CAMCORDER GZ-R10 Detailed User Guide LYT2701-002A
Table of Contents Getting Started Verifying the Accessories ........................................................ 3 Turning on this Unit .................................................................. 4 Opening the Terminal Cover (SD Card Cover) ........................ 5 Charging .................................................................................. 5 Resetting this Unit .................................................................... 6 Grip Adjustment ................................
Getting Started Verifying the Accessories If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center. Illustration Description . AC Adapter AC-V11U 0 Charges this unit. Attach the charging adapter cable to the tip of the cord. It can also be used when recording or playing back videos indoors. Charging Adapter Cable Attach to the tip of the cord of the AC adapter and connect to the USB connector of this unit to charge. . 0 .
Getting Started Turning on this Unit Open the LCD monitor to turn on this unit. To turn off the power, close the LCD monitor. o To turn on the power . Open the LCD monitor. o To turn off the power . Close the LCD monitor. The POWER/ACCESS lamp goes off and the power is turned off. “POWER/ACCESS (Power/Access) Lamp” (A p.
Getting Started Opening the Terminal Cover (SD Card Cover) Charging This unit is equipped with a built-in battery. Open the connector cover, and connect the AC adapter for charging as shown in the figure. . . o To open A Open the LCD monitor. B Slide down the terminal cover lock and slide the cover aside. C Lift the cover slowly. . o To close Leave the LCD monitor open first. A Flip down the cover slowly while making sure the gray waterproof seal fits into the opening at the terminals.
Getting Started Resetting this Unit Grip Adjustment When a malfunction occurs on this unit, reset the unit in the following way. Open the terminal cover. 0 Remove the power cord and all connecting cables. 2 Close the LCD monitor to turn off this unit. 3 Press the Reset button gently using an object with pointed tip. . 1 A Open the pad B Adjust the length of the belt C Close the pad Caution : 0 0 Press the Reset button just once gently. Do not use sharp pointed objects.
Getting Started Attaching the Core Filter (for Optional AV Cable) Insert a commercially available SD card before recording. “Types of Usable SD Card” (A p. 8) “Approximate Video Recording Time” (A p. 43) 1 Open the terminal cover. 2 Close the LCD monitor to turn off this unit. 3 Insert an SD card. . . . Attach a core filter to the AV cable that is connected to this unit. The core filter reduces interference when this unit is connected to other devices.
Getting Started Memo : Removing the Card Push the SD card inward once, then pull it out straight. 0 0 0 0 . 0 Types of Usable SD Card 0 0 The following SD cards can be used on this unit. Operations are confirmed on the SD cards from the following manufacturers. 0 Panasonic 0 TOSHIBA 0 SanDisk 0 SD Card 0 0 0 Using SD cards (including SDHC/SDXC cards) other than those specified above may result in recording failure or data loss. This unit is not guaranteed to operate with all SD cards.
Getting Started Using the Touch Screen The LCD monitor of this unit is a touch panel which enables operations by touching the screen. Icon operation buttons, thumbnails, and menu items are displayed on the touch screen according to the mode in use. 0 There are two ways to operate the touch screen, namely “tap” and “drag”. The following are some examples. Adjusting the Touch Panel Adjusts the response position of the buttons on the touch screen. 1 Tap “MENU”. 2 Tap “SETUP”.
Getting Started 6 Tap “OK”. Names of Buttons and Functions on the LCD Monitor The following screens are displayed during the A video and B still image modes, and operate as touch screens. . Recording Screen (Video/Still Image) 0 Setting ends and returns to the menu screen. Caution : Do not tap areas other than the “+” mark during touch screen adjustment (steps 4 - 5). Doing so may cause the touch screen to malfunction. Memo : 0 0 Adjust by lightly tapping with a corner of an SD card, etc.
Getting Started Playback Screen (Still Image) . . Playback Screen (Video) 0 1 When this unit is not operated, the operation buttons on the LCD monitor disappear automatically. Tap on the screen to display the operation buttons again. A/B (Video/Still Image) Mode Button 0 2 3 Displayed when playback is paused. Saves one scene of the video being played back as a still image. 2 3 6 7 4 Returns to the index screen (thumbnail display). “Operation Buttons for Video Playback” (A p.
Getting Started Menu screen (recording mode) . . Index Screen (Thumbnail Display) Display 1 A/B (Video/Still Image) Mode Button 0 2 Page Forward/Back Button Recording Mode Button 0 4 5 6 2 3 CONNECTION SETTINGS Menu “CONNECTION SETTINGS (video/still image)” (A p. 92) Delete Button 4 “Deleting Selected Files” (A p. 56) “Deleting the Currently Displayed File” (A p. 56) 5 Help Button Tap the K (help) button and item to display descriptions. SILENT Button “Using the Silent Mode” (A p.
Getting Started Menu screen (playback mode) Clock Setting The “SET DATE/TIME!” screen appears when you turn on this unit for the first time after purchase, when it has not been used for a long time, or when the clock is not set yet. Set the clock before recording. Open the LCD monitor. . 1 1 PLAYBACK SETTING Menu “PLAYBACK SETTING Menu (video)” (A p. 86) “PLAYBACK SETTING Menu (still image)” (A p. 88) CONNECTION SETTINGS Menu . 2 0 0 “CONNECTION SETTINGS (video/still image)” (A p.
Getting Started Resetting the Clock Set the clock with “DATE & TIME” from the menu. Tap “MENU”. . 1 0 . 0 Tap “SETUP”. 3 Tap “DATE & TIME”. . . 2 0 Tap 3 or 2 to scroll the screen. Tap “CLOCK SETTING”. 5 Set the date and time. . . 4 0 0 When the year, month, day, hour, or minute item is tapped, “3” and “2” will be displayed. Tap 3 or 2 to adjust the year, month, day, hour, and minute. 6 After setting the date and time, tap “SET”. 7 Select the region where you live and tap “SAVE”.
