ENGLISH EN INSTRUCTIONS HARD DISK CAMCORDER GZ-MG175E/EK Dear Customer Thank you for purchasing this hard disk camera. Before use, please read the safety information and precautions contained in pages 2 and 3 to ensure safe use of this product.
Safety Precautions IMPORTANT (for owners in the U.K.) Connection to the mains supply in the United Kingdom. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover.
[European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to Attention: the applicable collection This symbol is only point for the recycling of valid in the European electrical and electronic Union. equipment for proper treatment, recovery and recycling in accordance with your national legislation.
Read This First! Make a backup of important recorded data JVC will not be responsible for any lost data. It is recommended to copy your important recorded data to a DVD or other recording media for storage. ( pg. 40) Make a trial recording Before the actual recording of important data, make a trial recording and play back the recorded data to check that the video and sound have been recorded correctly. Reset the camera if it does not operate correctly This camera uses a microcomputer.
Contents EDITING/PRINTING Accessories ............................................ 6 Managing Files ..................................... 30 How to Use the Everio Dock ......................... 6 Attaching the Shoulder Strap ........................ 7 Attaching the Core Filter ................................ 7 Preparing the Remote Control ....................... 7 Deleting/Protecting Files ............................. 30 Viewing File Information .............................
Accessories or Everio Dock CU-VC3U ( below) AC Adapter AP-V17E/14E Power Cord (for AP-V14E only) Battery Pack BN-VF808U Audio/Video Cable USB Cable ( pg. 38, 40 and PC OPERATION GUIDE) Shoulder Strap ( pg. 7) CD-ROM ( PC OPERATION GUIDE) Remote Control Unit RM-V750U ( pg. 7) Lithium Battery CR2025 Pre-installed in the remote control unit. Core Filter ( pg. 7) NOTE Make sure to use the provided cables for connections. Do not use any other cables.
Thread the strap through the buckle, adjust its length, and use the strap guide to fix it in place. Peel off the pad and thread the end of the strap through the eyelet. Position the buckle near the eyelet and reattach the pad. ENGLISH Attaching the Shoulder Strap Buckle Strap Guide Eyelet Attaching the Core Filter Attach the core filter to the AC adapter’s DC cord. The core filter reduces interference. Release the stopper. 3 cm Wind once.
Index NOTES • The LCD monitor can rotate 270°. • Power-linked operation You can also turn the camera on/off by opening/closing the LCD monitor during the recording mode. • Be careful not to cover 4, 5, 7 and 9 during shooting.
! Index Button [INDEX] ( pg. 26)/ Remaining Space Button/Data Battery Button [ 0 / 1 ] ( pg. 14, 19) # Set Lever Move to ¡ : Reverse Skip ( pg. 24)/Up/Backlight Compensation [ - ] ( pg. 21)/Spot Exposure Control [ . ] ( pg. 21) Move to ¢ : Forward Skip ( pg. 24)/Down/ Change LED Light Setting [LIGHT] ( pg. 18) Move to £ : Reverse Search ( pg. 24)/Left/ Nightscope [NIGHT] ( pg. 21) Move to ¤ : Forward Search ( pg. 24)/Right/ Program AE [PROGRAM AE] ( pg. 20) Press down: Play/Pause ( pg.
Indications on LCD Monitor During both Video and Still Image Recording During Video Recording Only 16:9 [5h56m] 0:04:01 0 A 200X W T 1/250 16:55 20.01.2007 ! Selected Operation Mode Indicator ( pg. 20) 4 : Auto Mode 3 : Manual Mode # Tele Macro Mode Indicator ( pg. 23) $ Approximate Zoom Ratio ( pg. 18) % Zoom Indicator ( pg. 18) & Shutter Speed ( pg. 23) ( White Balance Indicator ( pg. 23) ) Brightness Control Indicator ( pg. 48) * Battery Indicator ( pg. 54) + Date/Time ( pg.
