Operation Manual

22
Manual Setting in Function Menu
You can use manual recording functions
easily by selecting items in the function
menus.
After performing “To Change to Manual
Recording Mode” ( pg. 20)
1
FUNCTION
FOCUS
ADJUST BRIGHTNESS
TELE MACRO
EFFECT
WB
SHUTTER SPEED
2 Select the desired menu.
For details on each menu, see below.
Select
Set
ADJUST BRIGHTNESS
AUTO
0
3 Select the desired setting.
Select
Set
ADJUST BRIGHTNESS
AUTO
0
Depending on the kind of settings you
select, you can set the value by moving the
set lever to ¡ / ¢ after selecting.
4
FUNCTION
16:9
2
The menu disappears and the indicator for
the set function appears.
8 To return to the previous screen
Move the set lever to £.
8 To exit the screen
Press FUNCTION.
Manual Recording (Continued)
Menus Settings: [ ] = Factory-preset
FOCUS
Adjusts the focus.
[AUTO] : The focus is adjusted automatically.
@ 9 : A : Adjusts the focus manually. Move the set lever to £ / ¤
to set the focus. (When zooming, the subject will not go out of
focus if you adjust the focus at the telephoto (T) side before
zooming to the wide-angle (W) side.)
ADJUST BRIGHTNESS
Adjusts the brightness.
For ! mode
[AUTO] : The brightness is adjusted automatically.
–6 to +6 : Corrects the brightness within this range in increments
of 1. Move the set lever to ¡ / ¢ to set the value.
For
# mode
[±0] : The brightness is not adjusted.
–2.0 to +2.0 (EV) : Corrects the brightness within this range in
increments of 1/3EV. Move the set lever to ¡ / ¢ to set the
value.
8 To lock the exposure
When the menu disappears after you fi nish confi guring the
setting, press and hold the set lever for more than 2 seconds.
The
C
indicator appears.