VIDEO CASSETTE RECORDER HR-S29U CABLE/ DBS TV MBR SET A/B POWER TV/VCR A. MONITOR DISPLAY 1 2 3 2 4 5 6 DBS DAILY(M-F) WEEKLY 7 8 9 C.
EN Dear Customer, Thank you for purchasing the JVC S-VHS video cassette recorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EN IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing. ATTENTION: 3 5. Ventilation Slots and openings in the cabinet are provided for ventilation.
EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket, or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. • Use a mounting accessory recommended by the manufacturer and follow the manufacturer’s instructions for any mounting of the product.
EN CONTENTS INSTALLING YOUR NEW VCR 6 Basic Connections .................................. 6 INITIAL SETTINGS 8 Plug & Play Setting ................................ 8 Auto Clock Set/Auto Tuner Set ................................... 8 Language Setting ................................... 9 Clock Setting ........................................ 10 Preparations ............................................................. 10 Setting clock semiautomatically — Semiauto Clock Set ...........................
EN INSTALLING YOUR NEW VCR Basic Connections ANTENNA IN (Antenna or cable input) Antenna or cable Coaxial cable Flat feeder VIDEO OUT Matching transformer (not supplied) AUDIO OUT AC Power Cord REMOTE PAUSE/ AV COMPU -LINK CABLE BOX IN S AUDIO OUT V I D E O Back of VCR VIDEO S VIDEO OUT OUT ANTENNA IN R L VHF/UHF TV OUT TV OUT AC Outlet S-video cable (supplied) To S-video input connector Audio/video cable (not supplied) To Audio/video input connectors RF cable (supplied) To 75
1 2 3 Check contents Make sure the package contains all of the accessories listed in “SPECIFICATIONS” (墌 pg. 61). Situate VCR Place the VCR on a stable, horizontal surface. Connect VCR to TV The following connections are required. RF Connection 1 Disconnect the TV antenna from the TV. 2 Connect the TV antenna cable to the ANTENNA IN terminal on the rear of the VCR. 3 Connect the supplied RF cable between the TV OUT terminal on the rear of the VCR and the TV’s antenna input terminal.
EN INITIAL SETTINGS Plug & Play Setting Auto Clock Set/Auto Tuner Set ATTENTION ● If you use a cable box, Plug & Play will not function; set the clock and tuner channels separately. (墌 pg.10 – 14) ● It takes several minutes for the VCR to complete the Plug & Play setting. ● Do not press any buttons on the front panel or on the Remote while Plug & Play is in progress. PLAY 49, 50, 51 REW FF REC LINK + VIDEO (MONO)L—AUDIO—R S-VHS ET During Initial Auto Clock Set “Auto” blinks.
EN Language Setting 9 This VCR offers you the language choice to view menus and some messages (excluding the on-screen display superimposed on the TV screen) — in English, Spanish or French. Select the desired language using the following procedure. The default setting is “ENGLISH”. Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. 1 Access Main Menu screen Press MENU.
EN INITIAL SETTINGS (cont.) Clock Setting Perform clock setting only if the clock has not been set correctly by the Plug & Play setting or if you use a cable box. Access the Clock Set screen to perform the Semiauto or Manual Clock Set. Each procedure starts from step after preparation steps below are finished. If you use a cable box, set the clock manually. (墌 pg. 12) 4 Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
Setting clock semiautomatically — Semiauto Clock Set You can change the host channel/D.S.T. /time zone setting manually. First follow steps to on page 10, then go to the following steps. 4 6 1 3 Set Auto Clock to ON Press SHUTTLE PLUS # CLOCK SET to move the highlight TIME DATE YEAR 1:00PM 12/24 00 SUN bar to “AUTO CLOCK”, AUTO CLOCK : ON then press SHUTTLE HOST CH : AUTO (CATV) D.S.T. : AUTO PLUS %fi so that “ON” TIME ZONE : AUTO is selected.