During Still Image Playback X-60 9:55:01 101-0098 16:55 20.01.2007 16:55 20.01.2007 ! Mode Indicator ( pg. 24) # 6 : Playlist Playback Indicator (Appears when playing back a playlist.) ( pg. 35) ¨ª : Event Search Playback Indicator (Appears when playing back a video file from the event search.) ( pg. 27) ¨© : Date Search Playback Indicator (Appears when playing back a video file from the date search.) ( pg. 26) $ Picture Quality: B (ultra fine), C (fine), D (normal), E (economy) ( pg.
Necessary Settings before Use Access/Charge Lamp 2 Attach the battery pack. Slide the battery pack down until it locks in place. MENU Bottom of the Camera BATT. 3 Connect the AC adapter. DC Connector Set Lever To AC Outlet (110V to 240V) Power/Mode Switch Be sure to configure the following three settings before use. Charging the Battery Pack 1 Open the cover. Set the power/mode switch to OFF. Slide while pressing down the lock button.
Date/Time Setting The language on the display can be changed. After performing steps 1-4 ( left column) 1 5 Set the power/mode switch to ON. Slide while pressing down the lock button. ENGLISH Language Setting Select [CLOCK ADJUST]. Select GENERAL DATE MODE 31 TIME 01 2007 11 07 ON Set OFF (CHARGE) 2 6 REC MEDIA FOR VIDEO SCENE COUNTER QUALITY ZOOM DIS QUIT SELECT SET 3 VIDEO Select [GENERAL]. Select Set 5 Set the date and time.
Other Settings Lens Cover Switch Checking the Remaining Battery Power Preparation: • Set the power/mode switch to OFF. • Attach the battery pack. BATTERY CONDITION 100% MAX TIME 50% INDEX min 0% Battery information is displayed for approx. 5 seconds if the button is pressed and released quickly, and for approx. 15 seconds if the button is pressed and held for several seconds. Power/Mode Switch INDEX NOTES • If “COMMUNICATING ERROR” appears, Grip Adjustment Open the pad and make grip adjustments.
If you want to record to an SD card, the following three operations need to be performed. Compatible SD cards: Panasonic, TOSHIBA and SanDisk. 128 MB to 4 GB. • If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded. • For video recording, use a high-speed SD card (at least 10 MB/s). • MultiMediaCards are not supported. Q Insert an SD card Preparation: Set the power/mode switch to OFF. 1 Open the SD card cover.
Recording Files Video Recording Preparation: Set the power/mode switch to ON. Slide the power/mode switch to MODE to select ! (video) mode. MODE ON OFF The switch returns to the original position when it is released. Press the PLAY/REC button to select recording mode. SELECT PLAY/REC 16:9 [5h56m] The ! lamp on the camera lights up. Press the REC button to start recording. REC [5h56m] REC Approximate remaining time for recording appears. 8 To stop recording Press the REC button again.
ENGLISH Still Image Recording Preparation: Set the power/mode switch to ON. Slide the power/mode switch to MODE to select # (still image) mode. MODE ON OFF The switch returns to the original position when it is released. Press the PLAY/REC button to select recording mode. 640 SELECT PLAY/REC FINE [ 9 9 9 9 ] The # lamp on the camera lights up. Press and hold the SNAPSHOT button halfway. 640 FINE [ The ? indicator becomes green when the captured image is focused.
Recording Files (Continued) Zoom Lever LED Light Preparation: • Slide the power/mode switch to MODE to select ! or # mode. • Press the PLAY/REC button to select recording mode. PLAY/REC Button INDEX A Each time you move the set lever to ¢, setting changes. The light remains on regardless of the surrounding conditions. Power/Mode Switch The light turns on automatically when shooting in insufficient light conditions.
