPNAME) Met deze functie kunnen de veranderingen in een scène die zich langzaam voordoen over een lange periode worden weergegeven in een korte periode door op bepaalde intervallen beelden ervan te gebruiken. Dit is nuttig voor waarnemingen zoals het openen van een bloemknop. *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. . 1 Tik op ”AAN”. . 5 . 0 0 0 0 Start met opnemen. 2 Tik op ”MENU”. .
Opnemen 5 Tik om een tussenpoos van de opname te selecteren (1 tot 80 seconden). Instelling van time-lapse Hoe groter het aantal seconden, hoe langer de tussenpozen van de opname. . Instelling 0 0 0 0 UIT Deactiveert de functie. 1SEC INTERVAL Neemt een beeld op met tussenpozen van 1 seconde. Opgenomen video’s worden afgespeeld op een snelheid van 25x. 2SEC INTERVAL Neemt een beeld op met tussenpozen van 2 seconde. Opgenomen video’s worden afgespeeld op een snelheid van 50x.
Opnemen Stop-Motion video’s opnemen (STOPBEWEGING OPN.) 5 Tik op ”AAN”. Als de knop SNAPSHOT wordt ingedrukt, worden er 2 frames van stilstaande beelden opgenomen, en worden er stop-motion video’s gemaakt door deze beelden samen te voegen. *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. . 1 0 Druk op de knop SNAPSHOT om te beginnen met opnemen. . 6 De ”STOP-BEWEGING OPNAMEMODUS.DRUK OP MOMENTOPNAME OM HETBEELD VAST TE LEGGEN” verschijnt.
Opnemen Met deze functie kan het apparaat automatisch opnemen als het binnen het rode frame dat wordt weergegeven op de LCD-monitor veranderingen detecteert in de bewegingen (helderheid) van het onderwerp. Deze functie kan zowel in de videostand als in de stilstaand beeld-stand worden ingesteld. *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. . 1 .
Opnemen 7 De opname start automatisch wanneer het onderwerp in het rode frame beweegt. Groepsopnamen maken (zelfontspanner) De zelfontspanner van 10 seconden en de zelfontspanner van de gezichtsdetectie zijn aangewezen functies voor het maken van groepsfoto’s. De zelfontspanner van 2 seconden is nuttig voor het vermijden van een schuddende camera bij het indrukken van de sluiterknop. *Het scherm hieronder is van een model met Wi-Fi-functies. OPMERKING : .
Opnemen 5 Tik op ”ZELFONTSPANNER”. Gebruik van de zelfontspanner van de gezichtsdetectie Als de SNAPSHOT knop wordt ingedrukt, wordt de gezichtsdetectie gestart, en en wordt drie seconden nadat een andere persoon het frame binnenkomt een opname gemaakt. Deze functie is nuttig als de fotograaf ook wil verschijnen op de groepsfoto. Open de LCD-monitor en selecteer de stilstaand beeld-stand. . 1 0 0 Tik op ”2 SEC” of ”10 SEC”. . 6 Tik op L om het menu af te sluiten.
Opnemen Video’s opnemen met datum en tijd U kunt video’s samen met de datum en tijd opnemen. Selecteer deze instelling wanneer u het bestand wilt opslaan met weergave van de datum en tijd. (De datum en tijd kunnen niet worden verwijderd na de opname). *Het scherm hieronder is van een model met Wi-Fi-functies. Open de LCD-monitor. . 1 7 . . Druk op de SNAPSHOT-knop nadat u zich ervan verzekerd hebt dat iedereen naar de camera kijkt. 0 0 Tik op ”MENU”. . 2 Kijk of de opnamemodus A is.
Opnemen 6 Selecteer het type klok met 0 of 1, en tik op ”INSTEL”. Resterende opnametijd controleren U kunt de resterende opnametijd op de SD-kaart en ook het resterende vermogen van de accu bekijken. Open de LCD-monitor. . 1 0 0 Pas de weergavepositie van het scherm met datum en tijd met een vingermarkering aan door deze aan te raken met uw vinger en ze te verslepen. . 7 Wanneer ”INSTEL” wordt aangetikt, verschijnt de waarschuwing voor de opname van de datum/tijd.
Opnemen Geschatte video-opnametijd Beeldkwaliteit SDHC/SDXC-kaart 4GB 8GB 16GB 32GB 48GB 64GB 128GB UXP 20 m 40 m 1 u 20 m 2 u 50 m 4 u 10 m 5 u 40 m 11 u 30 m XP 30 m 1u 2u 4u 6u 8 u 10 m 16 u 20 m SP 40 m 1 u 20 m 2 u 50 m 5 u 50 m 8 u 30 m 11 u 30 m 23 u 10 m EP 1 u 40 m 3 u 30 m 7 u 10 m 14 u 40 m 21 u 30 m 28 u 50 m 57 u 50 m SSW 1 u 20 m 2 u 40 m 5 u 30 m 11 u 20 m 16 u 40 m 22 u 20 m 44 u 50 m SEW 2 u 50 m 5 u 40 m 11 u 30 m 23 u 30 m 34 u 30 m 46
Opnemen Geschatte Opnametijd (met gebruik van de accu) o 50i-stand (GZ-EX515/GZ-EX510) Accupack Effectieve opnametijd Doorlopende opnametijd (Maximale opnametijd) BN-VG114E (bijgeleverd) 1u 1 u 50 m BN-VG121E 1 u 30 m 2 u 45 m BN-VG138E 2 u 40 m 4 u 55 m o 50p-stand (GZ-EX515/GZ-EX510) Accupack Effectieve opnametijd Doorlopende opnametijd (Maximale opnametijd) BN-VG114E (bijgeleverd) 45 m 1 u 25 m BN-VG121E 1 u 10 m 2 u 10 m BN-VG138E 2u5m 3 u 50 m o GZ-E509/GZ-E505 Accupack Effecti
Afspelen Video’s afspelen LET OP : De volgende vormen van afspelen zijn mogelijk met dit toestel. Onderdeel Beschrijving Normale weergave Speelt de opgenomen video’s af. Afspelen markeren (Afspelen markeren/spel afspelen) De scènes die gemarkeerd zijn tijdens de opname van de video en de scorescènes die zijn opgenomen in de spelopnamestand (met de smartphone-applicatie) kunnen worden gezocht.
Afspelen Normale weergave Bedieningsknoppen voor Videobeelden afspelen Speelt de opgenomen video’s af. *Het scherm hieronder is van een model met Wi-Fi-functies. Tijdens weergave van indexscherm Open de LCD-monitor. . 1 Display . 0 0 Tik op ”<
Afspelen Tijdens het afspelen van videobeelden De datum en tijd van de opname kunnen worden weergegeven op het scherm tijdens het afspelen. ” DATUM/TIJD WEERGEVEN ” (A pag. 219) 0 0 Geeft het geschatte resterende vermogen van de accu weer tijdens het gebruik. Het volume van video’s aanpassen . . U kunt de zoom/volumehendel gebruiken om het volume te regelen. 0 De bedieningsknoppen op het aanraakscherm verdwijnen als het apparaat niet wordt gebruikt gedurende 5 seconden.
Afspelen De opnamedatum en andere informatie bekijken MARKERING AFSPELEN U kunt de informatie over de opname zien van de opgenomen video’s. De scènes die gemarkeerd zijn tijdens de opname van de video en de scorescènes die zijn opgenomen in de spelopnamestand (met de smartphone-applicatie) kunnen worden gezocht. Gemarkeerde scènes en goalscènes kunnen ook worden geselecteerd voor het afspelen, en geselecteerde scènes kunnen worden opgeslagen als een afspeellijst.
Afspelen Aanwijzingen tijdens het afspelen van markeringen . Tijdens het normaal afspelen van markeringen 0 Selecteer het type van de ”MARKEREN”. . 6 Tik op ”ALLE SCENES” om alle scènes af te spelen. . Display Overzicht afspelen start. . 7 A Toets markering wissen Wist de markering die momenteel wordt weergegeven. B Toets markering tijdens afspelen Een markering invoeren tijdens het afspelen. C Verstreken tijd Geeft de afspeeltijd van de video weer.
Afspelen WEDSTRIJD AFSPELEN (GZ-EX515/GZ-EX510) 0 0 1 Spel afspelen is een functie voor het afspelen van goalscènes en/of een gemarkeerde scène die is opgenomen met de smartphone-applicatie Everio sync. 2. Tik om te beginnen op J op het afspeelscherm. Zie ”Instellingen van score van spel” (A pag. 172) voor de spelopnamestand. Open de LCD-monitor. . 0 0 0 Het afspelen stopt nadat alle scènes zijn afgespeeld.
Afspelen ”P”-pictogram wordt weergeven Geeft aan dat de opname van de score bezig is. F Spelafspeelstand Geeft aan dat het afspelen van het spel bezig is. G Score Geeft de score van het spel weer (wordt alleen weergegeven als de score geregistreerd is.) De gemarkeerde afspeelpositie aanpassen Geeft de tijdsduur op voor en na de gemarkeerde positie voor het afspelen van de gemarkeerde video. De maximale tijdsduur voor het afspelen is 20 seconden per markering. 1 Open de LCD-monitor.
Afspelen 6 Selecteer de afspeeltijd per scène. SELECTIE AFSPELEN U kunt een overzicht van opgenomen video’s afspelen (Overzicht afspelen). Dit is nuttig om de inhoud van video’s snel te bekijken. Open de LCD-monitor. . 1 0 . Pas de afspeelpositie aan. 0 0 Kijk of de opnamemodus A is. Tik als de modus B stilstaand beeld is op B op het opnamescherm om het scherm van de modusoverschakeling weer te geven. Tik op A om de modus over te schakelen op video.
. . Afspelen 0 0 0 0 Tik om een scène te selecteren voor Overzicht afspelen. . 7 Tik op ”VOLGENDE” na het selecteren van een datum. Wanneer ”ALLES” is aangetikt, wordt Overzicht afspelen uitgevoerd voor alle datums. Tik op L om het menu af te sluiten. Tik op J om terug te keren naar het vorige scherm. 0 8 Er wordt een foutmelding weergegeven als er geen scène wordt gevonden. Selecteer een andere scène of tik op ”AUTOM”. Selecteer de tijd voor Overzicht afspelen .
Afspelen o Soorten Overzicht afspelem Selecteer de soorten Overzicht afspelen uit de volgende mogelijkheden. Wanneer ”AUTOM” is geselecteerd, wordt bij het afspelen de video ingekort tot de vooraf ingestelde tijdsduur. Onderdeel AFSPEELLIJST AFSP. Speelt de afspeellijsten die u hebt gemaakt af. 1 Open de LCD-monitor. Nadere bijzonderheden De video wordt bij het afspelen ingekort tot de vooraf ingestelde tijdsduur.
Afspelen 0 Afspelen van de afspeellijst start. ”Bedieningsknoppen voor Videobeelden afspelen” (A pag. 69) 0 0 0 Tik op u om terug te keren naar het indexscherm. Tik op ”CONTR.” en selecteer een afspeellijst om de inhoud ervan te controleren. Tik na de controle op J. De afspeellijsten met een O pictogram (Overzicht afspelen) zijn de afspeellijsten die werden gemaakt tijdens Overzicht afspelen. AFSP.
Afspelen 6 Tik op het bestand om het afspelen te starten. Stilstaande beelden weergeven U kunt de opgenomen stilstaande beelden selecteren en weergeven via een indexscherm (miniatuurscherm). Open de LCD-monitor. . 1 ”Bedieningsknoppen voor Videobeelden afspelen” (A pag. 69) OPMERKING : . 0 0 Kijk of de opnamemodus B is. Tik als de modus A video is op A op het opnamescherm om het scherm van de modusoverschakeling weer te geven. Tik op B om de modus over te schakelen op stilstaand beeld.