EN INITIAL SETTINGS (cont.) Set date 5 Press SHUTTLE PLUS %fi until the desired date appears, then press OK or SHUTTLE PLUS #. ● Holding SHUTTLE PLUS %fi changes the date in 15-day intervals. 1 2 3 4 5 6 7 8 9 Set year 2 0 6 Press SHUTTLE PLUS %fi until the desired year appears, then press OK or SHUTTLE PLUS # twice. Select D.S.T. mode 4 7 1 You can select either “ON” or “OFF”. ON– Adjustment will be made by the built-in clock itself.
EN Tuner Setting Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. 13 Setting channels automatically — Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, use Manual Channel Set (墌 pg. 14). 1 Access Main Menu screen Press MENU.
EN INITIAL SETTINGS (cont.) Access Tuner Set screen 2 Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “TUNER SET”, then press OK or SHUTTLE PLUS #. Access Manual Channel Set screen 3 1 2 3 2 4 5 6 7 8 9 0 4 4 Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “MANUAL CHANNEL SET”, then press OK or SHUTTLE PLUS #.
EN Cable Box Control Setting The following procedure is required if you receive your TV channels through a cable box (descrambler). The Controller allows the VCR to automatically switch the cable box channel during timer recording. The Controller is effective for recording broadcasts that have been programmed using VCR Plus+ (墌 pg. 30) or Express timer programing (墌 pg. 34). NOTE: Suggested location Place the cable box on top of the VCR.
EN INITIAL SETTINGS (cont.) Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. Access Main Menu screen on VCR 2 Press MENU. Access Initial Set screen 3 Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “INITIAL SET”, then press OK or SHUTTLE PLUS #. Access Cable Box Set screen 1 2 4 3 2 4 5 6 7 8 9 0 7 4 Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “CABLE BOX SET”, then press OK or SHUTTLE PLUS #.
6 7 EN Access Cable Box Brand Set screen Press OK. Enter cable box brand Press the appropriate Number keys to enter the brand code from the list shown to the right, then press OK.
EN INITIAL SETTINGS (cont.) DBS Receiver Control Setting Suggested location Place the DBS (Direct Broadcast Satellite) receiver on top of the VCR. Attach the VCR’s Controller to the top of the VCR with the Controller’s transmitter pointed towards the DBS receiver’s remote sensor. ATTENTION: The Controller can also control a cable box. If both a DBS receiver and a cable box are used, position the Controller so its signal reaches the remote sensors on both the DBS receiver and cable box.
EN Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. 19 Access Main Menu screen on VCR 2 Press MENU. Access Initial Set screen 3 Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “INITIAL SET”, then press OK or SHUTTLE PLUS #. Access DBS Receiver Set screen 1 2 4 3 2 4 5 6 7 8 9 0 4 Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “DBS RECEIVER SET”, then press OK or SHUTTLE PLUS #.
EN INITIAL SETTINGS (cont.) Access DBS Receiver Brand Set screen 6 Press OK. Enter DBS Receiver’s brand 7 1 2 3 4 5 6 7 8 9 2 0 7 4 Press the appropriate Number keys to enter the brand code from the following list, then press OK. The program currently received through the DBS receiver appears for about 10 seconds.
EN BASIC PLAYBACK AND RECORDING Basic Playback This VCR can check the tape condition during playback (and recording), and realizes the best possible pictures. 1 Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
EN BASIC PLAYBACK AND RECORDING (cont.) Basic Playback Features A Changing display information Press DISPLAY during playback. Each time you press the button, the front display panel shows the time counter, tape remaining time and the clock time in sequence. Tape Remaining Time Time Counter Clock Time PLAY REW FF REC LINK + VIDEO (MONO)L—AUDIO—R SP EP VCR S-VHS ET CH REC PAUSE STOP/EJECT STOP/EJECT (7/0) F A E 1 2 3 4 5 6 7 8 9 A C.
