VIDEO CASSETTE RECORDER HR-DD750U CABLE/ DBS TV MBR SET A/B POWER TV/VCR ENTER/OSD DISPLAY 1 2 3 2 4 5 6 DBS DAILY(M-F) WEEKLY 8 9 7 AUX C.
EN Dear Customer, Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EN IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing. ATTENTION: 3 5. Ventilation Slots and openings in the cabinet are provided for ventilation.
EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket, or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. • Use a mounting accessory recommended by the manufacturer and follow the manufacturer’s instructions for any mounting of the product.
CONTENTS I NSTALLING YOUR NEW VCR I NITIAL SETTINGS EN 6 Basic Connections .................................. 6 8 Plug & Play .................................................. 8 Language ................................................... 10 Clock .......................................................... 11 Preparation .............................................................. 11 Semi-Auto ................................................................12 Manual ................................
EN INSTALLING YOUR NEW VCR Basic Connections ANTENNA IN (Antenna or Cable input) Antenna or Cable Coaxial Cable Flat Feeder Matching Transformer (not supplied) AC Power Cord OUT IN ANTENNA IN VIDEO (MONO) L AUDIO REMOTE AV PAUSE COMPULINK R VHF/UHF TV CABLE BOX OUT CH3 CH4 Back of VCR TV OUT AC Outlet TV RF Cable (supplied) Audio/Video Cable (supplied) 75 ohm terminal Back of VCR CH3 CH4
EN 1 2 3 4 5 CHECK CONTENTS Make sure the package contains all of the accessories listed in “SPECIFICATIONS” (Z pg. 63). SITUATE VCR Place the VCR on a stable, horizontal surface. CONNECT VCR TO TV The connection method you use depends on the type of TV you have. RF Connection ● To Connect To A TV With NO AV Input Terminals . . . a– Disconnect the TV antenna from the TV. b– Connect the TV antenna cable to the ANTENNA IN jack on the rear of the VCR.
EN INITIAL SETTINGS Plug & Play Auto Clock Set/Auto Tuner Set ATTENTION If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually. ( Z pg.11 – 15) The Plug & Play function sets the clock and tuner channels automatically when power is first connected to the VCR. The antenna cable must be connected for the Plug & Play function. The time and date can be set automatically from clock setting data that is transmitted by one of the regular TV broadcast channels.
EN 9 INFORMATION ● If "AUTO CLOCK" is set to "ON" at the Clock Set screen on page 12, the clock will be adjusted automatically by the host channel every hour on the hour (except for 11:00 PM, midnight, 1:00 AM and 2:00 AM) by the incoming PBS channel clock setting data. (This automatic clock adjustment can only be performed when the VCR’s power is turned off. The clock will be adjusted on the hour based on the time displayed on the VCR, not on the actual real time.
EN INITIAL SETTINGS (cont.) This VCR offers you the choice to view on-screen messages in English, Spanish or French (not including messages superimposed on the TV picture). Select the desired language using this procedure. The default setting is "ENGLISH". Language 1 M EN U POWER Turn on the TV and select the VCR channel 3 or 4 (or AV mode). 2 CH 5 ∞ OK 3 TURN ON THE VCR Press POWER. ACCESS MAIN MENU SCREEN Press MENU.
EN Perform clock setting only if the clock has not been set correctly by the Plug & Play function or you use a cable box. Access the Clock Set screen to perform the Semi-Auto or Manual clock setting procedure. Each procedure starts from step 5. If you use a cable box, set the clock manually. (Z pg. 13) Clock Turn on the TV and select the VCR channel 3 or 4 (or AV mode). Preparation 1 M EN U POWER 11 OK CH 2 3 TURN ON THE VCR Press POWER. ACCESS MAIN MENU SCREEN Press MENU.
