User's Manual

Masterpage:Right-NoTitle0
EN 31
Filename [HRS9850EU2.fm]
Page 31 May 21, 2001 1:38 pm
D
Set the tape speed.
Press
SP/LP/EP
(
p
).
● It is not possible to select EP mode if “COLOUR SYSTEM” is
set to “MESECAM”.
(
墌
pg. 71
)
E
Set the VPS/PDC mode.
Press
VPS/PDC
to select “ON” or “OFF”.
● If “VPS/PDC ON” is displayed on the TV screen or “VPS/PDC”
is lit on the front display panel, VPS/PDC is set to ON.
● If “VPS/PDC OFF” is displayed on the TV screen or “VPS/PDC”
is not lit on the front display panel, VPS/PDC is set to OFF.
墌
“VPS/PDC Recording” on page 33.
F
Access the Title Edit screen.
G
Enter the programme title.
H
Return to the normal screen.
Press
PROG
or
OK
. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears. If “PROGRAM OVERLAPPED” appears
on the TV screen and “Err” on the front display panel, see
page 37.
● Repeat steps
1
–
8
for each additional programme.
I
Engage the recorder’s timer mode.
Press
#
(
TIMER
). The recorder turns off automatically and
“
#
” appears on the front display panel.
● To disengage the timer mode, press #
(
TIMER
) again.
NOTES:
●
To Change The Stop Time . . .
. . . press
STOP +/–
in step
3
. You can compensate for
anticipated programme schedule delays.
●
To Timer-Record Weekly Or Daily Serials . . .
. . . in step
3
, press
WEEKLY
(
number key
“
9
”) for weekly
serials or
DAILY
(
number key
“
8
”) for daily serials (Monday —
Friday). Either “WEEKLY” or “DAILY” appears on the TV
screen. Pressing the button again makes the corresponding
indication disappear.
●
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes (
墌
pg. 36).
●
It is not possible to timer-record a TV programme with a
S
HOW
V
IEW
number which starts with “0”.
●
It is not possible to timer-record a satellite broadcast received
on the channel position “0” by the satellite receiver.
Press the
number key “1”
.
The Title Edit screen appears.
● You can access the Title Edit
screen only when
“NAVIGATION” is set to
“ON”. (
墌
pg. 43)
Press the
number keys
and
e
to enter characters, then
press
OK
. For details, refer to
“Entering Character” on
page 45.
Satellite Receiver Users
To timer-record a satellite broadcast using the S
HOW
V
IEW
system:
A Perform “Satellite Receiver Control Setting” on page 17.
B Perform steps
1
–
9
. In step
3
, the front display panel
shows “L2” for the channel position. In step
5
, you cannot
set “VPS/PDC” to “ON”.
C Leave the satellite receiver’s power on.
ATTENTION
Guide Program Number Set
“GUIDE PROG SET” appears after performing step
3
if the
Guide Program number for the S
HOW
V
IEW
number you
entered has not been set.
If you want to set the Guide Program number for the satellite
broadcast station, press the
number key
“
0
” to change “TV
PROG” to “SAT”. Press
rt
to input the channel position
number on which your recorder or satellite receiver receives
that station, then press
OK
or
e
to set the Guide Program
number. The S
HOW
V
IEW
Program screen appears.
(Example)
To timer-record a ZDF
programme with the
S
HOW
V
IEW
system.
* If your recorder receives ZDF on
the channel position 2, press
OK
or
e after entering “2”.
HRS9850EU1.book Page 31 Monday, May 21, 2001 1:44 PM