EN D Adjusting tracking condition — Tracking Adjustments Automatic tracking adjustment This VCR automatically adjusts the tracking condition. Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback. E Selecting monitor sound — Audio Monitor You can select the desired monitor sound. While playing back a tape on which stereo sound or SAP sound is recorded, press A. MONITOR on the Remote.
EN BASIC PLAYBACK AND RECORDING (cont.) G H PLAY REW FF REC LINK + VIDEO (MONO)L—AUDIO—R SP EP VCR S-VHS ET CH REC PAUSE STOP/EJECT Index codes are placed on the tape at the beginning of each recording when recording on this VCR. You can find and automatically play back from the beginning of any recording using the Index Search function. 1 2 2 3 4 5 6 7 8 9 2 0 Start search While the tape is not running, press SHUTTLE PLUS 4 or ¢ on the Remote.
EN Basic Recording Select recording channel 2 a– Press CH + or –. or b– Press the Number keys. ● If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so that the VCR mode indicator lights on the front display panel, to view the program to be recorded. Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. PLAY ( 3 ) REW FF (1) (¡) POWER 25 Set tape speed 3 Press SP/EP to set the recording speed.
EN BASIC PLAYBACK AND RECORDING (cont.) Basic Recording Features A Press DISPLAY during recording or recording pause. Each time you press the button, the front display panel shows the time counter, channel number, tape remaining time and the clock time in sequence.
EN D Showing on-screen display When “SUPERIMPOSE” is set to “ON” (墌 pg. 39, 40), you can see the current VCR status on the TV screen. ● For more detailed information about the on-screen display, see page 59. 1 Display VCR status on TV screen During recording or CH 125 RECORD THU 12:00 AM PAUSE recording pause, press STEREO ] SP SAP OSD. All indications + + + B E corresponding to the INDEX 1 NORM REMAIN 10:00 current VCR status are HI–FI COUNT –1:23:45 displayed for 5 seconds.
EN SPECIAL EFFECT PLAYBACK Special Effect Playback A B D E PLAY ( 3 ) A Locating particular scene rapidly — Picture Search 7 High-Speed Picture Search: Possible during normal playback or still picture playback. You can rapidly locate a particular scene on the tape. ). To do forward picture search, press FF ( To do reverse picture search, press REW ( ). ● If you press and hold the button for more than 2 seconds, simply releasing it cancels the picture search, and normal playback resumes.
EN B Viewing still picture — Still Picture Playback Press PAUSE ( 8 ) during normal playback. Playback is freezed and a still picture appears. To resume normal playback, press PLAY ( 3 ). NOTE: To obtain a noiseless still picture, it may be necessary to adjust tracking in slow motion playback before starting still picture playback. E 29 Viewing slow motion picture — Slow Motion Playback ● During normal playback: Press SHUTTLE PLUS 4 to decrease the playback speed.
EN TIMER RECORDING VCR Plus+® Timer Programing Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 8 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method (墌 pg. 34) as far as a year in advance.
4 Input receiving channel number The guide channel GUIDE CHANNEL SET number, which is GUIDE CH: 12 assigned to the TV or VCR CH : – – – cable station for the PlusCode number that PRESS NUMBER KEY (0–9) you entered in step , OR (5,∞), THEN (OK) PRESS (PROG.) TO END will appear automatically on the Guide Channel Set screen. Press the Number keys (or CH +/– or SHUTTLE PLUS %fi) to input the number of the channel on which the broadcast for the PlusCode number is received on the VCR or cable box, then press OK.
EN TIMER RECORDING (cont.) Changing VCR Plus+® Setting IMPORTANT If you have moved to a different area or if a broadcasting station’s channel number has been changed, the wrong VCR CH or CABLE CH number will be displayed on the Program screen (墌 step on page 31). When this happens, perform the following steps to set the correct guide channel number for that station.