INITIAL SETTINGS (cont.) Semi-Auto K You can change the Host Channel/D.S.T. /Time Zone setting manually. O MENU 12 EN CH At the Clock Set screen, CLOCK SET press OK or repeatedly TIME DATE YEAR to move the highlight bar 1:00PM 12/24 98 THU to "AUTO CLOCK" and AUTO CLOCK : ON press CH 5∞ or %fi to set HOST CH : AUTO (CATV) D.S.T. : AUTO to "ON". TIME ZONE : AUTO a– To select the Host PRESS (5,∞), THEN (OK) Channel — go to step 6 PRESS (MENU) TO END b– To select the D.S.T.
EN You can select the time zone automatically or manually. Move the highlight bar to "TIME ZONE" by pressing OK or , then press CH 5∞ or %fi to select "AUTO" or the desired time zone. % 8 SELECT TIME ZONE Manual 5 ATLANTIC EASTERN CENTRAL MOUNTAIN NOTE: Press MENU. IMPORTANT Turn the VCR off after performing the Semi-Auto Clock Set procedure. "Auto" will appear on the front display panel when the clock is being set. The current time will appear automatically when the clock is set.
EN INITIAL SETTINGS (cont.) Set Receivable Channels Tuner EN U POWER Turn on the TV and select the VCR channel 3 or 4 (or AV mode). 1 M CH Press POWER. ACCESS MAIN MENU SCREEN Press MENU. ACCESS TUNER SET SCREEN Move the highlight bar (arrow) to "TUNER SET" by pressing CH5∞ or % fi, then press OK or .
EN 15 O K MENU Add Or Delete A Channel CH 3 2 3 4 5 6 7 8 9 ACCESS TUNER SET SCREEN Move the highlight bar (arrow) to "TUNER SET" by pressing CH5∞ or % fi, then press OK or . ACCESS MANUAL CHANNEL SET SCREEN Move the highlight bar (arrow) to "MANUAL CHANNEL SET" by pressing CH5∞ or % fi, then press OK or . % 1 Press MENU.
EN INITIAL SETTINGS (cont.) This procedure is required if you receive your TV channels through a cable box (descrambler). The Controller allows the VCR to automatically switch the cable box channel during timer-recording. The Controller is effective for recording shows that have been programmed using VCR Plus+ (Z pg. 38) or Express Timer Programming (Z pg. 42). Cable Box Control Suggested Location Place the cable box on top of the VCR.
EN Set Cable Box Output Channel & Cable Box Brand 1 2 M EN U POWER Turn on the TV and select the VCR channel 3 or 4 (or AV mode). CH OK POWER 2 3 4 5 6 7 8 9 2 0 3 4 Select a channel other than channel 9 on your cable box. TURN ON THE VCR Press POWER. ACCESS MAIN MENU SCREEN Press MENU. ACCESS INITIAL SET SCREEN Press CH5∞ or %fi to move the highlight bar (arrow) to “INITIAL SET”, then press OK or .
EN M EN U INITIAL SETTINGS (cont.) 7 8 CH OK 1 2 3 2 NUMBER 4 5 6 7 8 9 0 1 ENTER CABLE BOX BRAND Press the appropriate NUMBER keys to enter the Cable Box Code from the CABLE BOX BRAND LIST shown below, then press OK.
EN DBS Receiver Control Suggested Location Place the DBS (Direct Broadcast Satellite) receiver on top of the VCR. Attach the VCR's Controller to the top of the VCR with the Controller’s transmitter pointed towards the DBS receiver's remote sensor. ATTENTION: The Controller can also control a cable box. If both a DBS receiver and a cable box are used, position the controller so its signal reaches the remote control sensors of both the DBS receiver and cable box.
EN INITIAL SETTINGS (cont.) EN U POWER Turn on the TV and select the VCR channel 3 or 4 (or AV mode). Set DBS Receiver Output Channel & DBS Receiver Brand M 1 2 CH OK POWER 2 3 4 5 6 7 8 9 2 0 4 4 TURN ON THE VCR Press POWER. ● Set the VCR to the channel (3 or 4 or F-1 or L-1) on which the signals from the DBS receiver are received. ACCESS MAIN MENU SCREEN Press MENU.