Getting Started Changing the Display Language The language on the display can be changed. Tap “MENU”. 2 Tap “SETUP”. 3 Tap “LANGUAGE”. When holding this unit, keep your elbows close to your sides to prevent camera shake. . . . 1 Holding this Unit 0 Hold the LCD monitor with your left hand and adjust the angle accordingly. Holding the LCD monitor with your left hand helps to stabilize the camera for recording. . Caution : 0 Tap to the desired language.
Getting Started Tripod Mounting This unit can be mounted on a tripod (or monopod). This is useful for preventing camera shake and recording from the fixed position. Using this Unit Overseas The shape of the power outlet varies according to countries and regions. To charge the battery pack, you need a converter plug that matches the shape of the outlet. “Charging the Battery Pack Overseas” (A p.
Getting Started Setting the Clock to Local Time when Traveling Setting Daylight Saving Time Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “DATE & TIME”. Restore the region settings after you returned from the trip. When “ON” is selected in “DST SETTING” of “DATE & TIME”, the time is set 1 hour ahead. Tap “MENU”. 2 Tap “SETUP”. 3 Tap “DATE & TIME”. 1 Tap “MENU”. 2 Tap “SETUP”. 3 Tap “DATE & TIME”. . . . . . 1 0 .
Getting Started Before Using Underwater or under Low Temperature Cautions on Using Underwater Maintenance after Use After using underwater or in dusty places, rinse the camera with water immediately and dry it completely. 1 Rinse with clean water. Soak the camera in a container filled with enough water to immerse the camera completely, and rinse it gently. Please take note of the followings when using this unit near water or underwater. Ensure that the cover is closed tightly.
Getting Started Optional Accessories Product Name Description HDMI Mini Cable 0 VX-HD310 0 VX-HD315 0 AV Cable 0 QAM1322-001 0 Connects to TV, DVD recorder, VCR, etc. “Connecting via the AV Connector” (A p. 55) “Dubbing Files to a Disc by Connecting to a DVD Recorder” (A p. 62) “Dubbing Files to a VHS Tape by Connecting to a VCR” (A p. 63) 0 Allows viewing in high picture quality when connected to a TV. Transmits video, audio, and control signals between devices.
Recording Taking Videos in Auto Mode Indications for Video Recording You can record without worrying about the setting details by using the Intelligent Auto mode. Settings such as exposure and focus will be adjusted automatically to suit the shooting conditions. You can record without worrying about the setting details by using the P Intelligent Auto mode. Settings such as exposure and focus will be adjusted automatically to suit the shooting conditions.
Recording o Scenes of Intelligent Auto Description g Captures one’s skin beautifully. V Allows people to be captured naturally. f Record a group of people with the most suitable settings. S Records while focusing on a near object. a Focuses at a far distance and captures a sharp image with vivid colors. Z Records in dark places with minimal noise in the overall image. T Allows night scenes to be captured accurately with minimal noise in the overall image.
Recording Using the Silent Mode When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance. 0 T appears when “SILENT MODE” is set to “ON”. 0 To mute only the operating sound, set “OPERATION SOUND” in the menu to “OFF” instead of using the silent mode. o Operating procedure 0 A Tap “MENU”. The top menu appears. B Tap “SILENT”.
Recording Taking Still Images in Auto Mode Indications During Still Image Recording You can record without worrying about the setting details by using the P Intelligent Auto mode. Open the LCD monitor. . 1 0 Some displays disappear after approximately 3 seconds. Use the n button to change the displays. Description . Display Icon 0 0 Check if the recording mode is P Intelligent Auto. . 2 Check if the recording mode is B.
Recording o Scenes of Intelligent Auto Description g Captures one’s skin beautifully. V Allows people to be captured naturally. f Record a group of people with the most suitable settings. S Records while focusing on a near object. a Focuses at a far distance and captures a sharp image with vivid colors. Z Records in dark places with minimal noise in the overall image. T Allows night scenes to be captured accurately with minimal noise in the overall image.
Recording Using the Silent Mode When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance. 0 T appears when “SILENT MODE” is set to “ON”. 0 To mute only the operating sound, set “OPERATION SOUND” in the menu to “OFF” instead of using the silent mode. “ OPERATION SOUND ” (A p. 90) Zooming The angle of view can be adjusted using zoom. Use the W end (wide angle end) to shoot a wider field of view.
Recording Manual Recording You can adjust settings, such as brightness, by using the manual mode. Manual recording can be set for both video and still image modes. Open the LCD monitor. . 1 0 For details on the various manual settings, refer to “Manual Recording Menu”. Manual Recording Menu The following items can be set. Name FOCUS 0 BRIGHTNESS ADJUST 0 BACKLIGHT COMP. Corrects the image when the subject appears dark due to backlight. 0 Use this when shooting against the light.
Recording Adjusting Focus Manually (FOCUS) 6 Adjust the focus. Set this when the focus is not clear in Intelligent Auto or when manual focusing is desired. Select the Manual recording mode. . 1 0 . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. 7 Tap “SET” to confirm. . 0 Tap E to focus on a distant subject. If E appears blinking, focus cannot be set any further.
Recording Adjusting Brightness 5 Tap “MANUAL”. 6 Adjust the brightness value. You can adjust the brightness to your preferred level. Select the Manual recording mode. . . 1 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. . 0 . 0 0 0 Tap “SET” to confirm. Tap “MENU”. . . 2 7 Compensation range: -2.0 to +2.0 Tap 3 to increase the brightness. Tap 2 to decrease the brightness.