Afspelen Bedieningsknoppen voor de weergave van stilstaande beelden Tijdens de weergave van stilstaande beelden . Tijdens weergave van indexscherm De bedieningsknoppen op het aanraakscherm verdwijnen als het apparaat niet wordt gebruikt gedurende 5 seconden. Tik op het scherm om de bedieningsknoppen opnieuw weer te geven. . 0 Display Beschrijving A Video/stilstaand beeld-stand A/B Schakelt tussen de video- en stilstaand beeldstand.
Afspelen Diavoorstelling afspelen Stilstaande afbeeldingen kunnen worden weergegeven in een diavoorstelling. Tik op I tijdens het afspelen van de stilstaande beelden om de diavoorstelling te starten. Zoeken naar een specifieke video/stilstaand beeld op datum Als er een groot aantal opgenomen video’s en stilstaande beelden is, kan het moeilijk zijn om het gewenste bestand te vinden op het indexscherm. Gebruik de zoekfunctie om het gewenste bestand te zoeken.
Afspelen 5 Tik op het bestand om het afspelen te starten. Aansluiten en weergeven op TV U kunt dit apparaat aansluiten op een TV voor het afspelen. De beeldkwaliteit op TV varieert afhankelijk van het type TV en de verbindingskabel. Selecteer de meest geschikte connector voor uw TV. 0 Raadpleeg ook de handleiding van de gebruikte TV. ”Aansluiten via de HDMI Mini Connector” (A pag. 83) ”Aansluiten via de AV-connector” (A pag.
Afspelen Aansluiten via de HDMI Mini Connector OPMERKING : Als u een HDTV heeft, kunt u uw opnames met een HDMI Mini-kabel in HDkwaliteit afspelen. 0 Gebruik een HDMI-hogesnelheidsminikabel zoals de HDMI-minikabel. 0 Raadpleeg ook de handleiding van de gebruikte TV. 0 1 Wijzig de instellingen in ”HDMI-OUTPUT” in overeenstemming met de verbinding. ” HDMI-OUTPUT ” (A pag. 226) 0 Verbind met een TV. .
Afspelen Bedienen in combinatie met TV via HDMI Aansluiten via de AV-connector Als u dit apparaat met de HDMI Mini-kabel aansluit op een TV waarop HDMICEC kan worden gebruikt, kunt u gekoppelde bewerkingen met de TV uitvoeren. 0 HDMI-CEC (Consumer Electronics Control) is een industrienorm die de interoperabiliteit mogelijk maakt tussen apparaten die compatibel zijn met HDMI-CEC en die verbonden zijn via HDMI-kabels.
Bewerken Ongewenste bestanden wissen Wis ongewenste video’s en stilstaande beelden als er niet veel ruimte meer beschikbaar is op het opnamemedium. Als u dit doet, wordt er meer ruimte vrijgemaakt op het opnamemedium. ”Het bestand dat op het scherm staat wissen” (A pag. 85) ”De geselecteerde bestanden wissen” (A pag. 85) OPMERKING : De geselecteerde bestanden wissen Wist de geselecteerde bestanden. LET OP : 0 1 Gewiste bestanden kunnen niet worden hersteld. Open de LCD-monitor.
Bewerken 5 Tik op ”INSTEL”. Bestanden beveiligen Vermijd dat belangrijke video’s/stilstaande beelden ongewild worden gewist door ze te beveiligen. ”Het bestand dat op het scherm staat beveiligen/de beveiliging ervan opheffen” (A pag. 86) ”Geselecteerde bestanden beveiligen/de beveiliging ervan opheffen” (A pag. 87) LET OP : . 0 6 Tik op ”UITVOEREN” om het wissen te bevestigen. Als het opnamemedium wordt geformatteerd, worden zelfs de beveiligde bestanden gewist.
Bewerken Geselecteerde bestanden beveiligen/de beveiliging ervan opheffen 6 Tik op de bestanden die moeten worden beveiligd of waarvan de beveiliging moet worden opgeheven. Beveiligt de geselecteerde bestanden of heft de beveiliging ervan op. Open de LCD-monitor. . 1 P verschijnt op de geselecteerde bestanden. Tik opnieuw op een bestand om P te verwijderen van dit bestand. 0 I en P worden weergegeven op de bestanden die al beveiligd zijn.
Bewerken Een stilstaand beeld vastleggen in de video tijdens het afspelen U kunt stilstaande beelden vastleggen van de scènes in de opgenomen video’s die u leuk vindt. 1 Open de LCD-monitor. Een vereist deel vastleggen in de video (WORDT BIJGEWERKT) Selecteer het gewenste stuk van een video en sla het op als een nieuw videobestand. 0 De oorspronkelijke video blijft op de bestaande locatie. Open de LCD-monitor. . 1 2 Kijk of de opnamemodus A is.
Bewerken Tik op de video die moet worden bewerkt. . 6 7 Tik op e om het afspelen te pauzeren op het gewenste startpunt, en tik vervolgens op ”A”. Afspeellijsten maken met de opgenomen video’s Een lijst die u samenstelt door uw favoriete video’s te selecteren uit de opgenomen video’s, wordt een afspeellijst genoemd. Als u een afspeellijst maakt, kunt u alleen uw favoriete video’s afspelen in de gewenste volgorde.
Bewerken 5 Tik op ”AFSPEELLIJST BEWERK.”. 9 Tik op ”TOEV.” en voeg het videobeeld in. . Tik op ”BEWERKEN”. . 4 0 0 0 0 0 0 . Tik op ”NIEUWE LIJST”. 7 Tik op ”VAN SCENE MAKEN”. 8 Tik op de video die moeten worden toegevoegd aan de afspeellijst. 10 Tik na het ordenen op ”OPSL.”. . . 6 Herhaal stappen 8-9 en orden de video’s in de afspeellijst. Selecteer om de positie van een video in de afspeellijst (onderste rij) te wijzigen met E/F het invoegingspunt na stap 8, en tik op ”TOEV.” .
Bewerken Afspeellijsten maken op datum Een afspeellijst maken door meerdere bestanden te ordenen volgens opnamedatum. Open de LCD-monitor. . 1 Tik op ”MAKEN OP DATUM”. 8 Tik op de video van de datum als deze moet worden toegevoegd aan de afspeellijst. . 7 Kijk of de opnamemodus A is. Tik als de modus B stilstaand beeld is op B op het opnamescherm om het scherm van de modusoverschakeling weer te geven. Tik op A om de modus over te schakelen op video. .
Bewerken 11 Tik op ”JA”. Afspeellijsten bewerken U kunt de inhoud van een aangemaakte afspeellijst wijzigen. De afspeellijsten die met Overzicht afspelen gemaakt zijn, kunnen echter niet gewijzigd worden. Open de LCD-monitor. . 1 OPMERKING : Tik op elk scherm op L om het menu af te sluiten. . 0 0 0 Kijk of de opnamemodus A is. Tik als de modus B stilstaand beeld is op B op het opnamescherm om het scherm van de modusoverschakeling weer te geven. Tik op A om de modus over te schakelen op video.
Bewerken Tik op ”BEWERKEN”. 7 Tik op de afspeellijst die moeten worden bewerkt, en tik op ”VOLGENDE”. 8 Tik op de video (bovenste rij) die moeten worden geordend in de afspeellijst. 10 Tik na het ordenen op ”OPSL.”. . . 6 OPMERKING : 0 Tik op elk scherm op L om het menu af te sluiten. . . . 11 Tik op ”JA”. 0 0 0 0 Tik op ”TOEV.” en voeg het videobeeld in. . 9 d verschijnt op de geselecteerde video. Tik op J om de selectie ongedaan te maken.
Bewerken Afspeellijsten wissen Wis de afspeellijsten die u hebt gemaakt. Tik op ”WISSEN”. 7 Tik op de afspeellijst die moeten worden gewist, en tik op ”VOLGENDE” . Open de LCD-monitor. . . 1 6 0 0 Tik op ”<
Kopiëren Een disk maken met een aangesloten Bluray-recorder U kunt disks maken met een Blu-ray-recorder door deze met een USB-kabel aan te sluiten op dit apparaat. Verwijder de lichtnetadapter en het accupack uit dit apparaat. 2 Open de LCD-monitor. U kunt video’s dubben in standaardkwaliteit door verbinding te maken met een DVD-recorder. 0 Raadpleeg ook de handleiding van de TV en de DVD-recorder. 1 Verwijder de lichtnetadapter en het accupack uit dit apparaat. 2 Open de LCD-monitor.
Kopiëren OPMERKING : AV-kabel (P/N QAM1322-001) De bedradingsspecificaties (voor video/audio) van de 4-polige mini-stekker worden hieronder beschreven. Raadpleeg voor een aankoop het JVC-servicecentrum in uw buurt. Bestanden dubben naar een VHS-tape door aansluiting op een VCR U kunt video’s dubben in standaardkwaliteit door verbinding te maken met een videorecorder. 0 Raadpleeg ook de handleiding van de TV en de videorecorder. 1 Verwijder de lichtnetadapter en het accupack uit dit apparaat.
Kopiëren OPMERKING : . 0 AV-kabel (P/N QAM1322-001) De bedradingsspecificaties (voor video/audio) van de 4-polige mini-stekker worden hieronder beschreven. Raadpleeg voor een aankoop het JVC-servicecentrum in uw buurt. OPMERKING : Als u veel video’s wilt dubben, kunt u op voorhand een afspeellijst maken en deze afspelen, zodat al uw favoriete video’s in één keer worden gedubd. ”Afspeellijsten maken met geselecteerde bestanden” (A pag. 89) ” AFSPEELLIJST AFSP. ” (A pag.
Kopiëren Bezig met kopiëren naar Windows-pc (GZ-EX515/GZ-EX510) U kunt bestanden naar een computer kopiëren met behulp van de meegeleverde software. Disks kunnen ook worden aangemaakt met de DVD of Blu-ray-schijfeenheid van de computer. Als de bijgeleverde software niet is geïnstalleerd, wordt dit apparaat bij aansluiting herkend als een extern opslagmedium.
Kopiëren De meegeleverde software installeren U kunt de opgenomen beelden weergeven in kalenderformaat en montagebewerkingen uitvoeren met de bijgeleverde software. Windows Vista/Windows 7 0 Raadpleeg de bedieningsinstructies in de animatie op de Uitgebreide gebruikshandleiding. Windows XP 0 Raadpleeg de bedieningsinstructies in de animatie op de Uitgebreide gebruikshandleiding.
Kopiëren Een back-up maken van bestanden Controleer voor u een backup maakt of er genoeg vrije ruimte is op de harde schijf (HDD) van de computer. De backup wordt niet gestart als er niet voldoende vrije ruimte is. Verwijder de lichtnetadapter en het accupack uit dit apparaat. 2 Open de LCD-monitor. . 1 . 0 Sluit de USB-kabel en de lichtnetadapter aan. 7 Klik na de selectie op ”Volgende”. 8 Klik op ”Yes” om de back-up te starten. .
Kopiëren Dit apparaat loskoppelen van de computer Video’s opnemen op disks 1 1 Plaats een nieuwe disk in het DVD- of Blu-ray-station van de pc waarmee opnamen kunnen worden gemaakt. 2 Klik op ”Schijf” om het disktype te selecteren. 3 Selecteer de datum waarop de video’s die u wenst op te slaan op de disk opgenomen werden. 4 Selecteer de bestanden die moeten worden opgeslagen. 5 Klik op ”Volgende”. (voor Windows Vista) Klik op ”OK”. 4 Koppel de USB-kabel los en sluit de LCD-monitor. . 3 .
Kopiëren Orden de bestanden in de gewenste volgorde. 7 Klik op ”Creëer schijf”. 8 Klik na het kopiëren op ”Annuleren”. . . . 6 0 102 Klik op ”Annuleren” om het creëren van de disk te beëindigen. OPMERKING : De volgende disktypen kunnen worden gebruikt op de bijgeleverde software LoiLoFit for Everio. DVD-R DVD-R DL DVD-RW 0 Voor een opname op de Blu-ray-disk is een upgrade naar de betaalde versie van LoiLoFit for Everio noodzakelijk. Raadpleeg de volgende link voor nadere bijzonderheden.