NOTE If you select an event to register the file to before starting recording, the file will be registered to the selected event, thus making the file easy to find at playback. There are up to 3 different destinations within each event (for example: BABY1, BABY2, BABY3). Preparation: • Slide the power/mode switch to MODE to select ! mode. • Press the PLAY/REC button to select recording mode. 1 Once you select to register a file to a certain event, the setting will remain even if you turn the power off.
Manual Recording Set Lever Program AE PLAY/REC Button You can record videos or still images with optimum brightness by adjusting the exposure and shutter speed to suit your surroundings or the subject. After performing “To Change to Manual Recording Mode” ( left column) 1 OFF FUNCTION INFO Power/Mode Switch 2 Select the desired setting. For details on each setting, see below. Select Manual recording mode enables you to set the focus and screen brightness etc. manually.
Spot Exposure Control Use this function when backlight compensation does not work well, or to adjust the brightness in the desired spot. After performing “To Change to Manual Recording Mode” ( pg. 20) After performing “To Change to Manual Recording Mode” ( pg. 20) NIGHT The shutter speed is automatically adjusted from 1/2 to 1/250 seconds. It enables recording with low light levels in dim locations. A 8 To cancel nightscope Move the set lever to £ (NIGHT) so that the 5 indicator disappears.
Manual Recording (Continued) Manual Setting in Function Menu 3 Select the desired setting. Select ADJUST BRIGHTNESS AUTO 0 You can use manual recording functions easily by selecting items in the function menus. Set After performing “To Change to Manual Recording Mode” ( pg. 20) 1 2 FUNCTION FOCUS ADJUST BRIGHTNESS SHUTTER SPEED WB EFFECT TELE MACRO Depending on the kind of settings you select, you can set the value by moving the set lever to ¡ / ¢ after selecting.
SHUTTER SPEED A fast shutter speed can freeze the motion of a fast-moving subject, and a slow shutter speed can blur the subject to give the impression of motion. Settings: [ ] = Factory-preset [AUTO]: The shutter speed is adjusted automatically. 1/2 to 1/4000 (For ! mode) / 1/2 to 1/500 (For # mode): The smaller the value, the faster the shutter speed. Move the set lever to ¡ / ¢ to set the value. ENGLISH Menus NOTE It is recommended to use the tripod ( pg.
Playing Back Files Video Playback Slide the power/mode switch to MODE to select ! (video) mode. MODE ON OFF The switch returns to the original position when it is released. Press the PLAY/REC button to select playback mode. SELECT PLAY/REC VIDEO SELECT The ! lamp on the camera lights up. 8/8 SET SORT The index screen for videos appears. Move the set lever to ¡ / ¢ / £ / ¤ to select the desired file, then press down. Select Set 8 To return to the index screen Press INDEX.
Slide the power/mode switch to MODE to select # (still image) mode. MODE ON OFF Press the PLAY/REC button to select playback mode. SELECT PLAY/REC The switch returns to the original position when it is released. The # lamp on the camera lights up. IMAGE SELECT ENGLISH Still Image Playback 8/8 SET SORT The index screen for still images appears. Move the set lever to ¡ / ¢ / £ / ¤ to select the desired file, then press down. Select Set 8 To return to the index screen Press INDEX.
Playing Back Files (Continued) 2 Select the recording date. Select Power/Mode Switch 07 01 2007 1/3 INDEX Set 3 SELECT SET SORT Select the file you want to play back. Select Set FUNCTION PLAY/REC Button 8 To return to the index screen Press the INDEX button. Set Lever Event Screen – ! mode only File Search Function You can switch the index screen to the date index screen or event screen for the convenient file search. The event screen can be used in ! mode. It cannot be used in # mode.
Select the event. To move to the next page, select [NEXT PAGE]. Select SEARCH EVENT ALL SCENES 25 01 2007 22 01 2007 Set 3 SELECT SET SORT Select the recording date. To display all the files, select [ALL SCENES]. Select VACATION 1/3 To Play Back Demonstration Files – ! mode only Video files that are used for demonstration in a shop may be recorded on the camera you purchased. These files are saved to the [EXTMOV] folder and can be played back by the following operations.