Recording Setting Backlight Compensation 5 Tap “ON” or “ADVANCE”. You can correct the image when the subject appears too dark due to backlight. Select the Manual recording mode. . 1 . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. 0 Setting Details OFF Backlight compensation is disabled. ON Backlight compensation is enabled.
Recording Setting White Balance 5 Select the white balance setting. You can set the color tone to suit the light source. Select the Manual recording mode. . 1 0 . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. Setting 2 Tap “MENU”. Details n AUTO Adjusts automatically to the natural colors. l MWB Use this when the problem of unnatural colors is not resolved.
Recording Taking Close-up Shots (TELE MACRO) 4 Tap “TELE MACRO”. . . You can take close-up shots of an object using the tele macro function. *The image is only an impression. 1 0 0 Select the Manual recording mode. Tap “ON”. . 5 Tap L to exit the menu. Tap J to return to the previous screen. If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. . 0 0 After setting, the tele macro icon o appears.
Recording Shooting under Water Locking the Screen Perform the following settings to shoot underwater. 1 Tap “MENU”. Setting the White Balance to Underwater Mode Corrects the color when shooting underwater to record more natural images. Select from the following two settings depending on the color of the water at the shooting location. 1 . Tap “MENU”. 0 The top menu appears. Tap “RECORD SETTING”. 3 Tap 1 on the lower right of the screen. 4 Tap “SCREEN LOCK”. . 2 0 2 The top menu appears.
Recording o To cancel “SCREEN LOCK” Tap the L button. Recording with Effects You can add and record various effects to videos or still images. Once setting is done, you can easily record images that are suitable for each image. Type of Effect Captures film-like monochrome images by increasing the contrast of mid-level brightness and emphasizing the rough grainy feel on the image. “Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME)” (A p.
Recording Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME) You can record images with a grainy black and white photo feel. *The image is only an impression. Open the LCD monitor. . 1 0 0 Tap “MENU”. . 2 Set the recording mode to either A video or B still image. To switch the mode between video and still image, tap A or B on the recording screen to display the mode switching screen. Tap A or B to switch the mode to video or still image respectively. 0 The top menu appears.
Recording Recording Food Images (FOOD) You can capture images of the food to make the food look appetizing. *The image is only an impression. Start recording. 0 To cancel the setting, repeat the procedure from the beginning and tap “OFF” in Step 5. Open the LCD monitor. . 1 6 0 0 Tap “MENU”. . 2 Set the recording mode to either A video or B still image. To switch the mode between video and still image, tap A or B on the recording screen to display the mode switching screen.
Recording Recording Images of a Baby (BABY) You can capture soft images by enhancing the clarity and brightness of skin color. This effect is suitable for capturing images of a baby. *The image is only an impression. Open the LCD monitor. . 1 0 0 Tap “MENU”. . 2 Set the recording mode to either A video or B still image. To switch the mode between video and still image, tap A or B on the recording screen to display the mode switching screen.
Recording Capturing Subjects Clearly (TOUCH PRIORITY AE/AF) 5 Tap the desired setting. “TOUCH PRIORITY AE/AF” is a function that adjusts focus and brightness based on a tapped position. This function is available for both videos and still images. Open the LCD monitor. . . 1 . 0 0 0 Tap “MENU”. 0 0 0 Setting Details OFF Deactivates the function. FACE TRACKING e appears on the screen.
Recording Memo : 0 0 0 0 0 0 When “TOUCH PRIORITY AE/AF” is set, “FOCUS” will be set to “AUTO” automatically. Tap the selected position (face/color/area) again to cancel the setting. (Setting remains for registered faces.) Tap on an unselected position (face/color/area) to reset. If the camera loses track of a subject, tap the subject again. Settings are canceled when zoom operation is performed.
Recording Recording at Intervals (TIME-LAPSE RECORDING) 5 Tap to select a recording interval (1 to 80 seconds). This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval. This is useful for making observations such as the opening of a flower bud. Open the LCD monitor. . 1 0 0 0 Start recording. . . 6 The greater the number of seconds, the longer the recording interval. Tap L to exit the menu.
Recording 80SEC INTERVAL Takes a frame at 80-second intervals. Recorded videos will be played back at 2 400 times speed. Caution : 0 0 0 0 0 During the time-lapse recording, video quality is set to XP mode. Audio cannot be recorded during time-lapse recording. When recording is stopped with the recorded time less than “0:00:00:17”, the video will not be saved. Zooming, simultaneous still image recording, and image stabilizer are not available in time-lapse recording.
Recording 4 Tap “SELF-TIMER”. Recording Videos with Date and Time You can record videos together with the date and time. Set this when you want to save the file with date and time display. (The date and time cannot be deleted after recording.) Open the LCD monitor. . 1 0 0 0 Tap “2SEC” or “10SEC”. . 5 If the icon is not displayed on the screen, tap “1” to scroll the screen. Tap L to exit the menu. Tap J to return to the previous screen. . 0 0 6 Take a still image.
Recording 5 Select the type of clock with 0 or 1, and tap “SET”. Checking the Remaining Recording Time Display the remaining battery power and the remaining recording time. Memo : 0 . 0 0 0 0 6 When “SET” is tapped, the precaution for date/time recording appears. Tap L to exit the menu. 1 The remaining battery power and the remaining recording time are estimates. The remaining recording time is displayed only during video mode.
