Operation Manual

ManualsBrandsJVC ManualsVideoHR-S6955

advanced features 47

The VCR needs to find, identify and memorise all available stations in your area in order to

record programmes correctly. Once done, pressing the PR + or - buttons enables you to jump

to the available channels without going via any vacant channels. This channel search can be

done either automatically or manually. You should only need to perform either of the

following procedures if Auto Setup has failed to identify and record available channels or

you have moved to a new area.

Auto Channel Setup

get to the main menu Press m.

perform auto channel set Move the highlight bar to AUTO CH

SET

using the A and B buttons and press

(or E).

rf and scart connection If you have chosen to connect the

VCR to the TV with both the RF Cable and a 21-pin SCART Cable

(not provided) and the TV set is in its AV mode (see the TV

manual), the

AUTO SET screen will appear on the TV and remains

there for about 4–12 minutes while the VCR searches for receivable

stations. During Auto Channel Set the

mark on the screen moves

from left to right.

The caption

SCAN COMPLETED appears at the end of the process for

about 5 seconds.

confirmation screen Once

Auto Channel Set has completed

its search, the confirmation screen will appear showing the details

(

PR = Preset Number, CH = Channel Number and ID = Station

Name) of the TV stations that the process has found. The first

station will have a highlight bar over it and will be blinking. This

screen and the programme currently being broadcast on the

selected station will alternate at 8second intervals. To view the

next channel, press the A and B buttons to move the

highlight bar to the required channel.

return to normal screen Press m.

NOTES ON CHANNEL RECEPTION

incorrect station id In certain reception conditions, station names may not be stored

correctly by the VCR and Auto Guide Program Number Set may not work properly. If the Guide

Program Numbers are not set, entering a PlusCode number, may result in an incorrect channel

being recorded.

poor reception The VCR memorises all stations found regardless of their quality. If a station’s

quality is poor, you can delete that station from the memory (see page 49).

Tuner Set

[10]

a k: EDIT

a [x]: DELETE

[MENU]: EXIT

BBC1

BBC2

ITV

CH4

CH5

- - - -

CH ID

- - - -

[1] a k

[MENU]: EXIT

MAIN MENU

MODE SET

AUTO CH SET

MANUAL CH SET

OUTPUT/INPUT SET

INITIAL SET

AUTO SET

PLEASE WAIT

[MENU]:EXIT

HR-S6955EK-EN/p47-52 3/13/02, 05:09 PM47