Playing Back Files (Continued) 8 Items for WIPE/FADER setting Playback with Special Effects • O FADER:WHITE: Wipe or fader effects Add effects at the beginning and end of videos. These effects cannot be set for still images. Playback effects Add effects that, for example, alter the colour tones of images. Preparation: • Slide the power/mode switch to MODE to select ! or # mode. • Press the PLAY/REC button to select the playback mode. ex.) Set [EFFECT] to [SEPIA].
Watching Images on TV AV Connector ENGLISH Preparation: Turn off all units. AV Cable AV Input Connector DC Connector AC Adapter To AC Outlet NOTES • You can also connect the cables using the Everio dock connectors. The S-Video cable (optional) enables even higher quality playback. ( pg. 6) When other devices such as a DVD burner are connected to the Everio dock, switch off these devices power. • This camera is designed to be used with PAL-type colour television signals.
Managing Files Zoom Lever Set Lever PLAY/REC Button Preparation: • Slide the power/mode switch to MODE to select ! or # mode. • Press the PLAY/REC button to select playback mode. ex.) Performing [DELETE]. 1 2 FUNCTION INFO Select [DELETE] or [PROTECT]. Select Power/ Mode Switch DELETE CURRENT FILE SELECT DELETE ALL Set CAUTION Do not remove the recording medium or perform any other operation (such as turning off the power) while accessing files.
Deleting/Protecting All Files After performing steps 1-2 ( pg. 30) After performing steps 1-2 ( pg. 30) 3 3 Select [FILE SELECT]. Select VIDEO DELETE 8/8 ENGLISH Selecting and Deleting/Protecting Files Select [DELETE ALL] or [PROTECT ALL]. Select DELETE ALL? EXCEPT PROTECTED FILE Set 4 EXECUTE SELECT SET QUIT CANCEL Set Select the desired file. Select VIDEO DELETE 8/8 4 SELECT SET Select [EXECUTE]. Select Set SELECT SET QUIT • The $ or x mark appears on the file.
Managing Files (Continued) Viewing File Information Preparation: • For ! mode: Pause the playback. Alternatively, select the file on the index screen. • For # mode: Play back the still image. Alternatively, select the file on the index screen. INFO FILE FOLDER DATE/TIME PB TIME QUALITY PROTECT : MOV005.MOD : PRG001 : 01.01.
FUNCTION EVENT RE-REGISTRATION ENDS DO YOU WANT TO SAVE? 4 Set the point at which you want to divide the file. SAVE AND QUIT DELETE AND QUIT CANCEL SELECT 6 COPY 1st SECTION ENGLISH 5 COPY 2nd SECTION SET CANCEL Select [SAVE AND QUIT]. SELECT Select 5 SET 00 : 24 : 18 QUIT Select the file you want to copy. • [COPY 1st SECTION]: Copy the section before the division point. • [COPY 2nd SECTION]: Copy the section after the division point. Set 8 To exit the screen Press FUNCTION.
Playlists – ! mode only 3 Power/Mode Switch Select [NEW LIST]. Select NEW LIST IMPORT FROM EVENT IMPORT FROM DATE INDEX ALL SCENES Set 4 SELECT SET QUIT Select an item and display files. Select Set • [IMPORT FROM EVENT]: Search for an event and display the corresponding files listed by recording date. Move the set lever to ¡ / ¢ / £ / ¤ to select the event, then press down. • [IMPORT FROM DATE]: Display all the files in the medium listed by recording date.
Select the insertion point. Select EDIT Playing Back Playlists 8/8 TOTAL 30h15m Set SELECT FUNCTION REGISTER • To add other files, repeat steps 5 and 6. • To delete a registered scene, move the set lever to ¡ / ¢ to select the registered file, then press down. 7 1 2 Select [PLAYBACK PLAYLIST]. Select FUNCTION SAVE AND QUIT DELETE AND QUIT Set CANCEL 8 SET Select [SAVE AND QUIT]. 3 Select Set Set NOTES • A maximum of 99 playlists can be created.