OK EN CH 7 8 21 ACCESS DBS RECEIVER BRAND SET SCREEN Press OK. SET DBS RECEIVER BRAND Press the appropriate NUMBER keys to enter the DBS Receiver Code from the following list, then press OK.
EN SIMPLE PLAYBACK AND RECORDING Simple Playback 1 PLAY STOP/EJECT FF Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don’t apply too much pressure when inserting. ● The VCR’s power comes on automatically. ● The counter is automatically reset to "0:00:00". ● If the cassette's record safety tab has been removed, playback begins automatically. Turn on the TV and select the VCR channel 3 or 4 (or AV mode).
EN Simple Recording 1 2 PLAY Turn on the TV and select the VCR channel 3 or 4 (or AV mode). STOP/EJECT SP/EP 3 4 CR /V 1 2 3 4 5 6 7 8 9 5 2 NUMBER LOAD A CASSETTE Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. SELECT RECORDING CHANNEL Press CH5∞ (+/–). Or press the appropriate NUMBER keys, then press ENTER. (The channel changes after a few seconds whether you press ENTER or not.
EN PLAYBACK AND RECORDING FEATURES Still Picture/Frame-By-Frame Playback Playback Features RE PLAY 1 EW VI SE U PA CH TIME SCAN FF REW REVIEW 1 2 3 2 2 4 5 6 7 8 9 0 PAUSE DURING PLAYBACK Press PAUSE. If there is vertical jitter, use the CH 5 (+) or ∞ (–) button to correct the picture. ● During still picture, the normal (mono) sound from the previous 3 seconds (approx.
EN Skip Search 1 Manual Tracking SKIP OVER UNWANTED SECTIONS NOTES: Index Search Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function. 1 2 START SEARCH % fi While the tape is stopped, press TIME SCAN ™ or £ ( or ).
EN PLAYBACK AND RECORDING FEATURES (cont.) MENU Video Stabilizer O K By activating the Video Stabilizer you can correct vertical vibrations in the picture when playing back unstable EP recordings that were made on another VCR. When this function is set to "ON", vertical vibration will be automatically corrected. *The default setting is "OFF". CH 1 1 2 3 4 5 6 7 8 9 Press MENU.
Repeat Playback PLAY PAUSE POWER EN 1 START REPEAT Press and hold PLAY (until " " blinks on the front display panel) during playback, then release. SP ● The entire tape is played back 50 times. STOP RE FF W VCR 2 STOP REPEAT To stop, press STOP at any time. NOTE: Pressing PLAY, REW, FF, PAUSE or ™ or £ also stops Repeat Playback. POWER Counter Reset 3 4 5 6 7 8 9 2 AY PL 0 4 TIMER 1 RESET COUNTER TO ZERO Press C.RESET.
PLAYBACK AND RECORDING FEATURES (cont.) Superimpose K This function, switchable between ON and OFF, determines whether or not operational indicators will appear on screen. O MENU 28 EN CH 1 OSD 2 3 4 5 6 7 8 9 2 2 0 4 1 3 MENU OK 4 ACCESS FUNCTION SET SCREEN Move the highlight bar (arrow) to "FUNCTION SET" by pressing CH5∞ or % fi, then press OK or .
K Your VCR can record two soundtracks simultaneously (Normal and Hi-Fi) and play back the selected one, or both together. Or, when viewing a pre-recorded tape that contains two separate Hi-Fi audio programs, you can choose to listen to either one by selecting either "Hi-Fi L" or "Hi-Fi R" in step 3. CH 1 1 2 3 2 4 5 6 7 8 9 0 3 4 ACCESS MAIN MENU SCREEN Press MENU. ACCESS FUNCTION SET SCREEN Move the highlight bar (arrow) to "FUNCTION SET" by pressing CH5∞ or % fi, then press OK or .