1 2 3 4 5 Access Main Menu screen Press MENU. Access Initial Set screen Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “INITIAL SET”, then press OK or SHUTTLE PLUS #. MAIN MENU FUNCTION SET TUNER SET = INITIAL SET PRESS (5,∞), THEN (OK) PRESS (MENU) TO END Access Guide Channel Set screen Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “GUIDE CHANNEL SET”, then press OK or SHUTTLE PLUS #.
EN TIMER RECORDING (cont.) Express Timer Programing You can directly program the VCR’s timer to record up to 8 broadcasts, as far as a year in advance. Remember, the clock must be set before you can program the timer (墌 pg. 8 or 10). Load a cassette 1 Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR.
8 9 0 EN 35 Set tape speed NOTES: Press SP/EP to set the tape speed. ● Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost. As a result, when the power is supplied again to this VCR after the power failure, the following will take place. 1. This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting. 2.
EN TIMER RECORDING (cont.) Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. A Checking program settings 1 Disengage timer Press TIMER, then press POWER. ● When “AUTO TIMER” (墌 pg. 40) is set to “ON”, you do not have to press TIMER. A 1 2 3 4 5 6 7 8 9 –1 2 Access Program Check screen Press PROG. CHECK. 2 0 A 4 A –1 Access Program screen Press PROG. CHECK again to check more detailed information. Each time you press PROG.
EN Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. B 1 37 Canceling or changing program settings Access Program screen Repeat steps 1 to 3 on page 36. 2 Cancel or change program setting To cancel a program, press CANCEL when the Program screen you do not want is shown. 1 2 To change a program, press the appropriate button: START+/–, STOP+/–, DATE+/–, CH+/–, and/or SP/ EP when the Program screen on which you want to make changes is shown.
EN TIMER RECORDING (cont.) 3 1 2 3 4 5 6 7 8 9 To cancel a program, press CANCEL when the Program screen you do not want is shown. “PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears. 2 C –3 0 4 1 Cancel or change program setting C –3 C –3 PROGRAM 4 START STOP 9:00 PM = 10:00PM DATE CH 12/24/00 10 SP SUN PRESS (CANCEL) TO CANCEL PRESS (OK) TO CONFIRM PRESS (PROG.
OTHER USEFUL FUNCTIONS EN Useful Function Settings 39 You can use the other useful function settings on the Function Set screen by following the procedure described below. ● For the functions you can set on the Function Set screen, see pages 40 to 43. Access Main Menu screen Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
EN OTHER USEFUL FUNCTIONS (cont.) * The default setting is bold in the table below. 䡵 VIDEO CALIBRATION ON OFF When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest-possible pictures. This takes place whenever you play back a tape or start recording after inserting a tape.
EN 41 * The default setting is bold in the table below. 䡵 AUTO SP = EP TIMER ON OFF When this function is set to “ON”, the VCR automatically switches to EP mode to allow complete recording if there is not enough tape to record the entire program while timer-recording in SP mode. For Example . . .
EN OTHER USEFUL FUNCTIONS (cont.) * The default setting is bold in the table below. 䡵 AUDIO MONITOR HI-FI: Normally select this. Hi-Fi sound is played back. HI-FI L: Sound on the left Hi-Fi channel is played back. HI-FI R: Sound on the right Hi-Fi channel is played back. NORM: Sound on the normal track is played back. MIX: Both sounds on the Hi-Fi track and normal track are mixed and played back.
EN 43 * The default setting is bold in the table below.
EN OTHER USEFUL FUNCTIONS (cont.) Satellite Auto Recording This function allows you to automatically record a satellite program which is timer-programed on your DBS receiver. Preparation: Connect a DBS receiver to the AUDIO/ VIDEO IN or S VIDEO IN (L-1) connectors* on the rear; otherwise, you cannot use this function. • You can also connect the cable box if it has a timer. * To use these connectors, you have to select which one to use (墌 pg. 43).