Playlists – ! mode only (Continued) Other Operations of Playlists You can perform additional editing and delete files in a created playlist. Preparation: Perform steps 1-2. ( pg. 34) Adding/Deleting Files in Playlist 3 Move the set lever to ¡ / ¢ to select [EDIT], then press down. 4 Move the set lever to ¡ / ¢ to select the playlist you want to edit, then press down. To add or delete files, follow the steps 5 to 8 in “Creating Playlists”. ( pg.
Print Setting – # mode only Power/Mode Switch Setting Files Individually ENGLISH Set Lever After performing steps 1-2 3 Select [SELECT IMAGES]. Select Set 4 DPOF TOTAL: SELECT 0 SET 8/8 QUIT Select the desired file. Select FUNCTION PLAY/REC Button DPOF Print Setting Set If you slide and hold the zoom lever towards T, the preview screen of the still image is displayed. 5 This camera is compatible with DPOF (Digital Print Order Format).
Print Setting – # mode only (Continued) Setting All Files Together (One Print for Each) After performing steps 1-2 ( pg. 37) 3 Select [ALL1]. Select Direct Printing with PictBridge Printer If your printer is compatible with PictBridge, still images can be printed easily by connecting the camera directly to the printer with the USB cable. DPOF setting can also be used. ( pg. 37) ALL1 EXECUTE Preparation: Set the power/mode switch to OFF.
After performing steps 1-2 ( pg. 38) 3 Select [SELECTED PRINT]. To Print Using the DPOF Settings If the printer is compatible with DPOF, you can use the DPOF settings. ( pg. 37) After performing steps 1-2 ( pg. 38) Select 3 PRINT THIS IMAGE Select [DPOF PRINT]. Select DPOF PRINT SET CHECK SETTINGS Set 4 ENGLISH To Print by Selecting a Still Image PRINT CANCEL Select the desired Image. Set SELECT SET Select NUMBER OF PRINTS DATE PRINT CANCEL 1 OFF 4 Select [PRINT].
Copying Files Set Lever Power/Mode Switch Using a DVD Burner to Copy Files from the Camera (DVD Creation Function) INDEX Supported discs: 12cm DVD-R, DVD-RW • Regarding DVD-R discs, only unused DVDR discs can be used. Regarding DVD-RW discs, used DVD-RW discs can also be used, but they need to be formatted before recording. Formatting a disc deletes all content recorded on the disc up until that time. • Dual-layer discs cannot be used.
Files that have never been copied to the DVD discs are automatically selected and copied. 1 Set the power/mode switch to ON. SELECT FROM SCENES ALL SCENES SELECT FROM EVENT SELECT FROM DATE SELECT FROM PLAYLIST ON OFF SELECT SET 2 Select an item and display the DVD Creation List for the files to be copied. QUIT Set DVD CREATION LIST ALL DVD1 01.01.2007 12:04 01.01.2007 12:15 DVD2 01.02.2007 12:04 01.02.
Copying Files (Continued) 3 Select the desired disc number. • If you select [ALL], all discs in the list are created. • To preview scenes, move the set lever to ¡ / ¢ to select the file and press the INDEX button. When the index screen of individual scenes appears, move the set lever to ¡ / ¢ / £ / ¤ to select the file, then press down. To return to previous screen, press INDEX. • mark shows that the disc is created already. 4 ALL WILL BE CREATED TIME REQUIRED: 45 MIN.