Recording Approximate Video Recording Time Picture quality SDHC/SDXC card 4GB 8GB 16GB 32GB 64GB 128GB UXP 20 m 40 m 1 h 20 m 2 h 40 m 5 h 40 m 11 h 30 m XP 30 m 1h 1 h 50 m 3 h 50 m 8 h 10 m 16 h 20 m EP 1 h 40 m 3 h 30 m 7h 14 h 28 h 50 m 57 h 50 m 0 The recordable time is only a guide. The actual recording time may be longer or shorter than the time indicated above.
Playback Playing Back Videos Caution : The followings are the types of playback that can be performed by this unit. Item Description Normal Playback Plays back the recorded videos. DIGEST PLAYBACK From the recorded video, scenes with a smile detected and scenes with a person whose face is registered are extracted and pieced together for a digest playback. When “AUTO” is selected, recorded video is digested in the pre-set length of time.
Playback Normal Playback Plays back the recorded videos. Open the LCD monitor. During Index Screen Display . 1 Operation Buttons for Video Playback . Display 0 0 Tap M to select the playback mode. A Video/Still Image Mode A/B Switches between video and still image modes. B Date Moves to the previous/next date C > Displays the next index screen (thumbnail display) 0 You can perform the same operation with the zoom lever.
Playback During Video Playback d MENU Displays the menu screen Memo : Tap or drag on the operation area of the touch screen. The recording date and time can be displayed on the screen during playback. (A p. 86) 0 0 Adjusting the Volume of Videos . You can use the zoom/volume lever to control the volume. When this unit is not operated, the operation buttons on the touch screen disappear automatically. Tap on the screen to display the operation buttons again.
Playback Checking the Recording Date and Other Information You can see the recording information of the recorded videos. Open the LCD monitor. . . 1 0 Tap A or B to select the video or still image mode. Tap M to select the playback mode. 3 Tap on the file to start playback. 4 Tap “MENU”. 5 Tap “INFO.”. . . . . 2 0 Tap L to exit the menu. You can display the recording date and duration of the selected file.
Playback DIGEST PLAYBACK You can play back a digest of recorded videos (Digest Playback). This is useful for checking the content of videos quickly. Open the LCD monitor. . 1 0 0 0 0 Select the Digest Playback time . 7 After selecting a date, tap “NEXT”. When “ALL” is tapped, Digest Playback will be performed for all the dates. Tap L to exit the menu. Tap J to return to the previous screen. 0 0 Tap M to select the playback mode. . 2 Check if the recording mode is A.
Playback PLAYBACK PLAYLIST Plays back the playlists registered in Digest Playback. Open the LCD monitor. . 1 0 Playback of the playlist starts. “Operation Buttons for Video Playback” (A p. 45) 0 . 0 Tapping u during playback brings you back to the index screen of Playback Playlist. Playlists with a O (Digest Playback) icon are the playlists created during Digest Playback. Check if the recording mode is A.
Playback PLAYBACK OTHER FILE 6 Tap on the file to start playback. The management information of a video may be damaged if recording is not performed correctly, such as turning off the power in the middle of recording. You can perform the following operations to play back the videos with defective management information. Open the LCD monitor. . 1 “Operation Buttons for Video Playback” (A p. 45) 0 Tap “L” to return to the usual index screen. Memo : 0 . 0 0 0 Check if the recording mode is A.
Playback Playing Back Still Images You can select and play back the recorded still images from an index screen (thumbnail display). During Index Screen Display Open the LCD monitor. . 1 Operation Buttons for Still Image Playback 0 Still images that are recorded continuously in high-speed or mediumspeed will be grouped together. Only the first recorded file (still image) is shown and the group is displayed with a green frame. Display . 0 0 Tap M to select the playback mode.
Playback Slideshow Playback During Still Image Playback 0 When this unit is not operated, the operation buttons on the touch screen disappear automatically. Tap on the screen to display the operation buttons again. Display Description A Video/Still Image Mode A/B Switches between video and still image modes. B h Returns to the previous still image 0 You can perform the same operation with the zoom lever. C d/e Starts/pauses slideshow 0 The same operation can be performed with the SET button.
Playback Connecting to and Viewing on TV You can connect this unit to a TV for playback. The image quality on TV varies with the type of TV and the connecting cable. Select the connector that best suits your TV. 0 Refer also to the instruction manual of the TV in use. “Connecting via the HDMI Mini Connector” (A p. 53) “Connecting via the AV Connector” (A p. 55) Connecting via the HDMI Mini Connector If you are using an HDTV, you can play back in HD quality by connecting to the HDMI mini connector.
Playback Memo : Change the settings in “HDMI OUTPUT” according to the connection. “ HDMI OUTPUT ” (A p. 92) 0 0 0 When connected to the TV via the HDMI mini cable, images and sounds may not be output properly depending on the TV connected. In such cases, perform the following operations. 1) Disconnect the HDMI mini cable and connect it again. 2) Turn off and on this unit again. For questions about the TV or method of connection, contact your TV's manufacturer.
Playback Connecting via the AV Connector To purchase, consult your nearest JVC service center. To playback videos on TV, connect the AV cable (optional: QAM1322-001) to the AV terminal of this unit. 0 Refer also to the instruction manual of the TV in use. Connect to a TV. . 1 When using the optional AV cable, attach the core filter provided with this unit first. “Attaching the Core Filter (for Optional AV Cable)” (A p. 7) . 0 Connect the adapter cable and AC adapter to this unit.