EN Child Lock 45 You can disable the VCR operations. ● You can only use the Remote for this operation. While the VCR is turned on, press and hold POWER on the Remote for more than 10 seconds. The VCR turns off, and “CL” appears on the front display panel for about 5 seconds, then the clock time appears again. POWER 1 2 ● The child lock function is now activated and you cannot turn on the VCR by pressing POWER on the front panel.
EN EDITING Edit From Camcorder PLAY REW FF REC LINK + VIDEO (MONO)L—AUDIO—R CH S-VHS ET REC PAUSE STOP/EJECT Connection This VCR (for recording) REMOTE PAUSE/ AV COMPU -LINK CABLE BOX S IN AUDIO OUT V I D E O To S To AUDIO/ VIDEO VIDEO Input* Input VIDEO IN OUT 3 ANTENNA IN R L VHF/UHF TV OUT To REMOTE PAUSE/AV COMPULINK connector 1 2 3 4 5 6 7 8 9 2 Audio/video cable (not supplied) S-video cable (supplied) 8 Mini-plug cable (not supplied) (JVC camcorder only)
You can use a camcorder as the playback VCR and your VCR as the recording VCR. 1 2 3 4 5 Make connections Connect an audio/video cable between the camcorder’s audio/video output connectors and your VCR’s audio/video input connectors. ● When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated to the left.
EN Edit To Or From Another VCR 2 3 Ex. When using this VCR as the playback VCR This VCR (for playback) CABLE BOX IN V I D E O OUT REMOTE PAUSE/ AV COMPU -LINK AUDIO VIDEO To S-video Input OUT ANTENNA IN R L VHF/UHF TV OUT To AUDIO/ VIDEO OUT To S VIDEO OUT S-video cable (supplied) IN Another VCR (for recording) You can use your VCR as the playback or recording VCR. ● Refer also to the other VCR’s instruction manual for connection and its operations.
EN MULTI-BRAND REMOTE CONTROL TV Brand Setting 49 This Remote can control some functions of remote controllable TVs listed below. Without setting, you can control a JVC TV. Turn on the TV 1 – 2 Turn on the TV using the Power button on the TV or its Remote. Set TV brand code 2 2 Follow the example shown below. Press and hold TV. Press MBR SET. Press the Number keys to enter your TV’s brand code by referring to the table below. Press OK, and release TV. The TV should turn off.
EN MULTI-BRAND REMOTE CONTROL (cont.) Cable Box Brand Setting This Remote can control some functions of the cable boxes listed below. Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes. Turn on the cable box 1 Enter cable box brand code POWER 2 – 2 1 4 2 CABLE/DBS Turn on the cable box using the Power button on the cable box or its Remote. – 2 Follow the example shown below. Press and hold CABLE/DBS. Press MBR SET.
EN DBS Receiver Brand Setting 51 This Remote can control some functions of the DBS (Direct Broadcast Satellite) receivers listed below. Turn on the DBS receiver 1 Turn on the DBS receiver using the Power button on the DBS receiver or its Remote. Enter DBS receiver brand code 2 Follow the example shown below. Press and hold CABLE/DBS. Press MBR SET. Press the Number keys to enter your DBS receiver’s brand code by referring to the table below. Press OK, and release CABLE/DBS.
EN MULTI-BRAND REMOTE CONTROL (cont.) Changing Remote Control Code This Remote is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals. This Remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR and the Remote to respond to B code signals.
EN TROUBLESHOOTING 53 Before requesting service, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair. POWER SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The power will not come on. ● The AC power cord is disconnected. ● Child lock is on. Connect the AC power cord. Turn off child lock function (墌 pg. 45). 2. The clock works, but the VCR’s power will not come on.
EN TROUBLESHOOTING (cont.) TIMER RECORDING SYMPTOM 1. Timer recording will not work. POSSIBLE CAUSE ● The clock and/or the timer have been set incorrectly. ● The timer is not engaged. ● The VCR has not been set up properly. CORRECTIVE ACTION Set the clock and/or timer correctly. Press TIMER and check to make sure that ‰ appears on the front display panel. Re-perform the set-up procedures. Make sure you have compensated for guide channel and VCR or cable box channel number mismatches (墌 pg. 32). 2.