8 Menu for disc playback When you play back the created DVD disc on a DVD player or other devices, the following top menu will be displayed. 25.01.2007 10.01.2007: records file 1 and 2. File 2 File 1 11.01.2007: records file 3 and 4. File 4 File 3 07.01.2007 ! # $ % Create a DVD Title 1 File 1 1 Chapter ENGLISH 8 Title and chapter of created DVD Each recording date becomes one title in a created DVD and each scene recorded in a same day becomes one chapter in the title.
Copying Files (Continued) Using a VCR/DVD Recorder to Dub Files from the Camera 1 2 Preparation: Turn off all units. playlists using a VCR/DVD recorder” pg. 35) 3 At the point you want to start dubbing, start recording on the VCR/DVD recorder. Refer to the VCR/DVD recorder’s instruction manual. DC Connector AC Adapter AV Cable VCR/DVD Recorder AV Input Connector You can also connect the cables using the Everio dock connectors.
4 ENGLISH Copying/Moving Still Image Files You can copy or move still image files between the HDD and SD card using the onscreen display. Preparation: • Slide the power/mode switch to MODE to select # mode. • Press the PLAY/REC button to select playback mode. • Make sure that SD card is inserted in the SD slot. • Make sure that enough free space is left in the copy/move destination medium. 1 5 • [FILE]: Select when you want to transfer the selected files.
Changing the Menu Settings 4 ex.) Set [DEMO MODE] to [OFF]. 1 VIDEO MENU For details on each menu, see below. REC MEDIA FOR VIDEO SCENE COUNTER QUALITY ZOOM DIS QUIT SELECT SET 2 Select Set SELECT SET QUIT VIDEO 5 Select the desired setting from the third menu item. Select Select the desired menu from the first menu item. Set • [VIDEO]: Display menus related to ! mode. • [IMAGE]: Display menus related to # mode. • [GENERAL]: Display menus common to ! and # modes.
Settings: [ ] = Factory-preset OFF: Disables the function. [ON]: Activates the function. q DIS Compensates for hand shake. ENGLISH Menus NOTES • Accurate stabilisation may not be possible if hand shake is excessive, or depending on the shooting conditions. • Switch off this mode when recording with the camera on a tripod. OFF: Records videos in 4:3 size. [ON]: Records videos in 16:9 size. The 16:9 indicator lights up on the LCD monitor.
Changing the Menu Settings (Continued) Menus Settings: [ ] = Factory-preset p GAIN UP Makes the subject appear bright automatically when you record in dark places. However, the overall colour tones appear grayish. OFF: Disables the function. [ON]: Activates the function. [OFF]: Disables the function. ON: Activates the function. # IMAGE { CONTINUOUS SHOOTING Records still images continuously while the SNAPSHOT button is pressed. NOTES • The interval between recording still images is approx. 0.
Settings: [ ] = Factory-preset Enables you to select the TV type when watching files recorded on the camera on your TV. 4:3 / [16:9] l DISPLAY OFF: Turns off the on-screen display. [ON]: Turns on the on-screen display. Enables you to set whether to display the on-screen display. % DISPLAY ON TV Used for displaying camera’s onscreen display on a TV screen. 9 LANGUAGE Enables you to set the display language. ( pg. 13) : CLOCK ADJUST Enables you to set the time. ( pg.
Changing the Menu Settings (Continued) Menus ) CLEAN-UP HDD Writing speed to HDD tends to become slow after long periods of repeated use. Execute cleanup periodically to regain the writing speed. * FORMAT HDD This will ensure stable speeds and operation when accessing the hard disk drive. Settings: [ ] = Factory-preset Connect the AC adapter. EXECUTE: Performs this function. Select [OK] when completed. [CANCEL]: Cancels this function.
Troubleshooting The following phenomena are not malfunctions. • The camera heats up when it is used for a long time. • The battery heats up during charging. • When playing back a video file, the image stops momentarily or the sound is interrupted at junctions between scenes. Trouble No power is supplied. • To solve the problem, first follow the instructions below. • If the problem is not solved, reset the camera.