Editing Deleting Unwanted Files Delete unwanted videos and still images when the space in the recording media is running out. Doing so frees up more space in the recording media. “Deleting the Currently Displayed File” (A p. 56) “Deleting Selected Files” (A p. 56) Memo : Deleting Selected Files Deletes the selected files. Caution : 0 1 Deleted files cannot be restored. Open the LCD monitor. Deleted files cannot be restored. When files in a playlist are deleted, the playlist changes.
Editing 5 Tap “SET”. Protecting Files Prevent important videos/still images from being deleted accidently by protecting them. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 57) “Protecting/Releasing Protection of Selected Files” (A p. 58) Caution : When the recording media is formatted, even the protected files will be deleted. . 0 0 Tap “EXECUTE” to confirm the deletion.
Editing Protecting/Releasing Protection of Selected Files 6 Tap on the files to protect or release protection of. Protects or releases protection of the selected files. Open the LCD monitor. . . 1 0 0 7 P appears on the selected files. To remove P from a file, tap on the file again. 0 I and P are displayed on the files that are already protected. To release protection of a file, tap on the file such that P is removed. 0 0 Tap “SEL ALL” to select all files.
Editing Capturing a Still Image in the Video During Playback You can capture still images of the scenes you like in the recorded videos. 1 Open the LCD monitor. Capturing a Required Part in the Video (TRIMMING) Select the required part of a video and save it as a new video file. The original video remains in its existing location. 0 Open the LCD monitor. . 1 0 0 Tap M to select the playback mode. Check if the recording mode is A.
Editing 6 Tap the video to edit. Deleting Playlists Delete the playlists that you have created. Open the LCD monitor. . 1 7 . Tap e to pause playback at the desired start point, then tap “A”. . 0 0 0 0 8 When “A” is tapped, the start point is set. After setting the start point, tap d to continue playback. Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video.
Copying 6 Dubbing Files to a Disc by Connecting to a Blu-ray Recorder Tap R. You can dub videos in the high definition quality by connecting an AVCHDcompliant Blu-ray recorder to this unit via a USB cable. For details on creating the disc, refer to the instruction manual of your Blu-ray recorder. 0 This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first. Open the terminal cover. 2 Connect to a Blu-ray recorder. .
Copying Dubbing Files to a Disc by Connecting to a DVD Recorder You can dub videos in standard quality by connecting to a DVD recorder. 0 Refer also to the instruction manuals of the TV and DVD recorder. 1 Open the terminal cover. 2 Connect to a DVD recorder. AV cable (Optional: QAM1322-001) Before using the cable, attach the core filter provided with this unit. “Attaching the Core Filter (for Optional AV Cable)” (A p.
Copying Dubbing Files to a VHS Tape by Connecting to a VCR You can dub videos in standard quality by connecting to a VCR. 0 Refer also to the instruction manuals of the TV and VCR. 1 Open the terminal cover. 2 Connect to a VCR/DVD recorder. AV cable (Optional: QAM1322-001) Before using the cable, attach the core filter provided with this unit. “Attaching the Core Filter (for Optional AV Cable)” (A p. 7) Wiring specifications (for video/audio) of the 4-pole mini plug are described in the following.
Copying Copying to Windows PC You can copy files to a computer using the provided software. Discs can also be created using the computer’s DVD or Blu-ray drive. If the provided software is not installed, this unit will be recognized as an external storage when connected. Memo : To record to discs, a recordable DVD or Blu-ray drive is required for the computer in use.
. Copying 0 If a “Computer” icon is shown on desktop, right-click the icon and select “Properties” in the menu to display your computer information. Windows Vista/Windows 7 Click the start button. 2 Right-click Computer. 3 Click “Properties”. 4 Check the items with the table below. . . . .
Copying Windows 8 Windows Vista/Windows 7 OS Windows 8 64-bit Windows 8 Pro (Pre-installed versions, desktop mode only) Windows Vista 32/64-bit Home Basic or Home Premium (Pre-installed versions only) Service Pack 2 Windows 7 32/64-bit Home Premium (Pre-installed versions only) Service Pack 1 CPU Intel Core Duo, CPU 1.66 GHz or higher (Intel Core 2 Duo, CPU 2.13 GHz or higher recommended) Intel Core Duo, CPU 1.66 GHz or higher (Intel Core 2 Duo, CPU 2.
Copying Installing the Provided Software (Built-in) You can display the recorded images in calendar format and perform editing using the provided software. 0 This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first. Preparations . Connect this unit to a computer with a USB cable. B Click “Computer” or “PC” in the “Windows System Tool” menu. o Windows 8/Windows 8.1 1 Open the terminal cover. 2 Connect to your PC using the provided USB cable.
. Copying 0 . 9 Click “Quit”. 6 “Everio Software Setup” appears on the computer. Operations are to be performed on the computer after the screen switches. Perform the following operations on your computer. . A Click “Open folder to view files” on the auto play dialog box, and then double-click “install.exe”. B Click “Yes” on the User Account Control screen. *Windows 7 0 Installation is complete, and two icons are created on the desktop. 10 Remove this unit from your PC.
Copying Backing Up All Files Before making backup, make sure that enough free space is left in the computer's hard disk (HDD). Backup will not start if there is not enough free space. 0 This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first. 1 Open the terminal cover. 2 Connect to your PC using the provided USB cable. Before connecting the cable, close the LCD monitor to turn off this unit. . 0 Start backup. . 7 Open the LCD monitor. .
Copying Disconnecting this Unit from Computer Organizing Files After backing up your files, organize them by adding labels such as “Family Trip” or “Athletic Meet”. This is useful not only for creating discs, but for viewing the files too. 1 Double-click on the Everio MediaBrowser 4 icon. The provided software starts up. . 0 Click “Safely Remove Hardware and Eject Media”. 2 Click all “JVCCAM~”. 3 Disconnect the USB cable and close the LCD monitor.