EN PLAYBACK AND RECORDING FEATURES (cont.) Movie Advance PL SKIP SEARCH AY 1 3 MENU OK ATTENTION Movie Advance and Movie Advance (Preview) works only on prerecorded cassettes that have been recorded in the SP mode, and have no safety tab. If the VCR detects the EP mode after you press OK in step 4, the following screen appears. MOVIE ADVANCE MOVIE ADVANCE CAN NOT BE SELECTED FOR EP RECORDINGS. PRESS (SKIP) TO CANCEL Skip Search will work for prerecorded EP tapes.
1 2 Your VCR is compatible with JVC’s AV COMPU LINK components, including amplifiers (or receivers) and televisions. AV COMPU LINK provides one touch control of the audio and video components that are linked via their AV COMPU LINK connectors. For example: simply load a cassette in the VCR and press PLAY and the AV COMPU LINK components automatically power on, the TV's AV mode is selected and the VCR goes into play mode. (PLAY need not be pressed if the cassette's record safety tab is removed.
EN PLAYBACK AND RECORDING FEATURES (cont.) Active Video Calibration Preparation 1 M EN U POWER Turn on the TV and select the VCR channel 3 or 4 (or AV mode). Active Video Calibration checks the condition of the tape during recording and playback, and compensates for poor reproduction to provide the best quality recording and playback pictures. *The default setting is "ON". 2 CH OK Press POWER. ACCESS MAIN MENU SCREEN Press MENU.
PLAY PAUSE EN Recording Perform steps 1 – 3 on page 23 ("Simple Recording") before continuing. 1 REC PLAY PAUSE 3 Playback The VCR assesses the quality of the tape once you start playback. Perform steps 1 and 2 on page 22 ("Simple Playback") before continuing. START PLAYBACK Press PLAY. ● The VCR adjusts the playback picture quality based on the quality of the tape in use. NOTES: Press and hold REC and press PLAY on the remote control, or press REC on the VCR's front panel.
EN PLAYBACK AND RECORDING FEATURES (cont.) Your VCR is equipped with the TimeScan function. TimeScan allows noise free pictures to be displayed on your TV screen in the forward and reverse search modes. Audio will be played back at normal speed during any of the TimeScan modes (Z pg. 35). TimeScan allows you to view a program in search mode while listening to the audio.
EN 35 TimeScan Reverse Names of special-effects playback Speed Search -7x Audio output -5x Play -3x -1x Audio is output. Forward Slow-Motion -1/6x -1/18x Audio is not output. *Still 0 Audio is output. Slow-Motion 1/18x 1/6x Audio is not output. Play 1x Search 2x 3x 5x 7x Audio is output. * Still mode cannot be engaged using the TIME SCAN buttons. Still mode can only be engaged by pressing the PAUSE button.
EN PLAYBACK AND RECORDING FEATURES (cont.) Display Elapsed Recording Time Recording Features TV O C /V SD 1 R DISPLAY 1 2 3 2 2 4 5 6 7 8 9 0 C.RESET RESET COUNTER TO ZERO Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs. DISPLAY ELAPSED TIME ON SCREEN During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds.
Stereo And SAP (Second Audio Program) K Your VCR’s built-in MTS decoder enables reception of Multichannel TV Sound broadcasts. When the channel is changed on the VCR ... ● The "STEREO" indication appears on the screen for about 5 seconds if the program is a stereo broadcast. ● The "SAP" indication appears on the screen for about 5 seconds if the program is a SAP broadcast. ● Both indications appear when a stereo program is accompanied by SAP audio. CH O MENU EN To Record Stereo Programs . . . . .
EN TIMER RECORDING VCR Plus+ Timer Programming Turn on the TV and select the VCR channel 3 or 4 (or AV mode). Timer recording allows you to program the VCR to automatically record a program that will be broadcast at some future time. The timer record function can be programmed using VCR Plus+ or Express Timer Programming up to 8 shows as far as a year in advance. (Z pg.
EN 5 1 2 2 4 5 6 NUMBER "8" 7 8 9 0 CANCEL 4 E MB NU TIMER STOP+/– PROG. 1 P /E SP OK 3 6 7 8 ATTENTION If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded. Pattern 1: The program with the lower program number will be recorded.