Kopiëren Een backup maken van bestanden zonder gebruik van de bijgeleverde software 6 Kopieer de bestanden naar een computer met behulp van de volgende methode. 1 Verwijder de lichtnetadapter en het accupack uit dit apparaat. 2 Open de LCD-monitor. Selecteer ”Computer” (Windows Vista)/”Deze Computer” (Windows XP)/”Computer” (Windows 7) via het menu ”Start”, en klik vervolgens op het pictogram ”JVCCAM_SD”. 0 Open de map met de gewenste bestanden. ”Lijst met bestanden en mappen” (A pag.
Kopiëren Lijst met bestanden en mappen . De mappen en bestanden worden op de SD-kaart gemaakt zoals hieronder is aangegeven. Ze worden alleen aangemaakt als dit noodzakelijk is. LET OP : 0 Als de camera en pc verbonden zijn via een USB-kabel, zijn de opgenomen media alleen-lezen.
Kopiëren Bezig met kopiëren naar Windows-pc (GZ-E509/GZ-E505) U kunt bestanden naar een computer kopiëren met behulp van de meegeleverde software. Disks kunnen ook worden aangemaakt met de DVD of Blu-ray-schijfeenheid van de computer. Als de bijgeleverde software niet is geïnstalleerd, wordt dit apparaat bij aansluiting herkend als een extern opslagmedium.
Kopiëren De bijgeleverde (ingebouwde) software installeren Installatieprocedure U kunt de opgenomen beelden weergeven in kalenderformaat en montagebewerkingen uitvoeren met de bijgeleverde software. o Windows Vista/Windows 7 0 Raadpleeg de bedieningsinstructies in de animatie op de Uitgebreide Voorbereidingen Sluit dit apparaat aan op een computer met een USB-kabel. Verwijder de lichtnetadapter en het accupack uit dit apparaat. 2 Open de LCD-monitor. 3 Sluit de USB-kabel en de lichtnetadapter aan.
Kopiëren Een backup maken van alle bestanden Controleer voor u een backup maakt of er genoeg vrije ruimte is op de harde schijf (HDD) van de computer. De backup wordt niet gestart als er niet voldoende vrije ruimte is. Verwijder de lichtnetadapter en het accupack uit dit apparaat. 2 Open de LCD-monitor. 3 Sluit de USB-kabel en de lichtnetadapter aan. 7 Start de backup. A Maak een verbinding met de bijgeleverde USB-kabel. B Sluit de lichtnetadapter aan op dit apparaat.
Kopiëren Dit apparaat loskoppelen van de computer 1 Klik op ”Hardware veilig verwijderen en media uitwerpen”. Bestanden ordenen Orden uw bestanden nadat u er een backup van hebt gemaakt, door labels toe te voegen, zoals “Familie-uitstap” of “Atletiekontmoeting”. Dit is niet alleen nuttig voor het maken van disks, maar ook voor het bekijken van de bestanden. 1 Dubbelklik op het Everio MediaBrowser 4-pictogram. De bijgeleverde software wordt opgestart.
Kopiëren 4 Klik op de opnamedag. De miniaturen van de bestanden die op die dag werden opgenomen worden weergegeven. De bestanden die werden geordend met behulp van de gebruikerslijst kopiëren naar disks. 1 Plaats een nieuwe disk in het DVD- station van de pc waarmee opnamen kunnen worden gemaakt. 2 Selecteer de gewenste gebruikerslijst. 3 Selecteer het disktype. 4 Selecteer de bestanden die geordend naar de disk moeten worden gekopieerd. .
Kopiëren OPMERKING : De volgende disktypen kunnen worden gebruikt op de bijgeleverde software Everio MediaBrowser 4. DVD-R DVD-R DL DVD-RW DVD+R DVD+R DL DVD+RW 0 De volgende formaten zijn ondersteund door de bijgeleverde software Everio MediaBrowser 4. AVCHD DVD-video* * Om DVD-Video-disks te maken moet de aanvullende software geïnstalleerd worden. Raadpleeg de homepage van Pixela voor nadere bijzonderheden. http://www.pixela.co.
Kopiëren Een backup maken van bestanden zonder gebruik van de bijgeleverde software 6 Kopieer de bestanden naar een computer met behulp van de volgende methode. 1 Verwijder de lichtnetadapter en het accupack uit dit apparaat. 2 Open de LCD-monitor. Selecteer ”Computer” (Windows Vista)/”Deze Computer” (Windows XP)/”Computer” (Windows 7) via het menu ”Start”, en klik vervolgens op het pictogram ”JVCCAM_SD”. 0 Open de map met de gewenste bestanden. ”Lijst met bestanden en mappen” (A pag.
Kopiëren Lijst met bestanden en mappen . De mappen en bestanden worden op de SD-kaart gemaakt zoals hieronder is aangegeven. Ze worden alleen aangemaakt als dit noodzakelijk is. LET OP : 0 Als de camera en pc verbonden zijn via een USB-kabel, zijn de opgenomen media alleen-lezen.
Kopiëren Kopiëren naar Mac-computer Kopieer de bestanden naar een Mac-computer met behulp van de volgende methode. 1 Verwijder de lichtnetadapter en het accupack uit dit apparaat. 2 Open de LCD-monitor. 6 Start iMovie. 0 De volgende bewerkingen moeten worden uitgevoerd op de Maccomputer. LET OP : 0 0 Als de camera en pc verbonden zijn via een USB-kabel, zijn de opgenomen media alleen-lezen. MTS-bestanden die worden gekopieerd naar een Mac-computer kunnen niet worden geïmporteerd in iMovie.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Wi-Fi mogelijkheden Dit apparaat is uitgerust met een Wi-Fi-functie. Via een draadloze verbinding kunt u de volgende handelingen uitvoeren via een smartphone of een computer. Naam van de functie Mogelijkheid DIRECTE MONITORING Via een directe 1-op-1 aansluiting (Wi-Fi Direct) kunt u de beelden van de camera bewaken via een smartphone (of computer), zonder dat u hiervoor een toegangspunt (draadloze LAN-router) nodig heeft.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Bedrijfsomgeving Om het beeld van de camera te kunnen controleren via een computer of smartphone, en om video´s of stilstaande beelden over te zetten, moet voldaan worden aan de volgende vereisten. Android Smartphone en Tablet-apparaat Waarschuwingen bij het gebruik van Wi-Fi Voorzorgsmaatregelen met de Wi-Fi-functie 0 0 A OS: Android2.3 of later (Het is niet gegarandeerd dat dit apparaat werkt met alle modellen.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Het is mogelijk moeilijk communicatie tot stand te brengen als twee kamers of verdiepingen gescheiden zijn door deze materialen. * De communicatie wordt ook zwakker als er zich personen of lichaamsdelen tussen de Wi-Fi-toestellen bevinden. o Maak geen verbinding met draadloze netwerken waarvoor u geen toestemming heeft. Deze verbinding kan beschouwd worden als ongeoorloofde toegang en er worden mogelijk juridische stappen tegen u genomen.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) De smartphone draadloos met de camera verbinden Verbind de smartphone met de camera aan de hand van een van de volgende methodes. o Verbinding door invoeren van het Wi-Fi-wachtwoord 1 Tik op ”MENU”. (Gebruik op deze camera) . Zet de camera in de opnamestand. Selecteer de SSID in stap 5 van het scherm voor de selectie van het WiFi-netwerk van uw smartphone, en voer de PASS in op het wachtwoordscherm. (Gebruik op de smartphone (of computer)) .
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) De beelden van een smartphone (of computer) controleren o Smartphone (Android / iPhone) OPMERKING : Voor deze functie wordt gebruikt, moet er een smartphone-applicatie geïnstalleerd worden op de smartphone. ”Installatie van smartphone-applicaties” (A pag. 160) . 0 Wanneer iFrame geselecteerd is voor ”VIDEO-OPN-FORMAT”, verschijnt het volgende scherm, en wordt de opnamestand gewijzigd in de 50i-stand in AVCHD. 1 Start ”Everio sync.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Beeldbewaking via een toegangspunt thuis (BINNENMONITORING) . Verbind de camera en een smartphone (of computer) thuis draadloos via het toegangspunt met de router van het draadloze LAN. Via een smartphone (of computer) die in verbinding is, kunt u de beelden controleren die worden vastgelegd door de camera. 0 Tijdens het bewaken kunnen video´s en stilstaande beelden opgenomen worden. . LET OP : Bediening via een smartphone ”Smartphone-applicaties gebruiken” (A pag.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Bedieningswijze . . Verbind de camera met het toegangspunt (draadloze LANrouter) Verbind de camera met het toegangspunt aan de hand van een van de volgende methodes. 6 Tik op ”TOEV.”. (Gebruik op deze camera) 7 Tik op ”WPS EENVOUDIGE REG.”. (Gebruik op deze camera) 8 Activeer binnen twee minuten WPS op het toegangspunt (de draadloze LAN-router).
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Tik de naam (SSID) van het gewenste toegangspunt aan in de lijst met zoekresultaten. (Gebruik op deze camera) 9 Registreer een wachtwoord. (Gebruik op deze camera) . 8 Tik op 1 onderaan rechts op het scherm. (Gebruik op deze camera) . . 3 Tik op ”NORMALE Wi-Fi-INST.”. (Gebruik op deze camera) . 4 0 . 0 0 0 5 0 0 Tik op ”TOEGANGSPUNTEN”. (Gebruik op deze camera) Tik op de toetsen op het aanraakscherm om de tekens in te voeren.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 0 0 0 Verbind de smartphone (of computer) thuis met het toegangspunt (draadloze LAN-router). Voor meer informatie over verbindingen, raadpleeg de instructiehandleidingen van het gebruikte apparaat of de draadloze LANrouter. Deze instelling is niet noodzakelijk als de smartphone (of computer) thuis al verbonden is met het toegangspunt (draadloze LAN-router). . .
. . Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 3 0 Bediening via een smartphone ”Smartphone-applicaties gebruiken” (A pag. 160) Meld u aan met uw gebruikersnaam en wachtwoord. (indien geen verificatie kan worden verkregen) o Controle via de computer (Windows7) Tik op de URL-toets die wordt weergegeven op het scherm van de camera. (deze toets wordt weergegeven wanneer de computer en de camera draadloos zijn verbonden.) . 1 0 Controleer de URL die wordt weergegeven op het scherm van de camera.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) De gebruikersnaam is ”everio” en het standaard wachtwoord is ”0000”. ”Instellingen wijzigen” (A pag. 139) 0 U kunt het camerabeeld controleren met een smartphone (of computer), via een internetaansluiting. * Voor het gebruik van deze functie is een voorbereiding noodzakelijk voor een draadloze LAN-router die compatibel is met UPnP (Universal Plug and Play), en een internetverbinding via de welke het globale IP-adres kan worden verkregen.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Bedieningswijze o Gebruik op deze camera OPMERKING : Voor deze functie wordt gebruikt, moet er een smartphone-applicatie geïnstalleerd worden op de smartphone. ”Installatie van smartphone-applicaties” (A pag. 160) 0 Tik op ”MENU”. (Gebruik op deze camera) . 1 0 0 Controleer de URL (WAN). . 7 De URL (WAN) van de smartphone waarmee de verbinding wordt gemaakt verschijnt. (Verschijnt niet als de DDNS niet of niet juist is ingesteld.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Meld u aan met uw gebruikersnaam en wachtwoord. (indien geen verificatie kan worden verkregen) . 3 2 Meld u aan met uw gebruikersnaam en wachtwoord. De gebruikersnaam is ”everio” en het standaard wachtwoord is ”0000”. ”Instellingen wijzigen” (A pag. 139) 0 Bedieningen via de webbrowser ”De Wi-Fi-functie via een webbrowser gebruiken” (A pag.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Stilstaande beelden via e-mail versturen na gezichtsdetectie of beweging (DETECTEREN/MAIL) . Als gezichten of bewegingen worden waargenomen door de camera, wordt automatisch een stilstaand beeld opgenomen en via e-mail verstuurd. Tik op ”DETECTEREN/MAIL” (P). 4 Tik op ”DETECTEREN/ATT. MAIL”. 5 Kies ”DETECTEREN/ATT. MAIL” en tik vervolgens op J. . 3 OPMERKING : De grootte van de stilstaande beelden die zijn opgenomen met DETECTEREN/MAIL is 640 x 360.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) . 0 0 Bezig met DETECTEREN/MAIL gezichtsdetectie (na voltooiing van de gezichtsdetectie wordt automatisch een e-mail verzonden) . 9 De detectie wordt gedurende de eerste 5 seconden uitgesteld. 0 0 0 Bij detectie verschijnt het pictogram ”PHOTO” gedurende ongeveer 2 seconden op het scherm. De beelden worden automatisch vastgelegd als er bewegende onderwerpen of gezichten op het scherm van de camera verschijnen.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Video´s opnemen en via e-mail versturen (VIDEOMAIL) . U kunt video´s van maximaal 15 seconden opnemen en via e-mail versturen. Met deze functie kunnen eenvoudig, zelfs dagelijks, korte video´s worden verstuurd, zals het opgroeien van kleine kinderen naar grootouders op grote afstand. Tik op ”VIDEOMAIL” (L). 4 Tik op ”VIDEOMAILADRES”. 5 Kies ”VIDEOMAILADRES” en tik vervolgens op J. .
