Manual

Instant Timer Recording (ITR)
The Instant Timer Recording
feature provides a simple and
convenient way to make a timed
recording.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Make sure TVNCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
Example: Instant Timer Recording for 30 minutes.
Load cassette with the
a
tape
erase
prevention tab intact.
The VCR will automatically turn on.
Press SP/EP to select the desired tape
speed SP or EP.
The tape counter and SP or EP will
appear on the screen for about 4
seconds.
Set option appropriate position (See page
the TV/CATV to the
19).
Press Number keys or VCR CH +/- to
select the channel to be recorded.
NOTE:
If you wish to watch the DVD playback
during the ITR, press DVD to change to
DVD mode and perform the DVD
playback(see P.37).
5
Press REC on the VCR or while holding REC, press PLAY on
the Remote to begin recording. Press REC on the VCR again to
stop recording after 30 minutes. Each additional press of REC
will increase recording time as shown in the chart below, up to a
maximum of 5 hours. The ITR and recording time will appear on
the screen for about 4 seconds. And, REC will keep blinking in
the display.
Press Recording time
once NORMAL REC
twice 0:30
3 times 1:00
4 times 1:30
5 times 2:00
Press Recording time
6 times 3:00
7 times 4:00
8 times 5:00
9 times NORMAL REC
To cancel ITR
Press STOP or turn off the power.
"•" will appear on screen for about 4
seconds.
30