EN TIMER RECORDING (cont.) IMPORTANT VCR Plus+ Setup If you have moved to a different area or if a broadcasting station's channel number has been changed, the wrong VCR or CABLE CH number will be displayed on the VCR Plus+ Program screen (Z step 5 on page 39). When this happens, perform the following steps to set the correct the Guide Channel number for that station. Turn on the TV and select the VCR channel 3 or 4 (or AV mode).
K 4 O MENU EN 41 ACCESS GUIDE CHANNEL SET SCREEN % Press CH5∞ or %fi to move the highlight bar (arrow) to “GUIDE CHANNEL SET”, then press OK or . INITIAL SET CLOCK SET LANGUAGE ENGLISH =GUIDE CHANNEL SET CABLE BOX SET DBS RECEIVER SET CH SELECT WITH (5,∞) AND (OK) PRESS (MENU) TO END 5 INPUT GUIDE CHANNEL NUMBER (Ex.) When inputting the Guide Channel number 6 for WNJU(Ind.
EN TIMER RECORDING (cont.) You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer (Z pg. 8 or 11). Express Timer Programming 1 Turn on the TV and select the VCR channel 3 or 4 (or AV mode). 2 3 LOAD A CASSETTE Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR. ● The VCR comes on, and the counter is reset, automatically.
EN 8 M U N BE 1 2 3 R " "8 NUMBER "7" 5 6 7 8 9 NUMBER "9" 0 PROG. 4 TIMER Press SP/EP to set the tape speed. RETURN TO NORMAL SCREEN 9 ENGAGE TIMER MODE 10 Press TIMER. The VCR turns off automatically and "‰" is displayed on the display panel. To Timer-Record Weekly Or Daily Serials . . . . . . anytime during steps 3 through 9, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears on the screen.
EN Check, Cancel And Revise Programs M SP/EP EN U POWER TIMER RECORDING (cont.) 1 CH OK 2 DISENGAGE TIMER Press TIMER, then press POWER. ACCESS PROGRAM CHECK SCREEN Press PROG. CHECK. POWER 1 2 3 7 5 8 DATE+/– 4 STOP+/– 2 6 9 0 CANCEL 4 TIMER CH+/– START+/– 3 K PR O G .C P H /E EC SP MENU OK DATE 12/24 12/25 12/25 ACCESS PROGRAM SCREEN Press PROG. CHECK again to check more information. Each time you press PROG. CHECK, the next program's information appears.
EN 45 Auto SP→EP Timer Auto Timer If, when recording in SP mode, there is not enough tape to record the entire program, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a program of more than 2 hours in length. When the Auto Timer is set to ON the timer is automatically engaged when the VCR's power is turned off. It is automatically disengaged when the VCR is powered back on. For Example . . .
EN TIMER RECORDING (cont.) REC Instant Timer Recording (ITR) SP VCR This easy method lets you record from 30 minutes to 6 hours (selectable in 30-min. increments) and shuts the VCR off after recording is finished. 1 START RECORDING Press REC on the front panel. ENGAGE ITR MODE 2 Press REC again. " front display panel. 3 If you want to record for more than 30 minutes, press REC to extend the time. Each press extends recording time by 30 minutes.
EN REC LINK SP/EP Automatic Satellite Program Recording ATTENTION ● Be sure not to turn on the satellite receiver before the program is executed; otherwise, the VCR will start recording when the satellite receiver's power is turned on. ● If you have connected another appliance other than a satellite receiver to the rear AUDIO/VIDEO IN (L-1) connectors, be sure not to engage the Auto Satellite Prog Rec mode; otherwise, the VCR will start recording when the connected appliance's power is turned on.
EN EDITING You can use your VCR as the player or the recorder. Edit To Or From Another 1 VCR Player Your VCR AUDIO OUT VIDEO OUT Audio/Video cable (supplied) VIDEO IN AUDIO IN Another VCR Recorder AY PL CH NUMBER "0" 4 5 6 7 8 9 0 4 CH 1 PLAY 3 2 3 4 5 MAKE CONNECTIONS Connect an AV cable between the player’s VIDEO OUT and AUDIO OUT connectors and the recorder’s VIDEO IN and AUDIO IN connectors.