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Beeldbewaking op TV (TV-MONITORING) . U kunt dit toestel draadloos verbinden met een DLNA-compatibele TV voor het afspelen van stilstaande beelden dit toestel op het TV-scherm. (Deze functie is mogelijk niet beschikbaar, afhankelijk van het gebruikte DLNAapparaat.) Thuis verbinden via toegangspunt (draadloze LAN-router). 0 9 U kunt de opname 15 seconden laten duren of op de knop START/ STOP drukken om de opname te onderbreken. Tik op ”VERZENDEN”.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 5 Start met het maken van een verbinding. (Gebruik op deze camera) 0 Tik op ”ANNULEREN” om opnieuw vanaf stap 1 te beginnen als de DLNAcompatibele TV die wordt gebruikt Everio niet kan detecteren. LET OP : 0 0 0 . 0 Bezig met verbinding maken 7 Wacht nadat de verbinding is voltooid tot het DLNA-toestel opstart. (Gebruik op deze camera) . . 6 Deze functie is niet bedoeld voor noodgevallen of het voorkomen van misdaden.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) GEMAKKELIJKE OPSLAG U kunt de video’s en stilstaande beelden opslaan op uw computer door het uitvoeren van eenvoudige stappen. Maak een draadloze verbinding met de computer via een toegangspunt thuis (draadloze LAN-router). Wat heeft u nodig Computer (installeer LoiLoFit for Everio op uw computer) ”De meegeleverde software installeren” (A pag.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Opname van de plaatsinformatie . U kunt via een directe aansluiting (Wi-Fi Direct) met een smartphone de plaatsinformatie van de locatie waar de opname plaatsvindt opnemen. Tik op ”STARTEN” (I). (Gebruik op deze camera) . 4 OPMERKING : Om de plaatsinformatie te verkrijgen, is het nodig de smartphone met de camera te verbinden en de smartphone-applicatie te starten. Bovendien is de instelling van de ”LOK INFO TRANS INT” noodzakelijk voor de smartphone-applicatie.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Tik op ”WPS”. (Gebruik op deze camera) 6 Activeer binnen twee minuten WPS op de smartphone (of de computer). (Gebruik op de smartphone (of computer)) . 5 1 Tik op ”MENU”. (Gebruik op deze camera) . o Verbinding door Wi-Fi Protected Setup (WPS) Zet de camera in de opnamestand. 0 Er wordt een verbinding gemaakt en Q verschijnt op het camerascherm. . 7 Zie de handleiding van het gebruikte apparaat om WPS te activeren. 0 Tik op het pictogram ”Wi-Fi” (Q).
. Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 0 Druk op de knop ”START/STOP” om een normale opname te starten. OPMERKING : Er kan geen handmatige opname uitgevoerd worden. Het is niet mogelijk om over te schakelen naar de afspeelstand. . 0 0 Het monitorscherm wordt weergegeven. . 4 Tik op Q om het tijdsinterval te wijzigen voor het verkrijgen van de GPS-plaatsinformatie (UIT-15 sec.). ”Instellingen van Smartphone-applicatie” (A pag. 171) 0 De plaatsinformatie ontvangen (Weergave op deze camera) .
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Gebruik van de steun voor panoramisch filmen (apart verkrijgbaar) Het panoramisch filmen (de camera horizontaal naar links/rechts verplaatsen) kan bediend worden via een smartphone als de camera op de steun voor panoramisch filmen wordt geplaatst. Wijzig op voorhand de instelling van ”AV-TERMINAL” voor het gebruik van een steun voor panoramisch filmen. Wijzig de instelling via het menuscherm van de camera. o De camera op de steun voor panoramisch filmen plaatsen.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) o Bediening via de smartphone-applicatie 0 Verbind de camera en de smartphone via DIRECTE MONITORING of BINNENMONITORING/BUITENMONITORING. ”Beeldbewaking via directe aansluiting (DIRECTE MONITORING)” (A pag. 116) ”Beeldbewaking via een toegangspunt thuis (BINNENMONITORING)” (A pag. 119) ”Beeldbewaking via het internet (BUITENMONITORING)” (A pag. 124) Start ”Everio sync. 2”. .
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Instellingen wijzigen Voor het gebruik van de Wi-Fi-functie is het misschien nodig om bepaalde instellingen op de camera en de smartphone (of computer) uit te voeren. 0 Registratie van de toegangspunten waarmee verbinding gelegd kan worden (draadloze LAN-router) ”Registreren van de toegangspunten van de camera die moet worden verbonden (TOEGANGSPUNTEN)” (A pag. 150) Verkrijgen van een dynamische DNS-account ”Een dynamische DNS-account (DDNS) verkrijgen” (A pag.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Menu-instellingen Instelling DIRECTE MONITORING Nadere bijzonderheden Configureert verschillende instellingen gerelateerd aan DIRECTE MONITORING. 0 WACHTWOORD Stelt het wachtwoord voor toegang tot de camera in. ”Het wachtwoord instellen (DIRECTE MONITORING/BINNENMONITORING/BUITENMONITORING)” (A pag. 141) OPGELEGDE GROEPSEIG. (Standaard: ”AAN”) Instellen of de groepsvergunningen van de eigenaar wel of niet worden opgehaald.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Instelling VIDEOMAIL Nadere bijzonderheden VIDEOMAIL- ADRES Voer het e-mailadres van de ontvanger van video-mails in. ”Stilstaande beelden via e-mail versturen na gezichtsdetectie of beweging (DETECTEREN/MAIL)” (A pag. 127) 0 MAILINSTELLING Registreert de e-mailadressen van de afzender en ontvanger. ”Het e-mailadres van de afzender van de camera instellen” (A pag. 145) ”Registreren van het e-mailadres van de ontvanger van de camera” (A pag.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 0 0 0 Het wachtwoord instellen (DIRECTE MONITORING/ BINNENMONITORING/BUITENMONITORING) Stelt het wachtwoord vereist voor toegang tot de camera in. Maximaal 8 tekens (alleen letter van het alfabet, getallen en symbolen), karaktergevoelig. 0 Tik op ”MENU”. (Gebruik op deze camera) 6 Tik op ”INSTEL”. (Gebruik op deze camera) 0 De instellingen worden niet opgeslagen totdat ”INSTEL” wordt aangetikt. . 1 0 Tik op ”WISSEN” om een teken te wissen.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Bekrachtigde groepseigenaar instellen (DIRECTE MONITORING) De HTTP-poort wijzigen (DIRECTE MONITORING/ BINNENMONITORING/BUITENMONITORING) Stelt in of er om verificatie van de groepseigenaar gevraagd wordt. Wijzigt het poortnummer voor toegang tot de camera. Geldig wanneer meerdere camera’s worden geïnstalleerd voor bewaking buiten. Tik op ”MENU”. (Gebruik op deze camera) 1 Tik op ”MENU”. (Gebruik op deze camera) . 1 Tik op het pictogram ”Wi-Fi” (Q).
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) De UPnP van deze camera instellen (BUITENMONITORING) Een dynamische DNS-account (DDNS) verkrijgen Stelt het UPnP van de camera in. Met een dynamische DNS-account kan dit toestel zoals gewoonlijk gebruikt worden op het internet, zelfs als het IP-adres wijzigt wanneer toegang wordt verkregen tot dit toestel via het internet. 0 Alleen de dynamische DNS-service van JVC kan op deze camera worden ingesteld.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Dynamische DNS op deze camera instellen (BUITENMONITORING) 6 Voer de DDNS-instellingen in (gebruikersnaam/wachtwoord). (Gebruik op deze camera) Stelt de dynamische DNS-informatie in van de verkregen account op de camera. ”Een dynamische DNS-account (DDNS) verkrijgen” (A pag. 143) Tik op ”MENU”. (Gebruik op deze camera) . 1 0 . 0 0 0 0 2 Het bovenste menu verschijnt. Tik op het pictogram ”Wi-Fi” (Q).
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Het e-mailadres van de afzender van de camera instellen 6 Tik op ”E-MAIL VERZENDER”. (Gebruik op deze camera) 7 Tik op ”VOLGENDE”. (Gebruik op deze camera) Stelt het adres in dat gebruikt wordt voor het versturen van e-mails op de camera. OPMERKING : 0 Tik op ”MENU”. (Gebruik op deze camera) . . 1 Als u een Gmail-adres gebruikt als mailadres van de verzender, kunnen sommige instellingen worden weggelaten.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 0 0 0 0 Voer de gebruikersnaam in en tik op ”INSTEL”. 0 Tik op de toetsen op het aanraakscherm om de tekens in te voeren. Het teken wijzigt bij elke tik. Tik op ”WISSEN” om een teken te wissen. Tik op ”ANNULEREN” om af te sluiten. Tik op”A/a/1” om het tekentype te selecteren (hoofdletter, kleine letter en getal). Tik op E of F om één spatie naar links of rechts te gaan. Tik na de instelling op ”INSTEL”. Tik op ”WIJZIGEN” om de SMTP-poort te wijzigen.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) AUTHENT. METHODE Stel dit in als de verificatiemethode gewijzigd moet worden. GEBRUIKERSNAAM Voer de gebruikersnaam in. WACHTWOORD Registreren van het e-mailadres van de ontvanger van de camera Registreert de e-mailadressen van de ontvangers op de camera. 1 Voer het wachtwoord in. Tik op ”MENU”. (Gebruik op deze camera) LET OP : . 0 Het bovenste menu verschijnt. Tik op het pictogram ”Wi-Fi” (Q).
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) . *Opmerking Verstuur niet meer e-mails met dezelfde instellingen als u foutmeldingen ontvangt. Sommige providers kunnen u aanmerken als afzender van spam (ongewenste mail). Tik op ”TOEV.”. (Gebruik op deze camera) 8 Voer het e-mailadres van de ontvanger in. . . 7 0 0 0 0 0 0 Tik nadat u, afhankelijk van de functie die wordt gebruikt, op ”DETECTEREN/MAIL” of ”VIDEOMAIL” hebt getikt, op ”INSTEL”. .
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) De detectiemethode van deze camera instellen (INST. DETECT./MAIL) De detectie-interval van deze camera instellen (INST. DETECT./MAIL) Stelt de detectiemethode in om de opname te starten. Stelt de tussenperiode in waarna detectie weer ingeschakeld wordt, na de vorige detectie. Tik op ”MENU”. (Gebruik op deze camera) 1 Tik op ”MENU”. (Gebruik op deze camera) . 1 Het bovenste menu verschijnt. Tik op het pictogram ”Wi-Fi” (Q).