Copying Recording Videos to Discs Copy the files that are arranged using the user list to discs. Insert a new disc into the PC’s recordable DVD drive. 2 Select the desired user list. 3 Select the disc type. 4 Select the files to copy to disc in order. . 1 Identifying Video or Still Image： 0 . . 0 You can select files using the “SELECT” menu on the top right of the screen. Check the video/still image icon on the top right corner of the thumbnail.
Copying Memo : The following types of discs can be used on the provided software Everio MediaBrowser 4. DVD-R DVD-R DL DVD-RW DVD+R DVD+R DL DVD+RW 0 The following formats are supported by the provided software Everio MediaBrowser 4. AVCHD DVD-Video* * To create DVD-Video discs using the provided software, it is necessary to install the additional software (software for creating DVD-Video). For details, refer to the Pixela homepage. http://www.pixela.co.
Copying Backing Up Files Without Using Provided Software 6 Copy the files to a computer using the following method. 0 This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first. 1 Open the terminal cover. 2 Connect to your PC using the provided USB cable. 0 Before connecting the cable, close the LCD monitor to turn off this unit.
Copying List of Files and Folders . Folders and files are created in the SD card as shown below. They are created only when necessary. Caution : 0 When the camera and PC are connected by an USB cable, recorded media are read-only.
Copying Copying to Mac Computer 6 0 Copy the files to a Mac computer using the following method. Caution : 0 0 This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first. 1 Open the terminal cover. 2 Connect to your PC using the provided USB cable. 0 Load image file to iPhoto. 0 7 Edit the video using iMovie. 0 0 0 Before connecting the cable, close the LCD monitor to turn off this unit.
Settings Menu Operating the Menu You can configure various settings using the menu. 1 Tap “MENU”. . There are two types of menus in this unit. 0 TOP MENU: Menu that contains all the items specific to the video recording, still image recording, video playback, and still image playback modes respectively. 0 SHORTCUT MENU: Menu that contains the recommended functions for video/still image recording. Operating the Top Menu 0 0 The top menu appears. The menu differs according to the mode in use.
Settings Menu . Operating the Shortcut Menu You can configure various settings of the recommended functions in the video/still image recording mode using the shortcut menu. Tap “MENU”. 2 Tap the shortcut icon (F). . . 1 0 3 The shortcut menu appears. Tap the desired menu and setting. . . 0 “BACKLIGHT COMP. (manual mode only) ” can be set. 0 “BACKLIGHT COMP. (manual mode only) ” can be set.
Settings Menu . Shortcut Menu (video/still image) BACKLIGHT COMP. Corrects the image when the subject appears dark due to backlight. “Setting Backlight Compensation” (A p. 29) *Displayed only in the manual recording mode.
Settings Menu . RECORD SETTING Menu (video) FOCUS Focus can be adjusted manually. “Adjusting Focus Manually (FOCUS)” (A p. 27) *Displayed only in the manual recording mode. BRIGHTNESS ADJUST Adjusts the overall brightness of the screen. “Adjusting Brightness” (A p. 28) *Displayed only in the manual recording mode. BACKLIGHT COMP. Corrects the image when the subject appears dark due to backlight. “Setting Backlight Compensation” (A p. 29) *Displayed only in the manual recording mode.
Settings Menu Setting Details RECORD ONE SHOT Records one still image. CONTINUOUS SHOOTING Records still images continuously while the A button on the LCD screen is tapped. Memo : 0 0 0 The size of the still image that is captured in the video mode is 1,920 x 1,080. Some SD cards may not support continuous shooting. The continuous shooting speed will drop if this function is used repeatedly. VIDEO QUALITY Sets the video quality. Setting Details UXP Enables recording in the best picture quality.
Settings Menu Setting Details +1 Increases the microphone input level. 0 The microphone input level is not changed. -1 Decreases the microphone input level. K2 TECHNOLOGY Reduces the degradation of sound quality caused by digital signal processing, and records a sound quality close to the original. Setting Details OFF Deactivates K2 TECHNOLOGY. ON Activates K2 TECHNOLOGY. SCREEN LOCK When shooting under water, lock the touch screen to prevent operation errors.
Settings Menu . SPECIAL RECORDING Menu (video) TIME-LAPSE RECORDING This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval. This is useful for making observations such as the opening of a flower bud. “Recording at Intervals (TIME-LAPSE RECORDING)” (A p. 39) RECORDING EFFECT You can add and record various effects to the images.
Settings Menu . RECORD SETTING Menu (still image) FOCUS Focus can be adjusted manually. “Adjusting Focus Manually (FOCUS)” (A p. 27) *Displayed only in the manual recording mode. BRIGHTNESS ADJUST Adjusts the overall brightness of the screen. “Adjusting Brightness” (A p. 28) *Displayed only in the manual recording mode. BACKLIGHT COMP. Corrects the image when the subject appears dark due to backlight. “Setting Backlight Compensation” (A p. 29) *Displayed only in the manual recording mode.
Settings Menu 0 The continuous shooting speed will drop if this function is used repeatedly. IMAGE SIZE Sets the image size (number of pixels) for still images. Setting Details 1920X1080(2M) Takes still images with aspect ratio 16:9. 0 The sides of still images recorded in 16:9 aspect ratio may be cut off when printed. 1440X1080(1.5M) 640X480(0.3M) Takes still images with aspect ratio 4:3.