EN Edit From A Camcorder Recorder You can use a camcorder as the player and your VCR as the recorder. 1 Your VCR To rear panel REMOTE PAUSE/ AV COMPULINK connector VIDEO IN Mini-plug cable (not supplied) (JVC camcorder only) AUDIO IN Audio/Video cable (supplied) Camcorder 2 3 VIDEO OUT AUDIO OUT K 4 O MENU Player NUMBER "0" 9 0 4 1 3 MENU Connect an AV cable between the camcorder’s VIDEO OUT and AUDIO OUT connectors and your VCR’s VIDEO IN and AUDIO IN connectors.
K EDITING (cont.) ENABLE REMOTE PAUSE FUNCTION Press CH 5∞ or % fi to move the highlight bar (arrow) to "AV COMPULINK", then press OK or to set to "OFF". % 6 O MENU 50 EN FUNCTION =AUTO TIMER OFF SUPERIMPOSE ON AUTO SP= EP TIMER OFF VIDEO STABILIZER OFF 2ND AUDIO RECORD OFF AUDIO MONITOR HI-FI NEXT PAGE SELECT WITH (5,∞) AND (OK) PRESS (MENU) TO END CH ● The REMOTE PAUSE/AV COMPU-LINK connector works as the AV Compulink Playback connector when "AV COMPU-LINK" is set to "ON" (Z pg.
SPECIAL FEATURES EN 51 M TV Multi-Brand Remote Control BR SE T POWER TV The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below. *The default setting is JVC code 01. TURN ON THE TV TV/VCR 2 3 2 EN TE R 1 4 5 6 7 8 9 0 4 NUMBER 1 2 Turn the power on using the TV's remote control. SET TV BRAND CODE Refer to the chart in the left column.
EN SPECIAL FEATURES (cont.) M Cable Box Multi-Brand Remote Control BR SE T POWER CABLE/DBS 2 3 2 EN TE R 1 4 5 6 7 8 9 0 NUMBER 4 The VCR's remote control can control functions on the brands of cable boxes listed below. Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes. 1 2 1 TURN ON THE CABLE BOX Turn the power on using the cable box’s remote control.
EN 53 M DBS Receiver Multi-Brand Remote Control BR SE The VCR's remote control can control functions on the brands of DBS (Direct Broadcast Satellite) receivers listed below. T POWER CABLE/DBS 1 2 3 4 5 6 7 8 9 2 EN TE R NUMBER 0 1 4 2 1 TURN ON THE DBS RECEIVER Turn the power on using the DBS receiver's remote control.
EN SPECIAL FEATURES (cont.) A/B Control Two JVC VCRs POWER NUMBER "1" 1 2 3 4 5 6 7 8 9 NUMBER "2" The remote control is capable of controlling two JVC VCRs independently; one set to respond to your remote control's A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR to respond to B code signals.
TROUBLESHOOTING EN 55 Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair. POWER SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The power won’t come on. ● The power cord is disconnected. Connect the power cord. 2. The clock works, but the VCR’s power won’t come on. ● The TIMER mode is engaged with Auto Timer set to "OFF" ( Z pg. 45).
EN TROUBLESHOOTING (cont.) TIMER RECORDING SYMPTOM 1. Timer recording won’t work. POSSIBLE CAUSE ● The clock and/or the timer have been set incorrectly. ● The timer is not engaged. ● The VCR has not been set up properly. CORRECTIVE ACTION Set the clock and/or timer correctly. Press TIMER and check to make sure that ‰ appears on the front display panel. Re-perform the set-up procedures. Make sure you have compensated for Guide Channel and VCR or cable box channel number mismatches ( Z pg. 40). 2.