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Zelfopname op deze camera instellen (INST. DETECT./MAIL) Stelt in of tijdens detectie video´s opgenomen moeten worden op deze camera. Tik op ”MENU”. (Gebruik op deze camera) Er zijn 4 manieren om toegangspunten te registreren (draadloze LAN-router) voor een verbinding. Wi-Fi Protected Setup (WPS) registratie Dit is de eenvoudigste registratiemetode.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) o Zoeken en registreren Tik op ”MENU”. (Gebruik op deze camera) . 1 Tik op ”TOEGANGSPUNTEN”. (Gebruik op deze camera) . 5 0 Het bovenste menu verschijnt. Tik op het pictogram ”Wi-Fi” (Q). (Gebruik op deze camera) 3 Tik op 1 onderaan rechts op het scherm. (Gebruik op deze camera) 4 Tik op ”NORMALE Wi-Fi-INST.”. (Gebruik op deze camera) 5 Tik op ”TOEGANGSPUNTEN”. (Gebruik op deze camera) 6 Tik op ”TOEV.”. (Gebruik op deze camera) . 2 Tik op ”TOEV.”.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Tik op ”ZOEKEN”. (Gebruik op deze camera) o Handmatige registratie 1 Tik op ”MENU”. (Gebruik op deze camera) . 7 Tik de naam (SSID) van het gewenste toegangspunt aan in de lijst met zoekresultaten. (Gebruik op deze camera) 0 Het bovenste menu verschijnt. 2 Tik op het pictogram ”Wi-Fi” (Q). (Gebruik op deze camera) 3 Tik op 1 onderaan rechts op het scherm. (Gebruik op deze camera) 4 Tik op ”NORMALE Wi-Fi-INST.”.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Tik op ”HANDMATIG”. (Gebruik op deze camera) 8 Voer de naam (SSID) van het toegangspunt (draadloze LAN-router) in en tik ”INSTEL” aan. (Gebruik op deze camera) . . . 7 0 0 0 0 0 Kies het type verificatiemethode (veiligheid). (Gebruik op deze camera) . 9 Tik op de toetsen op het aanraakscherm om de tekens in te voeren. Het teken wijzigt bij elke tik.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) o WPS PIN-registratie 7 Tik op ”MENU”. (Gebruik op deze camera) Tik op ”WPS PIN”. (Gebruik op deze camera) . 1 0 . 0 2 Het bovenste menu verschijnt. 8 Tik op het pictogram ”Wi-Fi” (Q). (Gebruik op deze camera) Voer de PIN-code in op het toegangspunt (draadloze LAN-router) welke wordt weergegeven op de camera. 0 Zie de handleiding van het gebruikte apparaat voor informatie over het invoeren van een PIN-code. Tik op ”START”. (Gebruik op deze camera) .
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Het bewerken van LAN-instellingen van toegangspunten (draadloze LAN-router) Breng de overeenkomstige wijzigingen aan, bijvoorbeeld als u het IP-adres voor de camera wilt vastleggen voor de camera. Tik op ”MENU”. (Gebruik op deze camera) . 1 0 0 Voer de LAN-instellingen uit. (als ”DHCP” is ingesteld op ”UIT”) (Gebruik op deze camera) . 7 Tik op ”GEBRUIKEN” om het geselecteerde toegangspunt te gebruiken. Tik op ”WISSEN” om het geregistreerde toegangspunt te wissen.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Het filter van het MAC-adres inschakelen (TV-MONITORING) Registreren van het MAC-adres (TV-MONITORING) Als ”MAC-ADRESFILTER” wordt ingeschakeld, kan Everio doorzocht worden op het apparaat (TV-scherm); het MAC-adres van het apparaat moet vooraf geregistreerd zijn op Everio. Registreer het MAC-adres van het TV-scherm op Everio. Tik op ”MENU”. (Gebruik op deze camera) Tik op ”MENU”. (Gebruik op deze camera) . 1 1 . 0 0 2 Tik op het pictogram ”Wi-Fi” (Q).
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Het MAC-adres van deze camera controleren De netwerkinstellingen met een wachtwoord beschermen Toont het MAC-adres van de camera. Stelt een wachtwoord in voor het vergrendelen en beschermen van de netwerkinstellingen. Tik op ”MENU”. (Gebruik op deze camera) 1 Tik op ”MENU”. (Gebruik op deze camera) . 1 Het bovenste menu verschijnt. Tik op het pictogram ”Wi-Fi” (Q). (Gebruik op deze camera) 3 Tik op 1 onderaan rechts op het scherm.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) De Wi-Fi-instellingen initialiseren Zet alle WiFi-instellingen terug naar de standaardwaarden. Tik op ”MENU”. (Gebruik op deze camera) . 1 . Voer de getallen van 4 telens in. Tik op ”WISSEN” om een teken te wissen. Tik op ”ANNULEREN” om af te sluiten. Tik op E of F om één spatie naar links of rechts te gaan. Tik na de instelling op ”INSTEL”. 0 Het bovenste menu verschijnt. 2 Tik op het pictogram ”Wi-Fi” (Q).
. Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 0 0 Tik op ”NEE” om te annuleren. Als ”JA” wordt aangetikt, keren de netwerkinstellingen terug naar de standaardwaarden. De snelheid van het panoramisch filmen wijzigen Wijzig de werkingssnelheid van de steun voor panoramisch filmen (apart verkrijgbaar) via de smartphone. Selecteer een van de 2: ”HOGE SNELHEID” of ”LAGE SNELHEID”. 0 Raadpleeg het volgende onderdeel voor meer informatie over het gebruik van een steun voor panoramisch filmen.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Smartphone-applicaties gebruiken 0 0 Als de smartphone-software ”Everio sync. 2” geïnstalleerd wordt, kunnen de beelden op de camera vanop afstand gecontroleerd worden, en kunnen de opname van video’s/stilstaande beelden en het gebruik van de zoom worden toegepast. U kunt beelden die zijn opgenomen met de camera ook via Wi-Fi verzenden naar de smartphone, om op uw smartphone of tablet te genieten van de opgenomen beelden.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) o Indexscherm (AVCHD Video/iFrame Video/Stilstaand . beeld) . o Scherm Overzetten Tik op het markeringspictogram (D) in de scène die u wilt markeren. . 2 . o Scherm Score van spel . 0 LET OP : 0 ”Everio sync. 2” voor iPhone/iPad kan niet worden gebruikt wanneer de iPhone/iPad is aangesloten op het netwerk van de mobiele telefoon. Sluit deze om gebruik te maken van deze functie aan op de camera of een toegansgpunt via Wi-Fi.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Gebruik van de score van het spel De scores van verschillende sportwedstrijden kan worden opgenomen met videobeelden. De opgenomen positie kan ook gemarkeerd worden, om de scènes die u nadien wilt bekijken gemakkelijk terug te vinden. o Gebruikelijk voor Android en iOS Tik op ”Game Score”. . 1 0 Tik op ”LIJST VAN TEAM” om de teamnaam en -kleur te wijzigen en om een team toe te voegen. Selecteer het team, en tik vervolgens op ”OK”.
. . Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 6 0 0 0 0 Tik op ”Game Start” wanneer het spel gestart is. Markeer de favoriete scènes. . 8 Tik op de toets met het nummer van het gescoorde team. Tik op de scorekaart om de score te wijzigen. Tik op de toets ”Undo” om de laatst ingevoerde score te annuleren. Wanneer de score geregistreerd is, kan de volgende score niet ingevoerd worden tijdens de volgende 5 seconden. Tik op het nummer wanneer de score wordt toegevoegd. .
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Overzetten van video’s (AVCHD-formaat) Video’s opgenomen in AVCHD-formaat overzetten naar de smartphone. 0 De video die moet worden doorgestuurd wordt geconverteerd naar het volgende formaat. Onderdeel Nadere bijzonderheden Systeem MP4 Video Codec H.
. Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Het aantal van de geselecteerde beeldbestanden wordt aangegeven naast het vinkje linksonder. 0 Zie de onderstaande instructies voor het instellen van de lengte van de video’s die u overzet. ”Instellingen van Smartphone-applicatie” (A pag. 171) . 0 4 Tik op het indexscherm op de beelden die u wenst over te zetten. Tik op ”OVERDRACHT”. . 6 5 Controleer of het tabblad ”AVCHD” is aangegeven op de onderste helft van het scherm.
. Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 0 0 . 0 0 Tik nadat het overzetten voltooid is op ”OK”. . 8 Tik op ”ANNULEREN” om de functie te annuleren. 0 0 Tik op ”CONTR.” om de video af te spelen en te controleren. (alleen Android) Tik op ”DEEL” om de video te uploaden. (alleen Android) Tik op de gewenste service en ga vervolgens door naar het uploadproces. Om gebruik te maken van een service, moet eerst een registratie worden uitgevoerd.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Overzetten van video’s (iFrame-formaat) Video’s opgenomen in iFrame-formaat overzetten naar de smartphone. (Afhankelijk van de smartphone die wordt gebruikt, worden video’s mogelijk niet afgespeeld.) 0 Overgezette video’s worden verzonden in de originele bestandsindeling. Start ”Everio sync. 2” op de smartphone. . 1 0 Selecteer het type verbinding met de camera. . 2 Start de applicatie na gecontroleerd te hebben of de smartphone verbonden is met deze camera.
. . Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 0 0 0 8 Tik op ”ANNULEREN” om de functie te annuleren. Tik nadat het overzetten voltooid is op ”OK”. Tik op ”OVERDRACHT”. . 6 Tik op ”Monitor” om terug te keren naar het monitorscherm. Tik op Q om naar het scherm instellingen te gaan. . 0 0 7 Tik op ”ANNULEREN” om de functie te annuleren. ”OVERDRACHT” start. 168 0 Tik op ”CONTR.” om de video af te spelen en te controleren. (alleen Android) Tik op ”DEEL” om de video te uploaden.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Stilstaande beelden overzetten U kunt opgenomen stilstaande beelden naar uw smartphone overzetten. Als het opnameformaat van het originele stilstaande beeld 4:3 is, wordt het beeld bij het overzetten met 1600X1200 verkleind. Als het opnameformaat van het originele stilstaande beeld 16:9 is, wordt het beeld bij het overzetten met 1920X1080 verkleind. Start ”Everio sync. 2” op de smartphone. . 1 0 Selecteer het type verbinding met de camera. .
. Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 0 0 Tik op ”OVERDRACHT”. . 6 Tik op ”Monitor” om terug te keren naar het monitorscherm. Tik op Q om naar het scherm instellingen te gaan. 0 Tik nadat het overzetten voltooid is op ”OK”. . 8 Tik op ”ANNULEREN” om de functie te annuleren. 7 Tik op ”ANNULEREN” om de functie te annuleren. ”OVERDRACHT” start. . 0 0 0 170 Tik op ”CONTR.” om het stilstaande beeld af te spelen en te controleren.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Instellingen van Smartphone-applicatie U kunt de instellingen van de smartphone-applicatie wijzigen. o Gebruikelijk voor Android en iOS Schakelt de bewakingsfunctie van het scherm in/uit. (Breng een vinkje aan om deze in te stellen op ”ON”) WERKINGSSNELHEID PAN Selecteer de snelheid van het panoramisch filmen van de (optionele) steun voor panoramisch filmen uit hoge snelheid/lage snelheid.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Instellingen van score van spel 3 Tik op de gewenste instelling. Voer de opnamemethodes van de spelscore en de teaminformatie in. o Gebruikelijk voor Android en iOS Tik op Q. . 1 . Onderdeel LIJST VAN TEAM Stel de teamnaam en -kleur in. Tik op A”LIJST VAN TEAM” voor de weergave van ”HOME” en ”VISITOR”. B”NAAM VAN TEAM” en ”KLEUR VAN TEAM” kunnen worden ingesteld door op elke toets te tikken.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) De Wi-Fi-functie via een webbrowser gebruiken U kunt via de webbrowser van een computer een verbinding maken met de camera en gebruik maken van de Wi-Fi-functie. 0 Aanwijzingen op het scherm. ”Aanwijzingen op het scherm” (A pag. 173) Aanwijzingen op het scherm . o Opnamescherm OPMERKING : 0 De knop volledig scherm wordt niet weergegeven wanneer het videostream formaat MotionJPEG is.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) . o Indexscherm video (miniatuurweergave) (AVCHD) . o Indexscherm video (miniatuurweergave) (iFrame) 0 Klik op het miniatuur om een video te downloaden. . o Indexscherm stilstaand beeld (miniatuurweergave) 0 Klik op het miniatuur om een stilstaand beeld te downloaden.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) o Scherm INST. DETECT./MAIL . Instellingen van e-mails met berichtgevingen zoals de detectiemethode en het e-mailadres van de ontvanger kunnen zelfs ingesteld worden als de camera niet binnen het bereik is.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Oplossen van problemen Directe bewaking Probleem Actie Ik kan geen verbinding met de camera maken. (URL vereist) 0 0 0 0 Controleer of de Wi-Fi-verbinding op geslaagde wijze tot stand is gebracht. Controleer of Wi-Fi is aangesloten op ”DIRECT-**EVERIO”. Controleer of de smartphone (of computer) is aangesloten op de camera. Probeer opnieuw na het uitschakelen en terug inschakelen van de camera en de terminal (smartphone of computer).