EN 55 OTHER PROBLEMS CORRECTIVE ACTION SYMPTOM POSSIBLE CAUSE 1. When scanning channels, some of them are skipped over. ● Those channels have been preset to be skipped. If you need the skipped channels, restore them (墌 pg. 14). 2. The channel cannot be changed. ● Recording is in progress. Press PAUSE ( 8 ) to pause the recording, change channels, then press PLAY ( 3 ) to resume recording. 3. The Remote will not operate your TV or cable box or DBS receiver. ● The brand codes are set incorrectly.
EN TROUBLESHOOTING (cont.) Questions and answers PLAYBACK RECORDING Q. What happens if the tape reaches its end during playback or search? A. The VCR automatically rewinds it to the beginning. ............................................ Q. Can the VCR indefinitely remain in still mode? A. No. It stops automatically after 5 minutes to protect the heads. ............................................ Q.
EN INDEX 57 List of terms This guide serves as a quick way to locate frequently used terms and on-screen display names.
EN INDEX (cont.) Front panel 1 3 456 2 PLAY FF REW REC LINK + VIDEO (MONO)L—AUDIO—R SP EP VCR S-VHS ET 7 CH 0 8 9 1 POWER button : 墌 pg. 21, 25 2 Cassette loading slot 3 REVIEW button : 墌 pg. 24 4 REW ( 1 ) button : 墌 pg. 21, 25, 28 5 PLAY ( # ) button : 墌 pg. 21 6 FF ( ¡ ) button: 墌 pg. 21, 25, 28 7 AUDIO/VIDEO input connectors : 墌 pg. 46 8 S VHS ET button and lamp : 墌 pg. 27 REC PAUSE STOP/EJECT ! @ # $%^ 9 REC LINK button and lamp : 墌 pg. 44 0 Front display panel : 墌 pg.
EN Rear panel 1 3 4 2 REMOTE PAUSE/ AV COMPU -LINK CABLE BOX S IN AUDIO OUT V I D E O VIDEO 56 1 AC power cord : 墌 pg. 6 2 CABLE BOX Controller connector : 墌 pg. 15, 18 3 REMOTE PAUSE/AV COMPULINK terminal 1 2 3 4 5 IN OUT ANTENNA IN R L VHF/UHF TV OUT 789 4 ANTENNA IN terminal : 墌 pg. 6 5 S VIDEO IN connector : 墌 pg. 46 6 S VIDEO OUT connector : 墌 pg. 6 7 AUDIO/VIDEO IN connectors : 墌 pg. 46 8 AUDIO/VIDEO OUT connectors : 墌 pg. 48 9 TV OUT terminal : 墌 pg.
EN INDEX (cont.) Remote CABLE/ DBS TV MBR SET A/B POWER TV/VCR A. MONITOR DISPLAY 1 2 3 4 5 6 DBS DAILY(M-F) WEEKLY 7 8 9 C.
EN SPECIFICATIONS GENERAL TIMER Power requirement : AC 120 V` , 60 Hz Power consumption Power on : 20 W Power off : 2.5 W Temperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (W x H x D) : 400 x 94 x 283 mm Weight : 3.3 kg Format : S-VHS/VHS NTSC standard Maximum recording time SP : 210 min. with ST-210 video cassette EP : 630 min.
EN FOR SERVICING (Only in U.S.A.) HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-537-5722 http://www.jvc.com Dear customer, In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repair is necessary, or for the address nearest your location within the Continental United States, please call 1-800-537-5722 for your nearest authorized servicer or visit our website at www.JVC.com.
EN WARRANTY (Only in U.S.A.) LIMITED WARRANTY 63 CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
HR-S29U VICTOR COMPANY OF JAPAN, LIMITED COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD.
