Manual

Settingaudiosoundtracklanguage/ Settingsurroundsound
Setting audio soundtrack
language
The same audio soundtrack language
can always be selected by your unit
even if you replace the disc or turn
the power off.
Note:
• If the selected language is not
recorded on the disc, the original
language will be heard.
• The "SPATIALIZER 3-D STEREO" is
effective only for the sound of disc.
To cancel Surround mode:
Follow the right steps 1-2, then press
ENTER to select the OFF position.
Press SETUP MENU to return to the TV.
50
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light)
Press SETUP MENU in the
stop
mode.
Press • or • toselect"Language"
Press ENTER.
Then press • or • to select
"Audio".
Press ENTER.
Press • or • to select your
desired Audio Language, then
press ENTER.
• English, Francais, Espanoh
The language you have selected will play if it is recorded on
the disc.
• OTHER: If you want to select another language,
enter the language code (See the Language Code List on page
53).
• ORIGINAL: The unit will select the first priority language of
each disc.
To make SETUP screen disappear, press SETUP MENU.
Setting surround sound
This DVDNCR equipped with a "SPATIALIZER 3-D STEREO"
as the SURROUND option in the VCR menu. It can produce the
effect of being in a cinema or a concert hall.
Since the SURROUND option exists in the VCR menu, the setting
is possible only during a disc-playback or in the VCR mode.
During disc-playback press
SETUP MENU.
2 Press • or • to select
SURROUND.
Then press ENTER to select [ON]
or [OFF].
Press SETUP MENU until the menu screen is cleared.