Manual

Auto clock setting
The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone
and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel
signal. Preparation:
• You must set the antenna connection before the AC cord plug is
inserted into the AC outlet.
• Make sure the AUTO CH MEMORY(on P.19) is done.
Auto clock setting
WAIT 30 MINUTES! when the power switch is off, after the
connections of the antenna and the power plug. Because the Auto
Clock setting feature is activate.
After the clock is set automatically, you may have to set the Time
Zone and Daylight Saving Time.
Press POWER to turn on the DVD/VCR after the Auto Clock operation
completed.
• When shipped from factory, the AUTO CLOCK option is set to ON position.
• If you turn the DVDNCR on during Auto Clock setting, the clock is not set.
• With cable box connection, if the Auto Clock Setting is unsuccessful,
please select the PBS channel carrying the XDS information, then
turn the DVD/VCR off. After 30 minutes, turn the DVDNCR on, and
if the clock is not set automatically, set the clock manually. (See page 23)
Canadian Viewers:
Please see note regarding the Auto Clock Setting option on page 55.
Time Zone setting (STANDARD TIME)
In the rare event that you live within broadcast range of two
stations in two different time zones, the DVD/VCR may recognize
the wrong station for the AUTO CLOCK set.
To correct the situation:
Preparation:
• Turn ON the TV.
• When a TV is connected with an audio/video cable, select the video
input mode on the TV.
• When a TV is connected only with an antenna cable, set to the
video channel 3 or 4. Then select VCR position with TVNCR.
• Make sure the VCR mode has been selected. (Is the VCR indicator
being light?) (see steps 1-2 on page 18)
Press SETUP MENU. The VCR menu screen will appear.
Press • or • to select the SYSTEM SET UP menu, then
press ENTER.
Press • or •
to select the
"STANDARD TIME" option, then
press ENTER.
NOTE:
• After Auto Clock setting, in some case
the clock may display the other time
zone's. You can correct the clock by
selecting your Time Zone setting
above.
• When the clock is not set or you set
the clock manually, Time Zone setting
is not available.
Press or to select Time
your
Zone, then press the ENTER.
Press SETUP MENU until the MENU screen is cleared.
21