Manual

: ! k . :;!• .i
• ;" :°: i:_:'>.=: --i-_i
; ii !iii!
VCR Plus+
Timer
Programming
NUMBER
NUMBER "9"
I efore VCR Plus+ Timer programming, see "VCR Plus+
Setup" on page 19.
Enter Program Information
LOAD A CASSETTE
Make sure the record safety tab is present.
• The VCR's power comes on automatically.
• If you're watching on channel 3 or 4, press TV/VIDEO
to select the VIDEO mode. VIDEO is displayed on the
front display panel.
ACCESSVCRPLUS+SCREEN
PressMENU.
VCR PLUS+
• The clock must be set in
order to access the VCR
Plus+ screen. If you
haven't set the clock, the
Main Menu screen
appears when you press
MENU. Refer to page 7
for the Dual Quick Set procedure or page 8 for the
clock setting procedure.
PRESSNUMBERKEY(O.-9)
PRESS(MENU)TOMAINMENU
ENTERPLUSCODENUMBER
Press the appropriate
NUMBER keys to enter the
PlusCode number printed
in the TV listings for the
TV program you wish to
record, then press OK. The
Program screen appears.
• To make corrections,
PROGRAM1
(VCRPLUS+12345678)
DATE 7/10 FRI
START 8:00PM
STOP 9:00PM
CHANNEL 8 SP
PRESS(8=DAILY,9=WEEKLY
SP/EP,_RECSPEED)
PRESS(MENU)TOEND
pressCANCEL and input the correct PlusCode number.
• If the PlusCode number you input is incorrect,
"ERROR" may appear on the screen to advise you of
the error. This happens when the PlusCode number is
for a program which has already passed. "ERROR" is
displayed for about 4 seconds and the VCR Plus+
screen reappears (step 2).
CHECK INPUTDATA
The PlusCode number you entered appears in the
Programscreen. Check to make sure it's accurate.
• To timer-record daily or weekly serials, press DAILY
(NUMBER "8") or WEEKLY (NUMBER "9"). "DAILY"
or "WEEKLY" appears on the Program screen.
• If you made a mistake, press CANCEL and, after
pressingMENU as many times as necessary to access
the VCR Plus+ screen, input the correct PlusCode
number.
CONTINUED ON NEXT PAGE.