Settings Menu . SPECIAL RECORDING Menu (still image) RECORDING EFFECT You can add and record various effects to the images. Once setting is done, you can easily record images that are suitable for each image. o GRAINY MONOCHROME You can record images with a grainy black and white photo feel. “Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME)” (A p. 34) o FOOD You can capture images of the food to make the food look appetizing. “Recording Food Images (FOOD)” (A p.
Settings Menu . PLAYBACK SETTING Menu (video) DISPLAY DATE/TIME Sets whether to display the recording date and time during video playback. Setting Details OFF Does not display the date and time during playback. ON Displays the date and time during playback. DIGEST PLAYBACK Plays back a digest of the recorded videos. “ DIGEST PLAYBACK ” (A p. 48) PLAYBACK PLAYLIST Plays back the playlists registered in Digest Playback. “ PLAYBACK PLAYLIST ” (A p.
Settings Menu . EDIT Menu (video) PROTECT/CANCEL Protects files from being deleted accidently. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 57) “Protecting/Releasing Protection of Selected Files” (A p. 58) TRIMMING Select the required part of a video and save it as a new video file. The original video remains in its existing location. “Capturing a Required Part in the Video (TRIMMING)” (A p.
Settings Menu . PLAYBACK SETTING Menu (still image) SLIDE SHOW EFFECTS Sets the transition effects in slideshow playback. Setting Details SLIDE Switches the screen by sliding in from right to left. BLINDS Switches the screen by dividing into vertical strips. CHECKERBOARD Switches the screen by changing through a checkered pattern. RANDOM Switches the screen with a random effect from SLIDE, “BLINDS”, and “CHECKERBOARD”.
Settings Menu . EDIT Menu (still image) PROTECT/CANCEL Protects files from being deleted accidently. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 57) “Protecting/Releasing Protection of Selected Files” (A p.
Settings Menu . SETUP (video/still image) Mobile User Guide . Displays the QR code to access the Mobile User Guide. 0 The portal site appears when the QR code has been read correctly. Select the model name of your camera to display its Mobile User Guide. Memo : 0 0 0 To read the QR code, a relevant application is required. Enter the URL in the internet browser manually if the QR code cannot be read. The Mobile User Guide is supported by Android devices and iPhone.
Settings Menu Setting Details OFF Turns off the operation sound. ON Turns on the operation sound. AUTO POWER OFF When no operation is made for 5 minutes, this function turns off this unit or sets this unit to standby mode when using the AC adapter in case you forgot to turn off the power. Setting Details OFF Power is not turned off even if this unit is not operated for 5 minutes. ON Turns off the power automatically if this unit is not operated for 5 minutes.
Settings Menu . CONNECTION SETTINGS (video/still image) DISPLAY ON TV Displays icons and date/time on a TV screen. Setting Details OFF Does not display icons and date/time on TV. ON Displays icons and date/time on TV. VIDEO OUTPUT Sets the aspect ratio (16:9 or 4:3) according to the connecting TV. Setting Details 4:3 Select this when connecting to a conventional TV (4:3). 16:9 Select this when connecting to a widescreen TV (16:9).
Settings Menu . MEDIA SETTINGS (video/still image) FORMAT SD CARD Deletes all files on the SD card. Setting Details FILE AVCHD video files: Deletes all files on the SD card. The file numbers are also reset. Other files: Deletes all files on the SD card. The folder and file numbers won’t be reset. (The folder and file numbers of newly recorded files will continue from the last number of the deleted files.) FILE + MANAGEMENT NO Deletes all files on the SD card.
Settings Menu USB CONNECTION MENU This menu appears when this unit is connected to a computer using an USB cable. PLAYBACK ON PC 0 Displays videos recorded by this unit by using the Everio MediaBrowser 4. “Installing the Provided Software (Built-in)” (A p. 67) 0 Saves videos recorded by this unit on your computer without using the provided software. “Backing Up Files Without Using Provided Software” (A p. 73) “Copying to Mac Computer” (A p.
Names of Parts Bottom Side D Speaker E Grip Belt Pass your hand through the grip belt to hold this unit firmly. “Grip Adjustment” (A p. 6) 0 . . Right Side A Terminal Cover Lock B Tripod Mounting Hole “Tripod Mounting” (A p.
Names of Parts Inside Terminal Cover . Top/Left/Rear Side A SD Card Slot . 0 A Stereo Microphone 0 Do not cover the microphone with your fingers during video recording. B LCD Monitor C CHARGE (Charging) Lamp 0 0 0 Lights up: Charging in progress Goes off: Charging completed/Beyond temperature range Blinks: Charging error or abnormal temperature D POWER/ACCESS (Power/Access) Lamp 0 Lights up/blinks during recording or playback. Do not remove the SD card or any connecting cables.
Names of Parts . LCD Monitor A LCD Monitor Turns the power on/off by opening and closing. Enables self-portraits to be taken by rotating the monitor. . 0 0 “Using the Touch Screen” (A p. 9) “Names of Buttons and Functions on the LCD Monitor” (A p. 10) Caution : 0 Do not press against the surface with force or subject it to strong impact. Doing so may damage or break the screen.
Indications on the LCD monitor Video Recording . . Common Recording Indications A TOUCH PRIORITY AE/AF “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 37) B Backlight Compensation “Setting Backlight Compensation” (A p. 29) C Tele Macro “Taking Close-up Shots (TELE MACRO)” (A p. 31) D WHITE BALANCE “Setting White Balance” (A p. 30) E Time “Clock Setting” (A p. 13) F Recording media G Battery Indicator “Checking the Remaining Recording Time” (A p.
