Manual

Duplicatinga videotape/Duplicatinga disc materialonto a videotape
Duplicating a video tape
If you connect the VCR to another VCR or camcorder, you
Make all connections before turning on the power.
Load blank cassette withthe
a
tape
erase
preven-
tion tab intact into the recording VCR.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
Press SP/EP to select the desired SPtape speed
or EP.
It is recommended that you set the speed to the
SP mode on the recording VCR for best results.
Press VCR CH + to select AUDIONIDEO
or
input
position. "L" will appear in the
I
display, i_
can duplicate a previously recorded tape.
Press REC the VCR.
on
recording
Or on the Remote, while holding REC, press PLAY.
Then press PAUSE.
Press PLAY button the VCR
on
playback
or
CAMCORDER, then press PAUSE button.
Press PAUSE both the VCRs
on
simultaneously
to
begin the duplicating process.
Connection with second Video recorder
Playback VCR
ttt°
0@@@
To VIDEO OUT _)(_ To AUDIO (R) OUT
I 'To AUDIO (L) OUT
AUDIO/VIDEO Cord (supplied)
Recording VCR
f II, ,ll
Io ooloo oolooo 1
To VIDEO IN _To AUDIO (R) IN
-T-\.
To AUDIO (L) IN
Connection with Video camera
Playback Ca_
pTo ck
Recording VCR
_ III I
, °°°1©° !
_oTo ToAUDIO(R)IN
AUDIO(L)IN
/ AUDIO/VIDEO Cord (not supplied)
To VIDEO IN
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical camcorder dubbing hookup
is shown above.
Duplicating a disc material onto a video tape
You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVDNCR only.
If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark "_[_ "will
appear on the screen for approx. 4 seconds. See page 37 for more information about the DVD playback.
Preparation:
• Load a cassette tape with the erase prevention tab
intact.
• Select the tape speed in the VCR mode. (see P.28)
• Load a disc you wish to duplicate.
Press DVD to select the DVD mode. DVD
(The
indicator will light)
Press PLAY to start the disc playback.
During playback, press on or
disc REC the VCR
while holding REC, press PLAY on the Remote.
The duplicating will start.
Note:
You can set the duplicating time using the ITR-function.
At step 3 above press REC repeatedly until the desired
duplicating time appears on the screen.(P.30)
34