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) - Controleer of er een kleeflabel met de oorspronkelijke instellingen is bevestigd op de behuizing van het toegangspunt (draadloze LAN-router). - Zoek de standaardinstellingen in de handleiding van het toegangspunt (draadloze LAN-router). Het is niet duidelijk wat het wachtwoord van het toegangspunt (draadloze LAN-router) is. Kijk in de handleiding van het gebruikte toegangspunt (draadloze LAN-router). Ik kan geen verbinding aanmaken via Wi-Fi Protected Setup (WPS).
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) BUITENMONITORING (verbinding via het Internet) Probleem Actie Het is niet duidelijk welke URL ingevoerd moet worden in de webbrowser. 0 De URL (WAN) verschijnt niet in de netwerkinformatie. De URL (WAN) verschijnt niet indien dynamische DNS niet is ingesteld op de camera. Voer de volgende stappen uit om dynamische DNS in te stellen. 1. Zorg dat u een account krijgt via uw computer bij JVC dynamic DNS service. 2.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) 0 Kan geen verbinding aanmaken, hoewel ”LUPnP” wordt weergegeven. Als het pictogram na het inschakelen van de UPnP-functie nog steeds niet verdwijnt, schakel dan zowel de draadloze LAN-router die wordt gebruikt als de camera uit en terug in, en probeer opnieuw. Als ”UPnP” is ingesteld op ”UIT”, verschijnt ”LUPnP” niet. Stel in dergelijke gevallen ”UPnP” in op ”AAN” .
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Wi-Fi specificaties Wi-Fi specificaties Onderdeel Nadere bijzonderheden Draadloze LAN standaard IEEE802.11b/g/n (2,4GHz frequentieband) Wi-Fi-beveiliging Codering: WEP, WPA, WPA2 *WPA en WPA2 worden alleen ondersteund door de persoonlijke modus (PSK). DIRECTE MONITORING / BINNENMONITORING / BUITENMONITORING o Bij gebruik van Everio sync. 2 Onderdeel Nadere bijzonderheden Ondersteunde terminals iPhone/iPad/iPod touch: iOS 5.
Gebruik van Wi-Fi (GZ-EX515/GZ-EX510) Audio AAC 48kHz 16 bits 2k Tijd Max.
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) DIRECTE MONITORING U kunt beelden die worden vastgelegd door Everio bewaken op uw smartphone of pc. Terwijl u druk bezig bent kunt u uw baby in het oog houden die slaapt in de kamer erlangs. BINNENMONITORING De beelden die worden vastgelegd door Everio kunnen via de draadloze LAN-router worden ingesteld op uw pc of smartphone wanneer uw kinderen thuiskomen.
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) DIRECTE MONITORING o Instelling (Begin zodra de instelling is gebeurd vanaf de ”Gewone werking” hieronder) Creëer een QR-code. o Voer in de vereiste onderdelen voor directe bewaking 0 0 Wachtwoord: stel een wachtwoord in om deze camera te verbinden met het apparaat door directe bewaking.
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) o Gewone werking De smartphone draadloos met de camera verbinden o Verbinding door invoeren van het Wi-Fi-wachtwoord 1 Tik op ”MENU”. (Gebruik op deze camera) . Zet de camera in de opnamestand. Selecteer de SSID in stap 5 van het scherm voor de selectie van het WiFi-netwerk van uw smartphone, en voer de PASS in op het wachtwoordscherm. (Gebruik op de smartphone (of computer)) . 6 0 Het bovenste menu verschijnt.
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) 4 Tik op ”STARTEN” (I). (Gebruik op deze camera) De beelden van een smartphone (of computer) controleren o Smartphone (Android / iPhone) OPMERKING : Voor deze functie wordt gebruikt, moet er een smartphone-applicatie geïnstalleerd worden op de smartphone. ”Installatie van smartphone-applicaties” (A pag. 160) 0 Start ”Everio sync. 2” op de smartphone nadat DIRECTE MONITORING is ingesteld. 2 Tik op ”DIRECTE MONITORING”.
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) Voer de bediening uit via een smartphone . 4 0 Bediening via een smartphone ”Smartphone-applicaties gebruiken” (A pag. 160) o Computer (Windows 7) Tik op de URL-toets die wordt weergegeven op het scherm van de camera. (deze toets wordt weergegeven wanneer de computer en de camera draadloos zijn verbonden.) . 1 0 Controleer de URL die wordt weergegeven op het scherm van de camera. Deze begint vanaf ”http://”. .
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) BINNENMONITORING o Instelling (Begin zodra de instelling is gebeurd vanaf de ”Gewone werking” hieronder) Creëer een QR-code. o Voer in de vereiste onderdelen voor bewaking binnen 0 Wachtwoord: stel een wachtwoord in om deze camera te verbinden met het apparaat via een toegangspunt. (Niet meer dan 8 tekens) HTTP-poort: Normaal ingesteld op ”80”. . waarden in. 0 6 Tik op ”UITVOEREN”. Geef het scherm voor het lezen van de QR-code weer.
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) 0 2 Het bovenste menu verschijnt. 8 Tik op het pictogram ”Wi-Fi” (Q). (Gebruik op deze camera) Activeer binnen twee minuten WPS op het toegangspunt (de draadloze LAN-router). 0 Als de registratie voltooid is, tikt u ”OK” op het scherm van de camera aan. (Gebruik op deze camera) . 9 Zie de handleiding van het gebruikte apparaat om WPS te activeren. Tik op 1 onderaan rechts op het scherm. (Gebruik op deze camera) .
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) 0 0 0 . 0 0 Tik op ”TOEGANGSPUNTEN”. (Gebruik op deze camera) 10 Als de registratie voltooid is, tikt u ”OK” op het scherm van de camera aan. (Gebruik op deze camera) 6 Tik op ”TOEV.”. (Gebruik op deze camera) . . 5 Bijvoorbeeld voor ”ABC” voert u ”A” in door eenmaal te tikken, ”B” door tweemaal te tikken of ”C” door 3 maal te tikken. Tik op ”WISSEN” om een teken te wissen. Tik op ”ANNULEREN” om af te sluiten.
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) Tik op ”BINNENMONITORING”. 3 Het opnamescherm wordt weergegeven. . 2 Tik op ”STARTEN” (I). (Gebruik op deze camera) 5 Start met het maken van een verbinding. (Gebruik op deze camera) . . . 4 0 Het volgende wordt weergegeven wanneer de camera verbonden is met het toegangspunt. . 6 De naam (SSID) van het toegangspunt (draadloze LAN-router) in de verbinding wordt weergegeven.
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) 2 Controleer de URL die wordt weergegeven op het scherm van de camera. Deze begint vanaf ”http://”. BUITENMONITORING o Instelling (Begin zodra de instelling is gebeurd vanaf de ”Gewone werking” hieronder) . Verkrijgen van een dynamische DNS-account 0 Start Internet Explorer (webbrowser) op de computer en voer de URL in. 1 4 Meld u aan met uw gebruikersnaam en wachtwoord.
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) 0 2 Tik op ”JA”. 3 Tik op ”OK”. Tik op het pictogram ”Wi-Fi” (Q). (Gebruik op deze camera) . . 2 Het bovenste menu verschijnt. Tik op 1 onderaan rechts op het scherm. (Gebruik op deze camera) . 3 0 0 . 4 Tik op ”NORMALE Wi-Fi-INST.”. (Gebruik op deze camera) Tik op ”VOLGENDE” om terug te keren naar het scherm voor het lezen van de QR-code. Ingestelde inhoud wordt opgeslagen.
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) o Zoek het toegangspunt, en selecteer het in de lijst. Stel de naam (SSID) van het toegangspunt (draadloze LAN-router) en het wachtwoord vooraf in. Tik op ”MENU”. (Gebruik op deze camera) . 1 Tik op ”NORMALE Wi-Fi-INST.”. (Gebruik op deze camera) . 4 0 Het bovenste menu verschijnt. Tik op het pictogram ”Wi-Fi” (Q). (Gebruik op deze camera) 3 Tik op 1 onderaan rechts op het scherm.
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) ”Registreren van de toegangspunten van de camera die moet worden verbonden (TOEGANGSPUNTEN)” (A pag. 150) o Gewone werking Verbind deze camera met een smartphone (of computer). Tik op ”MENU”. (Gebruik op deze camera) . 1 Tik op ”ZOEKEN”. (Gebruik op deze camera) . 7 0 2 Tik op het pictogram ”Wi-Fi” (Q). (Gebruik op deze camera) 3 Tik op ”BUITENMONITORING” (M). (Gebruik op deze camera) 4 Tik op ”STARTEN” (I).
. Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) 0 0 Controleer de URL (WAN). . . 7 De URL (WAN) van de smartphone waarmee de verbinding wordt gemaakt verschijnt. (Verschijnt niet als de DDNS niet of niet juist is ingesteld.) ”LUPnP” wordt weergegeven wanneer UPnP niet kan worden gebruikt. 0 0 Tik na controle van de URL op ”AFSL.” om terug te keren naar het vorige scherm. ”LUPnP” wordt weergegeven wanneer UPnP niet kan worden gebruikt.
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) DETECTEREN/MAIL o Instelling (Begin zodra de instelling is gebeurd vanaf de ”Gewone werking” hieronder) Creëer een QR-code. OPMERKING : 0 Voer de bewerkingen in stap 2 en 3 uit na het maken van een QR-code, en lees de QR codes een voor een via de camera. o Voer in de vereiste onderdelen waarden in voor de instelling van het e-mailadres van de ontvanger. 0 0 0 0 E-mailadres: stel het e-mailadres van de ontvanger in.
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) Tik op 1 onderaan rechts op het scherm. (Gebruik op deze camera) 0 3 De inhoud van het scherm varieert, afhankelijk van de QR-code die gelezen wordt door dit apparaat. Tik op ”OK”. . 3 Tik op ”NORMALE Wi-Fi-INST.”. (Gebruik op deze camera) . 4 0 0 Tik op ”VOLGENDE” om terug te keren naar het scherm voor het lezen van de QR-code. Ingestelde inhoud wordt opgeslagen.
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) Tik op ”TOEGANGSPUNTEN”. (Gebruik op deze camera) 0 Het bovenste menu verschijnt. 2 Tik op het pictogram ”Wi-Fi” (Q). (Gebruik op deze camera) 3 Tik op 1 onderaan rechts op het scherm. (Gebruik op deze camera) 4 Tik op ”NORMALE Wi-Fi-INST.”. (Gebruik op deze camera) 5 Tik op ”TOEGANGSPUNTEN”. (Gebruik op deze camera) 6 Tik op ”TOEV.”. (Gebruik op deze camera) 7 Tik op ”ZOEKEN”. (Gebruik op deze camera) Tik op ”TOEV.”.