EN 57 OTHER PROBLEMS SYMPTOM POSSIBLE CAUSE 1. When scanning channels, some of them are skipped over. ● Those channels have been preset to be skipped. If you need the skipped channels, restore them (Z pg. 15). CORRECTIVE ACTION 2. The channel can’t be changed. ● Recording is in progress. Press PAUSE to pause the recording, change channels, then press PLAY to resume recording. 3. The remote control won’t operate my TV or cable box or DBS receiver. ● The remote control brand setting is incorrect.
EN QUESTIONS AND ANSWERS PLAYBACK RECORDING Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. When I pause and then resume a recording, the end of the recording before the pause is overlapped by the new recording. Why does this happen? A. This is normal. It reduces distortion at the pause and resume points. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Q.
INDEX EN 59 List Of Terms This guide serves as a quick way to locate frequently used terms and on-screen display names. A M A/B Code ....................................................................54 Active Video Calibration ............................................. 32 Add Channel ...............................................................15 Audio Monitor ............................................................29 Auto Channel Setting ..................................................
EN INDEX (cont.) FRONT VIEW 1 23 4 5 6 PLAY MENU OK POWER STOP/EJECT TV/VCR PAUSE VIDEO (MONO)L–AUDIO–R SP/EP CH REC LINK SP REC VCR 8 9 0! 1 Power On/Off Button (Z pg. 10) 2 MENU Button (Z pg. 10) 3 OK Button (Z pg. 10) 4 Cassette Loading Slot 5 Instant REVIEW Button (Z pg. 25) 6 TIME SCAN ™£ Button (Z pg. 34) 7 PLAY Button ( Z pg. 22) 8 VIDEO/AUDIO Input Connectors (Z pg. 49) 9 Channel [CH] 5∞ Button (Z pg. 23) 0 REC LINK Button (Z pg.
EN 61 REAR VIEW 23 1 OUT 4 IN ANTENNA IN VIDEO (MONO) L AUDIO REMOTE AV PAUSE COMPULINK R VHF/UHF TV CABLE BOX OUT CH3 CH4 5 67 1 Power Cord ( Z pg. 6) 2 VIDEO/AUDIO Output Connectors (Z pg. 48) 3 VIDEO/AUDIO Input Connectors (Z pg. 48) 4 ANTENNA IN Connector (Z pg. 6) 5 CABLE BOX Controller Connector ( Z pg. 16, 19) 8 6 REMOTE PAUSE/AV COMPULINK Connector ● REMOTE PAUSE Connector (Z pg. 49) ● AV COMPU-LINK Connector (Z pg. 31) 7 Channel 3/4 Switch (Z pg. 6) 8 TV OUT Connector (Z pg.
EN INDEX (cont.) REMOTE CONTROL 1 2 3 4 POWER TV/VCR ENTER/OSD DISPLAY 1 2 3 4 5 6 DBS DAILY(M-F) WEEKLY 7 8 9 2 AUX C.
SPECIFICATIONS GENERAL Power requirement Power consumption Power on Power off Temperature Operating Storage Operating position Dimensions (W x H x D) : AC 120 V` , 60 Hz : 22 W : 3W : 5°C to 40°C (41°F to 104°F) : –20°C to 60°C (–4°F to140°F) : Horizontal only : 400 x 94 x 340 mm (15-3/4" x 3-3/4" x 13-7/16") : 3.8 kg (8.4 lbs) : VHS NTSC standard Weight Format Maximum recording time SP : 210 min. with ST-210 video cassette EP : 630 min.
EN FOR SERVICING (Only in U.S.A.) HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-252-5722 Dear customer: In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit. In the event that repair is necessary, or for the address nearest your location, please refer to the factory service center list below or within the Continental United States, call 1-800-252-5722 for your authorized servicer.
WARRANTY (Only in U.S.A.) EN LIMITED WARRANTY 65 CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
MEMO
MEMO
HR-DD750U JVC COMPANY OF AMERICA DIVISION OF US JVC CORP. 41 Slater Drive, Elmwood Park, N.J. 07407 JVC CANADA INC. 21 Finchdene Square, Scarborough Ontario M1X 1A7 COPYRIGHT © 1998 VICTOR COMPANY OF JAPAN, LTD.