Manual

Timer-Recording
Timer Recording Special case
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.
MO-SA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous
page. At picture 3 press SET + or- repeatedly until the
desired setting appears. Then press ENTER.
When you press SET - repeatedly, the indicator at
DATE will change as follows, in this case the today is
Friday.
The current day (Friday) ---> SU-SA (Sunday to Saturday)
t
MO:SA(Mondayto Saturday)
Onemonth later _,
minus oneday MO-FR(Mondayto Friday)
A
,
i
WKL-WE _-- WK -TH (WeeklyThursday)
(WeeklyWednesday)
In case Timer programs-overlap
• Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
8:00 9:00 10:00 11:00
Program 1 ,_
I
Program 2 _
Deleted Parts
Program 3 ,_
Non Recorded Portion Parts
Recording Prog.1 Prog.2 Prog.3
Control Settings
NOTE:
• The daily/weekly recording can be made continu-
ously until the recording is canceled or the tape
reaches the end.
• During timer recording the automatic rewinding
mechanism does not function.
Confirmation / Cancellation of the Timer
Recording
1
2
If the Timer has been activated, press TIMER to
deactivate the Timer. The clock symbol(P']) will
disappear. Then press VCR to change to VCR
mode.
To confirm Timer program:
At picture 1 on the
previous page select the
TIMER REC SET option
and press ENTER.
Then the timer program
list as right will appear on
the screen.
3
To cancel Timer program:
Press SET + or - to
select the unnecessary
program, then press
CANCEL to cancel the
program.
Press SETUP MENU until the
repeatedly TV-picture
appears.
NOTE:
• If there are other timer record programs remaining,
TIMER must be pressed to reactivate the timer,
otherwise the remaining timer record programs will
be ignored.
• You cannot confirm the Timer program during timer
recording operation.
• You can also correct the programmed setting in
program confirm mode.
At step 2 above, press ENTER to enter the program
input mode. Then press ENTER repeatedly until the
item you wish to correct
blinks. Then correct the data
with SET + or -.
Then press SETUP MENU
repeatedly until the TV-
picture appears.
32