Troubleshooting (Continued) Trouble Images on the LCD monitor appear dark or whitish. Displays Coloured bright spots appear on the LCD monitor. Aspect ratio of the image is strange when watching images on your TV. Recording cannot be performed. 48 – • The LCD monitor is made with high precision technology. – • Change the settings in [SELECT TV TYPE] so that it 49 • Recording medium is full. Delete unnecessary files or 30 its service life, images on the LCD monitor become dark.
Action Recording • Do not select the sepia (SEPIA) or monotone 23 The continuous shooting speed is slow. • The continuous shooting speed will drop when – Playback cannot be performed. (MONOTONE) mode before setting white balance. repeatedly making continuous shots, when using certain recording media, or under certain recording conditions. • Select the recording medium properly. • To watch images on a TV, set the TV’s input mode or 47, 48 29 channel that is appropriate for video playback.
Warning Indications Meaning/Action • Displays the remaining battery power. – Indication (Battery indicator) High Exhausted • As the battery power comes close to nil, the battery – • Appears when the date/time is not set. • The built-in clock’s rechargeable lithium battery is 13 12 • Appears for 5 seconds after power is turned on in recording – • Remove the card once and insert it again. If the error is 15 indicator blinks. When the battery power is exhausted, power turns off automatically.
Meaning/Action • The data may not be recorded on the recording medium correctly. Try recording again. • Otherwise, clean up the recording medium. 50 DROP DETECTION WORKED AND THE POWER IS TURNED OFF • To turn the unit on again, set the power/mode switch to – – ENGLISH Indication RECORDING MAY NOT BE CORRECT ON THE MEMORY CARD OFF, and to ON again. Cleaning Before cleaning, turn off the camera and remove the battery pack and AC adapter. 8 To clean the exterior Wipe gently with a soft cloth.
Specifications Camera 8 For general Power supply DC 11 V (Using AC adapter) DC 7.2 V (Using battery pack) Power consumption Approx. 3.2 (3.4)* W *When using the LED light Dimensions (W x H x D) 66 mm x 71 mm x 110 mm Weight Approx. 330 g (incl. strap) Approx. 375 g (incl. battery and strap) Operating temperature 0°C to 40°C Operating humidity 35% to 80% Storage temperature –20°C to 50°C Pickup 1/6 ″ (1,070,000 pixels) CCD Lens Video: F 1.8 to 4.5, f = 2.5 mm to 80 mm, 32:1 power zoom lens Still image: F 1.
Power supply DC 3 V Battery life Approx. 1 year (depending on the frequency of use) Operating distance Within 5 m Operating temperature 0°C to 40°C ENGLISH Dimensions (W x H x D) 42 mm x 14.5 mm x 91 mm Weight Approx. 30 g (incl. battery) Remote Control Design and specifications subject to change without notice.
Cautions Battery Packs The supplied battery Terminals pack is a lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: To avoid hazards ... do not burn. ... do not short-circuit the terminals. Keep it away from metallic objects when not in use. When transporting, make sure the provided battery cap is attached to the battery. If the battery cap is misplaced, carry the battery in a plastic bag. ... do not modify or disassemble. ...
• For safety, DO NOT ... open the camera’s chassis. ... disassemble or modify the unit. ... allow inflammables, water or metallic objects to enter the unit. ... remove the battery pack or disconnect the power supply while the power is on. ... leave the battery pack attached when the camera is not in use. ... place naked flame sources, such as lighted candles, on the apparatus. ... expose the apparatus to dripping or splashing. • Avoid using the unit ... in places subject to excessive humidity or dust. ...
Terms A AC Adapter ..................................................... 12 Adjust Brightness ........................................... 22 Auto Power Off ............................................... 49 B Backlight Compensation ................................. 21 Battery Pack ....................................... 12, 14, 58 Brightness Control (LCD Monitor) .................. 48 C Clean-up HDD ................................................ 50 M Manual Recording ...................................