Manual

Changing angles /Title selection / DVD menu
Preparation:
• Turn ON the TV and set it to the video input mode.
• Make sure TVNCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light)
Changing Angles
When playing back a disc recorded with multi-angle facility, you
can change the angle that you are viewing the scene from.
during playback.
Press ANGLE
The current angle will appear.
Press ANGLE repeatedly until the desired angle is selected.
Title Selection
Two or more titles are recorded on some discs. If the title menu
is recorded on the disc, you can select the desired title.
during playback.
Press TITLE
Title menu appears on the screen.
• Press TITLE again to resume playback at the scene when you
pressed TITLE.
Press • / • select the desired title.
A/V or to
Press ENTER or PLAY.
The playback of the selected title will start.
Note:
Depending on the DVD, you may not
be able to change the angles even if
multi-angles are recorded on the disc,
or you may be unable to select the title,
and a "title menu" may simply be called
a "menu" or "title" in the instructions
supplied with the disc.
DVD Menu
Some DVDs allow you to select the disc contents using the
menu.
When you play back these DVDs, you can select the subtitle
language and sound-track language,etc, using the DVD menu.
Press DVD MENU
during playback.
The DVD menu appears on the screen.
• Press DVD MENU again to resume playback at
the scene when you pressed DVD MENU.
Press A/V or • / • to select the desired item.
Press ENTER.
The menu continues to another screen. Repeat steps 2 and 3 to
set the item completely.
45