Manual
Recording a TV program
Recording and viewing the
same TV program
Preparation:
• Turn ON the TV and set it to the video input mode.
• Make sure TVNCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
Load cassette with the
a
tape
erase
prevention tab intact.
The VCR will automatically turn on.
Press SP/EP to select the desired tape
speed SP or EP.
The tape counter and SP or EP will
appear on the screen for about 4
seconds.
Set option appropriate position (See page
the TV/CATV to the
19).
Press Number keys or VCR CH +/- to select the channel to
be recorded.
1-9
10-12
13-99
100-125
Press 0 twice and then 1-9 as required. Example: To
select 2, Press "002".
Press 0 first and then the remaining 2 digits in order
from left to right.
Example: Press 012 for "12".
Press 2 digits in order.
Example: Press 22 for "22".
Press the 3 digits in order.
Example: Press 110 for "110".
NOTE:
• If the erase prevention tab is removed,
the tape will eject when both the REC
and PLAY are pressed for recording.
• If you wish to watch the DVD playback
during the normal recording on VCR,
press DVD to change to DVD mode
and perform the DVD playback(see
P.37).
28
VHF/U HF/CATV CHANNELS
TV
VHF
2-13
UHF
14-69
CATV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-l)
100-125 (100)(125)
01 (5A)
On the VCR, REC.
press
Or on the Remote, while holding REC,
press PLAY.
"•" will appear on the screen for
about 4 seconds and "REC" will
appear on the display.