Indications on the LCD monitor Video Playback . Still Image Recording . A Video Mode A Still Image Mode 0 Switches between video and still image modes. B Image Size “ IMAGE SIZE ” (A p. 84) C Self-Timer “Taking Group Shots (Self-timer)” (A p. 40) D Remaining Number of Shots “Checking the Remaining Recording Time” (A p. 43) E Focus F Recording in Progress 0 Switches between video and still image modes. B Video Quality “ VIDEO QUALITY ” (A p.
Troubleshooting . Still Image Playback A Still Image Mode 0 Switches between video and still image modes. B Folder Number C File Number D Date/Time 0 Displays the recording date and time. E Recording media F Battery Indicator “Checking the Remaining Recording Time” (A p. 42) G SILENT MODE “Using the Silent Mode” (A p. 22) H 1080p Output “ HDMI OUTPUT ” (A p.
Troubleshooting When the unit is not working properly Resetting this Unit 1 Open the terminal cover. 0 Remove the power cord and all connecting cables. 2 Close the LCD monitor to turn off this unit. 3 Press the Reset button gently using an object with pointed tip.
Troubleshooting Battery Pack Power supply Unable to charge the battery. Unable to turn on the power. When the battery pack is fully charged, the lamp does not light up. Be sure to charge using the supplied AC adapter. Malfunction in the unit that occurred due to the use of an AC adapter other than the one provided is not included in the warranty. Check the connection, then disconnect and reconnect the charging adapter cable. Charging cannot be performed under low or high temperature environments.
Troubleshooting Recording SD Card Recording cannot be performed. Cannot insert the SD card. Check the A / B button. “Top/Left/Rear Side” (A p. 96) Set to the recording mode by tapping the E button on the screen. Make sure not to insert the SD card in the wrong direction. “Inserting an SD Card” (A p. 7) Do not use a miniSD card or microSD card on this unit (even if the card is inserted in an adapter). It may cause malfunction. “Types of Usable SD Card” (A p. 8) Recording stops automatically.
Troubleshooting Playback Editing/Copying Sound or video is interrupted. Unable to delete file. Sometimes playback is interrupted at the connecting section between two scenes. This is not a malfunction. Files (videos/still images) that are protected cannot be deleted. Release protection before deleting the file. “Protecting Files” (A p. 57) There is no sound. When the Silent mode is used, operation sounds will not be output. Turn off the Silent mode. “Using the Silent Mode” (A p.
Troubleshooting Computer Screen/Image Unable to copy files to the computer’s HDD. The LCD monitor is difficult to see. If the provided software Everio MediaBrowser 4 is not installed, some functions may not work properly. “Installing the Provided Software (Built-in)” (A p. 67) Before making backup, make sure that enough free space is left in the computer's hard disk (HDD). The LCD monitor may be difficult to see if used in bright areas such as under direct sunlight.
Troubleshooting Other Problems The buttons on the touch screen do not work. Tap the buttons on the touch screen with your fingers. The buttons may not respond if you touch them with your fingernails or with gloves on. Disable “SCREEN LOCK”. You cannot operate the touch panel when “SCREEN LOCK” is enabled. “Locking the Screen” (A p. 32) Save the recorded data before requesting service. A Connect to computer using a USB cable. The “SELECT DEVICE” menu appears.
Troubleshooting Error Message? SET DATE/TIME! The clock is reset about one month after the battery is depleted. Therefore, “SET DATE/TIME!” will appear the next time the power is turned on. Set the clock again after charging the battery. “Clock Setting” (A p. 13) COMMUNICATION ERROR Reconnect the USB cable. Turn off and on the devices connected to this unit, and reset this unit. “Resetting this Unit” (A p. 101) FORMAT ERROR! Reset this unit. “Resetting this Unit” (A p.
Maintenance Perform regular maintenance of this unit to enable it to be used for a long time. Caution : 0 Be sure to detach the AC adapter and power plug before performing any maintenance. Camcorder 0 0 Wipe this unit with a dry, soft cloth to remove any dirt. When it is extremely dirty, soak the cloth in a solution of neutral detergent, wipe the body with it, and then use a clean cloth to remove the detergent. Caution : 0 0 0 Do not use solvents such as benzene, thinner, or alcohol.
Specifications Connectors Camera Details Item Power supply Using AC adapter: DC 5.2 V HDMI mini connector Power consumption 2.2 W (MONITOR BRIGHTNESS: 3 (standard)) 2.4 W (MONITOR BRIGHTNESS: 4 (brighter)) Rated Current Consumption: 1A HDMI output connector AV output connector Video output: 1.0 V (p-p), 75 Ω Audio output: 300 mV (rms), 1 KΩ Dimensions (mm) 60 x 59.5 x 122 (2-1/16" x 2-3/8" x 4-5/8") (W x H x D: excluding grip belt) USB connector Micro USB Type AB, USB 2.
Specifications Still Image AC Adapter (AC-V11U) Item Details Item Details Recording format JPEG standard Power supply AC 110 V to 240 V, 50 Hz/60 Hz Extension .JPG Output DC 5.2 V, 1 A Image Size (Recording pixel count) (16:9 aspect ratio) 1920 pixels x 1080 pixels (2M) (4:3 aspect ratio) 1440 pixels x 1080 pixels (1.5M) 640 pixels x 480 pixels (0.3M) “Approximate Number of Still Images (Unit: Number of Shots)” (A p.
Trademarks Trademarks 0 . 0 AVCHD and AVCHD logo are trademarks of Panasonic Corporation and Sony Corporation. HDMI (High-Definition Multimedia Interface) and HDMI logo are either registered trademarks or trademarks of HDMI Licensing, LLC in the United States and/or other countries. 0 0 0 0 0 0 0 0 0 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. SDXC logo is a trademark of SD-3C, LLC.