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) 0 Tik de naam (SSID) van het gewenste toegangspunt aan in de lijst met zoekresultaten. (Gebruik op deze camera) 0 Het bovenste menu verschijnt. 2 Tik op het pictogram ”Wi-Fi” (Q). 3 Tik op ”DETECTEREN/MAIL” (P). 4 Tik op ”DETECTEREN/ATT. MAIL”. 5 Kies ”DETECTEREN/ATT. MAIL” en tik vervolgens op J. . . 8 De zoekresultaten verschijnen op het scherm van de camera. Registreer een wachtwoord.
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) VIDEOMAIL o Instelling (Begin zodra de instelling is gebeurd vanaf de ”Gewone werking” hieronder) Creëer een QR-code. . OPMERKING : 8 0 DETECTEREN/MAIL standby voor gezichtsdetectie Voer de bewerkingen in stap 2 en 3 uit na het maken van een QR-code, en lees de QR codes een voor een via de camera. o Voer in de vereiste onderdelen waarden in voor de instelling van het e-mailadres van de ontvanger. 0 0 .
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) 4 0 Tik op ”NORMALE Wi-Fi-INST.”. (Gebruik op deze camera) 0 Tik op ”VOLGENDE” om terug te keren naar het scherm voor het lezen van de QR-code. Ingestelde inhoud wordt opgeslagen. Registratie van de toegangspunten (draadloze LAN-router) op dit toestel o Wi-Fi Protected Setup (WPS) registratie Tik op ”MENU”. (Gebruik op deze camera) . 1 Tik op ”INST. VAN QR-CODE”. . 5 . 0 2 Tik op het pictogram ”Wi-Fi” (Q).
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) Tik op ”TOEV.”. (Gebruik op deze camera) 7 Tik op ”WPS EENVOUDIGE REG.”. (Gebruik op deze camera) 8 Activeer binnen twee minuten WPS op het toegangspunt (de draadloze LAN-router). 3 Tik op 1 onderaan rechts op het scherm. (Gebruik op deze camera) 4 Tik op ”NORMALE Wi-Fi-INST.”. (Gebruik op deze camera) 5 Tik op ”TOEGANGSPUNTEN”. (Gebruik op deze camera) 6 Tik op ”TOEV.”. (Gebruik op deze camera) 7 Tik op ”ZOEKEN”.
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) Registreer een wachtwoord. (Gebruik op deze camera) 3 Tik op ”VIDEOMAIL” (L). 4 Tik op ”VIDEOMAILADRES”. 5 Kies ”VIDEOMAILADRES” en tik vervolgens op J. 0 0 0 0 0 0 Tik op de toetsen op het aanraakscherm om de tekens in te voeren. Het teken wijzigt bij elke tik. Bijvoorbeeld voor ”ABC” voert u ”A” in door eenmaal te tikken, ”B” door tweemaal te tikken of ”C” door 3 maal te tikken. Tik op ”WISSEN” om een teken te wissen.
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) TV-MONITORING o Instelling (Begin zodra de instelling is gebeurd vanaf de ”Gewone werking” hieronder) Creëer een QR-code. o Voer in de vereiste onderdelen voor de TV-monitor waarden in. . 0 9 U kunt de opname 15 seconden laten duren of op de knop START/ STOP drukken om de opname te onderbreken. Tik op ”VERZENDEN”. 0 0 MAC-adresfilter: stel deze optie in op ”ON” als u beelden bewaakt met een specifiek TV-toestel.
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) Tik op ”UITVOEREN”. 0 Het bovenste menu verschijnt. 2 Tik op het pictogram ”Wi-Fi” (Q). (Gebruik op deze camera) 3 Tik op 1 onderaan rechts op het scherm. (Gebruik op deze camera) 4 Tik op ”NORMALE Wi-Fi-INST.”. (Gebruik op deze camera) 5 Tik op ”TOEGANGSPUNTEN”. (Gebruik op deze camera) 6 Tik op ”TOEV.”. (Gebruik op deze camera) 7 Tik op ”WPS EENVOUDIGE REG.”. (Gebruik op deze camera) . 6 Lees een QR-code.
. . Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) 8 Activeer binnen twee minuten WPS op het toegangspunt (de draadloze LAN-router). 0 Tik op ”TOEGANGSPUNTEN”. (Gebruik op deze camera) 6 Tik op ”TOEV.”. (Gebruik op deze camera) 7 Tik op ”ZOEKEN”. (Gebruik op deze camera) Zie de handleiding van het gebruikte apparaat om WPS te activeren. Als de registratie voltooid is, tikt u ”OK” op het scherm van de camera aan. (Gebruik op deze camera) . .
0 0 0 0 0 Bijvoorbeeld voor ”ABC” voert u ”A” in door eenmaal te tikken, ”B” door tweemaal te tikken of ”C” door 3 maal te tikken. Tik op ”WISSEN” om een teken te wissen. Tik op ”ANNULEREN” om af te sluiten. Tik op ”A/a/1” om het tekentype te selecteren (hoofdletter, kleine letter en getal). Tik op E of F om één spatie naar links of rechts te gaan. Het wachtwoord is niet vereist als de draadloze LAN-router niet beveiligd is. 10 Als de registratie voltooid is, tikt u ”OK” op het scherm van de camera .
Gebruik van Wi-Fi door maken van een QR-code (GZ-EX515/GZ-EX510) OPMERKING : 0 0 Tik op ”ANNULEREN” om te beginnen vanaf stap 1 als er geen beeld wordt weergegeven tijdens de bewaking van de TV. Tik op ”ANNULEREN” om opnieuw vanaf stap 1 te beginnen als de DLNAcompatibele TV die wordt gebruikt Everio niet kan detecteren.
Menu Instellingen U kunt verschillende instellingen configureren m.b.v. het menu. *Het scherm hieronder is van een model met Wi-Fi-functies. Tik op ”MENU”. . 1 0 0 Het bovenste menu verschijnt. Het menu verschilt afhankelijk van de gebruikte stand. 2 Tik op het gewenste menu. 3 Tik op de gewenste instelling. . Er zijn twee soorten menu’s in dit toestel.
Menu Instellingen . Het menu Snelkoppelingen gebruiken U kunt verschillende instellingen van de aanbevolen functies in de opnamemodus voor video’s/stilstaande beelden configureren met behulp van het menu snelkoppelingen. *Het scherm hieronder is van een model met Wi-Fi-functies. Tik op ”MENU”. 2 Tik op het pictogram snelkoppelingen (F). . . 1 0 3 Het menu snelkoppelingen verschijnt. Tik op het gewenste menu en de gewenste instelling. .
Menu Instellingen . OPNAME INSTELIING Menu (video) SCENE SELECTEREN U kunt instellingen selecteren die geschikt zijn voor de opname-omstandigheden. ”Opnemen in overeenstemming met de scène (onderwerp)” (A pag. 34) *Wordt alleen weergegeven in de handmatige opnamestand. FOCUS De scherpstelling kan handmatig worden aangepast. ”Focus handmatig aanpassen” (A pag. 36) *Wordt alleen weergegeven in de handmatige opnamestand. HELDERHEID AANPASSEN Past de algemene helderheid van het scherm aan.
Menu Instellingen WINDFILTER Onderdrukt windruis. Instelling Nadere bijzonderheden UIT Deactiveert de functie. AAN Schakelt de functie in. AUTOM De functie automatisch inschakelen. SLUITERSTAND De instellingen voor continu opnemen kunnen worden aangepast. Instelling Nadere bijzonderheden OPNEMEN ÉÉN OPNAME Neemt één stilstaand beeld op. DOORLOPENDE OPNAMEN Neemt continu stilstaande beelden op terwijl SNAPSHOT wordt ingedrukt.
Menu Instellingen (als het video-opnameformaat AVCHD is) UXP Hiermee kunt u opnamen in de beste beeldkwaliteit maken. 0 Is alleen van toepassing op Blu-ray-disks. Video’s opgenomen in high-definition kunnen niet worden opgeslagen op DVD’s. XP Hiermee kunt u opnamen in een hoge beeldkwaliteit maken. SP Hiermee kunt u opnamen in standaard kwaliteit maken. EP Hiermee kunt u lange opnamen maken. SSW Hiermee kunt u opnamen in SD-kwaliteit maken.
Menu Instellingen Instelling Nadere bijzonderheden +2 Verhoogt het invoerniveau van de microfoon. +1 Verhoogt het invoerniveau van de microfoon een beetje. 0 Het invoerniveau van de microfoon is niet gewijzigd. -1 Verlaagt het invoerniveau van de microfoon een beetje. -2 Verlaagt het invoerniveau van de microfoon. HEADPHONE VOL. AANP. (GZ-EX515) Stelt het volumeniveau van de aangesloten hoofdtelefoons in. Tik om het volume te verhogen op + op het aanraakscherm.
Menu Instellingen . SPECIALE OPNAME Menu (video) HIGH-SPEED-OPNAME U kunt video’s opnemen in slow-motion door de opnamesnelheid te verhogen om de bewegingen te benadrukken, en de slow-motion-video vlot afspelen. Dit is een handige functie voor het bekijken van bewegingen, zoals de slingerbewegingen in het golf. ”Slow-motion (hogesnelheids-) opname” (A pag.
Menu Instellingen . OPNAME INSTELIING Menu (stilstaand beeld) SCENE SELECTEREN U kunt instellingen selecteren die geschikt zijn voor de opname-omstandigheden. ”Opnemen in overeenstemming met de scène (onderwerp)” (A pag. 34) *Wordt alleen weergegeven in de handmatige opnamestand. FOCUS De scherpstelling kan handmatig worden aangepast. ”Focus handmatig aanpassen” (A pag. 36) *Wordt alleen weergegeven in de handmatige opnamestand. HELDERHEID AANPASSEN Past de algemene helderheid van het scherm aan.
Menu Instellingen 0 De instelling kan afzonderlijk worden aangepast voor video’s. ”OPHELDEREN (Video)” (A pag. 211) SLUITERSTAND De instellingen voor continu opnemen kunnen worden aangepast. Instelling Nadere bijzonderheden OPNEMEN ÉÉN OPNAME Neemt één stilstaand beeld op. DOORLOPENDE OPNAMEN Neemt continu stilstaande beelden op terwijl SNAPSHOT wordt ingedrukt. OPMERKING : 0 0 0 Continu opnemen is niet beschikbaar als de beeldgrootte is ingesteld op 3840x2160.
Menu Instellingen . SPECIALE OPNAME Menu (stilstaand beeld) AUTO OPNAME Start het automatisch opnemen als het binnen het rode frame dat wordt weergegeven op de LCD-monitor veranderingen detecteert in de bewegingen (wijzigingen in helderheid) van het onderwerp. ”Automatisch opnemen bij detectie van bewegingen (AUTO OPNAME)” (A pag.
Menu Instellingen . AFSPEELINSTELLING Menu (video) DATUM ZOEKEN Vermindert het video index scherm volgens de opnamedata. ”Zoeken naar een specifieke video/stilstaand beeld op datum” (A pag. 81) DATUM/TIJD WEERGEVEN Regelt of de opnamedatum en -tijd worden weergegeven tijdens het afspelen van de video. Instelling Nadere bijzonderheden UIT Geeft tijdens het afspelen de datum en tijd niet weer. AAN Geeft tijdens het afspelen de datum en tijd weer.
Menu Instellingen . BEWERKEN Menu (video) BESCHERM/ANNULEER Beveiligt bestanden tegen ongewild wissen. ”Het bestand dat op het scherm staat beveiligen/de beveiliging ervan opheffen” (A pag. 86) ”Geselecteerde bestanden beveiligen/de beveiliging ervan opheffen” (A pag. 87) AFSPEELLIJST BEWERK. Een lijst waarin uw favoriete video’s zijn geordend wordt een afspeellijst genoemd. Als u een afspeellijst maakt, kunt u alleen uw favoriete video’s afspelen in de gewenste volgorde.
Menu Instellingen . AFSPEELINSTELLING Menu (stilstaand beeld) DATUM ZOEKEN Vouwt het indexscherm van stilstaand beelden samen volgens de opnamedatums. ”Zoeken naar een specifieke video/stilstaand beeld op datum” (A pag. 81) DIA-EFFECTEN Stel de overgangseffecten in bij het afspelen van de diavoorstelling. Instelling Nadere bijzonderheden DIA Verandert het scherm door het volgende beeld van rechts naar links in te schuiven. ROLGORDIJN Verandert het scherm door het te verdelen in verticale stroken.
