User Manual

Network
For configuring the network.
When using the network function, select “On”.
Setting Description
On Uses a network device.
Off Does not use a network device.
Caution :
0
Network cannot be selected in the following cases.
–
When “System” is set to “High-Speed”
– When live streaming is in progress
Firmware Update
Updates the functions of this unit to the latest version.
For more details, please refer to the website below.
http://www3.jvckenwood.com/english/support/index.html
(When no program to update the software of this unit is available, nothing will be provided on the homepage.)
Caution :
0
This item cannot be selected during recording.
System Information
Displays the version information and open source software licenses.
Record Set Menu
Record Format
For configuring settings related to the recording format.
Go to “Record Format Menu” (A p. 119
) .
Rec Mode
For configuring the recording mode.
Setting Description
Normal When recording stops, the image, audio and accompanying data from the start till the end of the recording are recorded as
a single scene.
Pre Rec “Pre Rec Time” can be used to specify the number of seconds for video and audio to be recorded before the actual recording
starts.
“Pre Rec” (A p. 43)
Scene Continuous This function enables several rounds of recordings (from the time when recording starts to the time when it is stopped) to
be consolidated into a single scene.
“Scene Continuous” (A p. 44
)
Time-Lapse Rec This function enables the changes of a scene that occur slowly over a long period of time to be played back within a short
time by recording the number of frames configured in “Rec Frames” over the time interval configured in “Rec Interval”.
“Time-lapse Recording (Time-Lapse Rec)” (A p. 41
)
Caution :
0
Unavailable when “System” is set to “High-Speed”.
0
When this item is set to “Pre Rec”, “Scene Continuous” or “Time-Lapse Rec”, turning off the power will restore it to “Normal”.
Settings Menu
117