User Manual

Setting Aperture
You can adjust the aperture to change the area of focus.
1
Select the Manual recording mode.
.
MENUREC
PLAY
SLOT
STBY
00 : 00 : 00 . 00
2018 - 01 - 01
02 : 23 : 01
TC
0
If
the camera is in the n mode, tap n to display the mode selection
screen.
Tap H to switch the recording mode to Manual.
.
2
Tap “MENU”.
.
MENUREC
PLAY
SLOT
STBY
00 : 00 : 00 . 00
2018 - 01 - 01
02 : 23 : 01
TC
3
Select “Camera Process” with 3 or 2, followed by tapping “SET”.
.
Camera Process...
4
Select “Aperture” with 3 or 2, followed by tapping “SET”.
.
AutoAperture
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Select “Manual” with 3 or 2, followed by tapping “SET”.
.
オート
オ
ー
ト
Auto
Manual
6
Adjust the aperture.
.
MENUREC
PLAY
SET
STBY
00 : 00 : 00 . 00
2018 - 01 - 01
02 : 23 : 01
TC
0
Aperture can be set to a value between F1.8 and F4.0.
0
If you want the background to be in focus as well (larger aperture
value), tap 2.
0
If you want the background to appear blurry (smaller aperture value),
tap 3.
0
Pressing and holding down the key allows focus to be adjusted
continuously.
7
Tap “SET” to confirm.
.
MENUREC
PLAY
SLOT
STBY
00 : 00 : 00 . 00
2018 - 01 - 01
02 : 23 : 01
TC
Memo :
0
When
zooming to the Tele end, the aperture value is set according to the
zoom and indicated in yellow. The aperture value in this case will be
different from the preset value.
0
The larger the aperture value, the darker the subject may appear.
Caution :
0
Aperture cannot be selected in the following cases.
- During Auto recording
- When “Lolux” is set to “On”
Recording
28