User manual

NOTE
0
When the camera battery is fully charged, the estimated recording time is
approximately 2 hours 20 minutes (of actual recording at 4K).
0
Do not remove SD card when the POWER/ACCESS lamp is lighted. The
recorded data may become unreadable.
0
With [Auto Power Off] operation, the camera automatically turns off if no
operation is performed for 5 minutes, in order to conserve power. (The unit
enters into standby mode when the AC adapter is used.)
0
The angle of view may change when the image stabilizer is turned on or off.
0
When
recording underwater, the internal mechanical noise (such as zooming
sound) may be easily picked up and recorded. This is not a malfunction.
0
A recorded video file that exceeds 4 GB is divided and recorded into multiple
files. However, setting [4 GB Spanning] to [Off (SDXC)] allows recording up
to maximum 64 GB or 4 hours. (This setting is available only when using SDXC
card with [System] set to [4K] or [High-Speed].)
o
Capturing Still Images in Video Recording Mode
.
A
54min
---min
A
B
Lights up while
recording still
image
Tap the still image recording
button on the touch screen.
Check if the remaining recording
time for slot A or slot B is displayed.
Check if a recordable SD card is
inserted.
o
Capturing a Scene from the Video as Still Image
A
Pause the playback at the preferred position.
B
Tap the B button.
* The captured still images are recorded on the selected SD card.
NOTE
0
There is no still image recording mode.
0
This unit may turn off to protect the circuit if its temperature is too high.
EN 13