Manual

.!
'_:i,_i_:_:i:i!___•_':_•
. ..;-
30 Z!iii!i!!iil;!!iiii!!ili!i!
C.MEMORY
POWER
Tape Position Indicator
The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW or
perform an Index Search or Instant
ReView. The position of" III ,, in
relation to "B" (Beginning) or "E"
(End) shows you where you are on
the tape.
NOTE:
"SUPERIMPOSE" must be set to "ON", or the indicator will not
appear (_" lag. 27).
Next-Function Memory
The Next Function Memory "tells" the VCR what to do after
rewinding. * Before continuing, ensure that the VCR is in stop
mode.
a- For Automatic Start Of Playback After Tape Rewind...
•.. press REW, then press PLAY within 2 seconds•
b- For Automatic Power Off After Tape Rewind...
•.. press REW, then press POWER within 2 seconds.
c- For Automatic Timer Standby After Tape Rewind...
•.. press REW, then pr_.s TIMER within 2 seconds•
NOTE:
If you want the "next function" to automatically start when the
counter reads "OH OOM OOS"(instead of at the beginning of the
tape), press (7.MEMORY so that the counter memory indicator
appears on the front display panel before pressing REW or IF.
AV COMPU LINK Playback
Your VCR is compatible with JVC'sAV COMPU LINK components,
including amplifiers (or receivers) and televisions. AV COMPU
LINK provides one touch control of the audio and video compo-
nents that are linked via their AV COMPU LINK connectors.
For example: simply load a cassette in the VCR and press PLAY
and the AV COMPU LINK components automatically power on,
the TV's VIDEO mode is selected and the VCR goes into play
mode. (PLAY need not be pressed if the cassette's record safety
tab is removed.)
MAKE CONNECTION
Connect your VCR to an AV COMPU LINK component
as shown in the illustration on page 31.
• The AV COMPU LINK cable is a mono 3.5 mm mini-
plug to mono 3.5 mm mini-plug connector.
TURN ON THEVCR
Press POWER.
ACCESSMAIN MENU
SCREEN
Press MENU as many times as necessary.