Menu Instellingen . BEWERKEN Menu (stilstaand beeld) BESCHERM/ANNULEER Beveiligt bestanden tegen ongewild wissen. ”Het bestand dat op het scherm staat beveiligen/de beveiliging ervan opheffen” (A pag. 86) ”Geselecteerde bestanden beveiligen/de beveiliging ervan opheffen” (A pag.
Menu Instellingen . INSTALLATIE (video/stilstaand beeld) GIDS MOBIELE GEBR. . Geeft de QR-code weer om toegang te hebben tot de Mobiele Gebruikersgids. 0 De portaalsite verschijnt wanneer de QR-code correct is ingevoerd. Selecteer de modelnaam van uw camera om de Mobiele Gebruikersgids van uw model weer te geven. OPMERKING : 0 0 0 Voor het lezen van de QR-code is een overeenkomstige applicatie vereist. Voer de URL handmatig in de internetbrowser in als de QR-code niet kan worden gelezen.
Menu Instellingen BEDIENINGSGELUID Schakelt het bedieningsgeluid in of uit. Instelling Nadere bijzonderheden UIT Schakelt het bedieningsgeluid uit. AAN Schakelt het bedieningsgeluid in. AUTOM. UITSCHAKELEN Als deze functie is ingesteld, wordt de situatie vermeden waarin u vergeet de camcorder uit te schakelen. Instelling Nadere bijzonderheden UIT Dit apparaat wordt niet uitgeschakeld, ook al wordt deze niet gebruikt gedurende 5 minuten.
Menu Instellingen OPEN-SOURCELICENTIES (alleen opname) (GZ-EX515/GZ-EX510) Toont de open-source softwarelicenties die in dit apparaat gebruikt worden.
Menu Instellingen . INSTELLEN VERBINDING (video/stilstaand beeld) WEERGAVE OP TV Geeft pictogrammen en de datum/tijd weer op een TV-scherm. Instelling Nadere bijzonderheden UIT Geeft pictogrammen en datum/tijd niet weer op de TV. AAN Geeft pictogrammen en datum/tijd weer op de TV. VIDEO-OUTPUT Stelt het opnameformaat (16:9 of 4:3) in, afhankelijk van de aangesloten TV. Instelling Nadere bijzonderheden 4:3 Selecteer deze optie als u de camcorder verbindt met een gewone TV (4:3).
Menu Instellingen . INSTELLINGEN MEDIA (video/stilstaand beeld) SD-KAART FORMATTEREN Wist alle bestanden op de SD-kaart. Instelling Nadere bijzonderheden BESTAND Wist alle bestanden op de SD-kaart. BESTAND+MANAGEMENTNR Wist alle bestanden op de SD-kaart en zet het map-en bestandsnummer terug op ”1”. LET OP : 0 0 0 Kan niet worden geselecteerd als er geen SD-kaart is geplaatst. Alle gegevens op de SD-kaart zullen bij het formatteren verwijderd worden.
Menu Instellingen MENU USB-VERBINDING Wordt weergegeven wanneer de lichtnetadapter wordt aangesloten, nadat dit apparaat is aangesloten via USB. o GZ-EX515/GZ-EX510 AFSPELEN OP PC 0 Geeft video’s weer die opgenomen zijn door dit toestel met behulp van de LoiLoFit for Everio. ”De meegeleverde software installeren” (A pag. 99) 0 Slaat video’s die zijn opgenomen met dit apparaat op uw computer op, zonder gebruik te maken van de bijgeleverde software.
Namen van onderdelen Achterzijde . Voorzijde A SNAPSHOT (Opname Stilstaand Beeld) knop 0 Neemt een stilstaand beeld op. 0 0 0 Bij opnamen: Past het opnamebereik aan. Bij weergave (indexscherm): Gaat naar de volgende of vorige pagina. Bij videoweergave: Past het volume aan. C Schoenadapterbevestiging 0 Maakt de aansluiting mogelijk van een optionele externe microfoon. (GZ-EX515) D Stereo-microfoon 0 Bedek de microfoon niet met uw vingers tijdens de video-opname.
Namen van onderdelen Binnenzijde . Onderzijde A Luidspreker 0 Levert het geluidsignaal tijdens de videoweergave. B a (Beeldstabilisator) knop De instelling van de beeldstabilisator verandert bij elke druk terwijl de video-opname wordt gestopt. ”Vermindering van het schudden van de camera” (A pag. 56) 0 C M (Stroom) knop 0 Ingedrukt houden om de camcorder in/uit te schakelen terwijl het LCDscherm geopend is. D Microfoonconnector (GZ-EX515) ”Statiefbevestiging” (A pag.
Namen van onderdelen . LCD-monitor A LCD-monitor Schakelt de camcorder in/uit door te openen en sluiten. Als het scherm wordt gedraaid kunt u zelfportretten maken. . 0 0 ”Het aanraakscherm gebruiken” (A pag. 17) ”Namen van knoppen en functies op de LCD-monitor” (A pag. 19) LET OP : 0 Let op dat u niet met kracht tegen het oppervlak drukt, of dat het geen hevige schokken ontvangt. Hierdoor kan schade of een defect aan het scherm ontstaan.
Aanduidingen op de LCD-monitor Video-opname . . Veel voorkomende opname-aanduidingen A PRIORIT. AANR. AE/AF ”Onderwerpen duidelijk in beeld brengen (PRIORIT. AANR. AE/AF)” (A pag. 47) B Tegenlichtcompensatie ”Tegenlichtcompensatie instellen” (A pag. 38) C Autom. OPN. ”Automatisch opnemen bij detectie van bewegingen (AUTO OPNAME)” (A pag. 61) D Tele Macro ”Close-up-opnamen maken” (A pag. 40) E Scèneselectie ”Opnemen in overeenstemming met de scène (onderwerp)” (A pag.
Aanduidingen op de LCD-monitor Videoweergave . Foto-opname . A Videostand A Stilstaand beeld-stand 0 Schakelt tussen de video- en stilstaand beeld-stand. B Beeldgrootte ” BEELDGROOTTE ” (A pag. 217) C Zelfontspanner ”Groepsopnamen maken (zelfontspanner)” (A pag. 62) D Resterend aantal opnamen ”Resterende opnametijd controleren” (A pag. 66) E Scherpstelling F Bezig met opnemen 0 Schakelt tussen de video- en stilstaand beeld-stand. B Videokwaliteit ” VIDEOKWALITEIT ” (A pag.
Aanduidingen op de LCD-monitor . Weergave van stilstaande beelden A Stilstaand beeld-stand 0 Schakelt tussen de video- en stilstaand beeld-stand. B Mapnummer C Bestandsnummer D Datum/Tijd 0 Geeft de opnamedatum en -tijd weer. E Opnamemedium F Accu-indicatie G STILLE MODUS ”Gebruik van de Stille modus” (A pag. 28) H 1080p-uitgang ” HDMI-OUTPUT ” (A pag.
Oplossen van problemen Als het apparaat niet goed werkt De stroom uitschakelen Sluit de LCD-monitor. 2 Verwijder de lichtnetadapter en het accupack uit dit apparaat, breng ze terug aan en open het LCD-scherm. Hiermee wordt het apparaat automatisch ingeschakeld. (Resetten voltooid) .
Oplossen van problemen Accupack Ik kan de camera niet inschakelen wanneer het accupack wordt gebruikt. Het accupack opnieuw opladen. ”Het accupack opladen” (A pag. 14) Controleer of de contactpunten vuil zijn. Als het contactpunt van dit apparaat of van het accupack vuil is, moet het met een wattenstaafje of een vergelijkbaar voorwerp worden schoongeveegd. Indien u andere batterijdozen gebruikt buiten de JVC-batterijdozen, kunnen de veiligheid en de prestaties niet gegarandeerd worden.
Oplossen van problemen SD-kaart Afspelen Ik kan de SD-kaart niet naar binnen schuiven. Geluid of video worden onderbroken. Let op dat u de SD-kaart niet in de verkeerde richting plaatst. ”Een SD-kaart plaatsen” (A pag. 16) Soms wordt het afspelen onderbroken op plaatsen waar twee scènes op elkaar aansluiten. Dit is geen storing. Ik kan niet naar de SD-kaart kopiëren. Er is geen geluid.
Oplossen van problemen Als het apparaat via de HDMI Mini-kabel op een TV wordt aangesloten, wordt het beeld en/of het geluid niet doorgegeven. Het beeld en geluid wordt mogelijk niet goed weergegeven, afhankelijk van de aangesloten TV. Voer in dergelijke gevallen de volgende bewerkingen uit. A Koppel de HDMI-minikabel los en sluit deze weer aan. B Zet het apparaat uit en weer aan. ”Aansluiten via de HDMI Mini Connector” (A pag. 83) Bewerken/Kopiëren Ik kan een bestand niet wissen.
Oplossen van problemen Computer Ik kan geen bestanden kopiëren naar de harde schijf van de computer. Als de bijgeleverde software LoiLoFit for Everio niet is geïnstalleerd, werken bepaalde functies mogelijk niet goed. ”De meegeleverde software installeren” (A pag. 99) Controleer voor u een backup maakt of er genoeg vrije ruimte is op de harde schijf (HDD) van de computer. Het is niet mogelijk om bestanden met een pc naar dvd of Bluray-disk te kopiëren.
Oplossen van problemen Andere problemen De knoppen op het aanraakscherm werken niet. Tik op de knoppen op het aanraakscherm met uw vingers of met de stylus pen. De knoppen reageren mogelijk niet als u ze aanraakt met uw vingernagels of met handschoenen aan. Sla de opgenomen gegevens op voor u onderhoud aanvraagt. AMaak een verbinding met een computer met behulp van een USB-kabel. Het menu ”APPARAAT SELECTEREN” verschijnt. BHoud de START/STOP-knop ingedrukt gedurende meer dan 2 seconden.
Oplossen van problemen Foutmelding? STEL DATUM/TIJD IN! Sluit de lichtnetadapter aan, laad de accu gedurende meer dan 24 uur op en stel de klok in. (Als de melding nog steeds wordt weergegeven, is de batterij van de klok leeg. Raadpleeg een JVC-dealer bij u in de buurt.) ”Instelling van de klok” (A pag. 21) COMMUNICATIEFOUT Sluit de USB-kabel terug aan. Schakel dit apparaat en de apparaten die ermee verbonden zijn uit en schakel ze terug in. Het accupack opnieuw bevestigen.
Oplossen van problemen UITGESCHAKELD OF USB APP NIET ONDERSTEUND Schakel de stroom in van het aangesloten USB-apparaat.
Onderhoud Onderhoud dit apparaat regelmatig, zodat deze gedurende een lange periode meegaat. LET OP : 0 Maak het accupack, de lichtnetadapter en de stekker los voor u eender welke vorm van onderhoud uitvoert. Camcorder 0 0 Veeg dit apparaat schoon met een droge, zachte doek om het vuil te verwijderen.
Technische gegevens Camera Onderdeel Connectors Nadere bijzonderheden Stroomvoorziening Met de lichtnetadapter: DC 5,2 V Met het accupack: DC 3,6 V Stroomverbruik (GZ-EX515/GZ-EX510) 2,6 W (MONITOR HELDERHEID: 3 (standaard)) (GZ-E509/GZ-E505) 2,5 W (MONITOR HELDERHEID: 3 (standaard)) Nominaal stroomverbruik: 1 A Afmetingen (mm) Massa 53,5 x 59,5 x 116,5 (B x H x D: zonder handgreep) (GZ-EX515) Ongeveer 255 g (enkel camera), Ongeveer 295 g (met bijgeleverde batterijdoos) (GZ-EX510) Ongeveer 225 g (en
Technische gegevens Beeldgrootte ”Geschat aantal stilstaande beelden (Eenheid: aantal opnamen)” (A pag.