Operation Manual

42
DPOF Print Setting –
#
mode only
The number of prints to make of a still image
recorded on an SD card can be set. This
feature is useful when taking the SD card to a
photo lab for printing.
Preparation:
•
Slide the power/mode switch to MODE to
select
#
mode.
•
Press the PLAY/REC button to select
playback mode.
•
Set [REC MEDIA FOR IMAGE] to [SD].
(Z pg. 69)
1
FUNCTION
EFFECT
DPOF
MOVE
COPY
PROTECT
DELETE
2 Select [DPOF].
Select
Set
DPOF
CHECK SETTINGS
RESET
ALL 1
SELECT IMAGES
SELECT
SET QUIT
Setting Files Individually
After performing steps 1-2
3 Select [SELECT IMAGES].
Select
Set
DPOF TOTAL: 0
8/8
SELECT
SET QUIT
Managing Files (Continued)
To Extract a Still Image File From a
Video File – ! mode only
You can extract the desired scene from a
recorded video file, and record it as a still
image file.
Preparation:
•
Slide the power/mode switch to MODE to
select
!
mode.
•
Press the PLAY/REC button to select
playback mode.
1 Select the desired video file.
Select
Set
VIDEO
8/8
SELECT
SET SORT
Playback starts. Search the desired scene.
2
SNAP
SHOT
NOTES
•
Extracted still images are stored at a
resolution of 1920 x 1080. The image can
be elongated in the horizontal or vertical
directions depending on the picture quality
of the source video file.
•
Images cannot be extracted when the video
file is in search or slow-motion playback.
Extract images when the video is in normal
playback, or when it is paused.
•
The continuous shooting function (Z pg. 69)
cannot be used to extract images.