Filename [EN_XVC24S_Cov1.fm] EN_XVC24S_Cov1.fm Page 1 Monday, February 28, 2005 10:57 AM DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC24S For Customer Use: INSTRUCTIONS Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No.
Filename [XVC24S_03Safety.fm] Masterpage:Left0 XVC24S_03Safety.fm Page 2 Monday, February 28, 2005 11:04 AM 2 EN Dear Customer, Thank you for purchasing the JVC DVD player & VHS video cassette recorder. Before use, please read the safety information and precautions to ensure safe use of your new unit. CAUTIONS CAUTION: THIS PRODUCT USES A LASER SYSTEM. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Filename [XVC24S_03Safety.fm] XVC24S_01.book Page 3 Monday, February 28, 2005 9:24 AM Masterpage:Right-No-Heading EN IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.
Filename [XVC24S_03Safety.fm] Masterpage:Left-No-Heading XVC24S_01.book Page 4 Monday, February 28, 2005 9:24 AM 4 EN USE SERVICING 1. Accessories To avoid personal injury: ● Do not place this product on an unstable cart, stand, tripod, bracket, or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. ● Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
Filename [XVC24S_03Safety.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 5 Monday, February 28, 2005 9:24 AM EN DSSTM is an official trademark of DIRECTV, Inc., a unit of GM Hughes Electronics. DISH NetworkTM is a trademark of Echostar Communications Corporation. ● Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. ● “DTS” and “DTS 2.0 + Digital Out” are trademarks of Digital Theater Systems, Inc.
Filename [XVC24S_04TOC.fm] Masterpage:Left XVC24S_01.book Page 6 Monday, February 28, 2005 9:24 AM 6 EN DISC INFORMATION CONTENTS 7 About Discs ......................................................... 7 INDEX INSTALLING YOUR NEW UNIT 9 13 Basic Connections ............................................. 13 Component Video Connection (DVD deck only) ............................................ 14 Scan Mode Set (DVD deck only) ....................... 15 INITIAL SETTINGS 16 Plug & Play Set ...........
Filename [XVC24S_05DiscInfo.fm] Masterpage:Right0 XVC24S_01.book Page 7 Monday, February 28, 2005 9:24 AM EN DISC INFORMATION Region Number About Discs Playable Discs You can use discs with the following logos for playback only. DVD VIDEO 7 Video CD/Super Video CD The world is divided into 6 regions for DVD VIDEO discs. DVD VIDEO discs are assigned a region number to indicate which region they may be played back in.
Filename [XVC24S_05DiscInfo.fm] Masterpage:Left+ XVC24S_01.book Page 8 Monday, February 28, 2005 9:24 AM 8 EN DISC INFORMATION (cont.) File Structure of Discs Care and Handling of Discs DVD VIDEO How to handle discs Typically, DVD VIDEO discs are made up of larger units called “titles.” Each title has a number (title number) that can be used to select desired titles. Titles are further divided into units called “chapters.
Filename [XVC24S_06Index.fm] Masterpage:Right0 XVC24S_01.book Page 9 Monday, February 28, 2005 9:24 AM EN INDEX 9 Front View A B H I C J A Power Button (POWER) 墌 pg. 15, 17, 29, 56 B VHS Cassette Loading Slot C VCR/DVD Button 墌 pg. 26, 31, 40, 50 D Stop Button (8 STOP) 墌 pg. 26, 31, 40, 50 E Disc Tray 墌 pg. 8 F Play Button (4 PLAY) 墌 pg. 26, 31, 40, 50, 56 G DVD Open/Close Button (x OPEN/CLOSE) 墌 pg. 8, 40, 50 H VHS Eject Button (x EJECT) 墌 pg.
Filename [XVC24S_06Index.fm] Masterpage:Left+ XVC24S_01.book Page 10 Monday, February 28, 2005 9:24 AM 10 EN INDEX (cont.) Rear View A B C E F G A Region Number Label 墌 pg. 7 B AC Power Cord 墌 pg. 13, 14 C Audio/Video Output Connectors (AUDIO/ VIDEO OUTPUT) 墌 pg. 13, 14, 53 D Antenna Input Connector (VHF/UHF IN) 墌 pg. 13, 14 D H E Digital Audio Output Connector (DIGITAL AUDIO OUT)* 墌 pg. 55 F Component Video Output Connectors (COMPONENT VIDEO OUT)* 墌 pg.
Filename [XVC24S_06Index.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 11 Monday, February 28, 2005 9:24 AM EN 11 On-Screen Display (VCR deck) If you press ON SCREEN on the Remote when “SUPERIMPOSE” is set to “ON” (墌 pg. 59), various operational indicators appear on the TV screen. For On-screen display for DVD deck, refer to “Using the on-screen bar” (墌 pg. 47). A B C D E F G H I J K L F Audio Mode Display 墌 pg.
Filename [XVC24S_06Index.fm] Masterpage:Left+ XVC24S_01.book Page 12 Monday, February 28, 2005 9:24 AM 12 EN INDEX (cont.) Remote A B C D V W X E F Y Z G H a I J K L M N O b c d e f g h i j k l m P Q R S T U n Buttons with a small dot on the left side of the name (TV POWER (1), TV/VCR, TV VOL+/–, TV CH +/–, MUTE) can also be used to operate a JVC’s TV after setting the TV/VCR/ DVD switch to the left. A TV Power Button (TV POWER) 墌 See above. B TV/VCR/DVD switch 墌 pg.
Filename [XVC24S_06Index.fm] Masterpage:Right0 XVC24S_01.book Page 13 Monday, February 28, 2005 9:24 AM EN INSTALLING YOUR NEW UNIT Basic Connections 13 C Connect the unit to TV. The connection method you use depends on the type of TV you have. Antenna or Cable RF Connection Coaxial cable Flat feeder Matching transformer (not supplied) 8 To connect to a TV with NO AV input connectors — A Disconnect the TV antenna from the TV.
Filename [XVC24S_06Index.fm] Masterpage:Left+ XVC24S_01.book Page 14 Monday, February 28, 2005 9:24 AM 14 EN INSTALLING YOUR NEW UNIT (cont.) Component Video Connection (DVD deck only) ATTENTION Be sure to connect the unit’s VIDEO OUTPUT (DVD/ VCR) connector to the TV’s VIDEO input connector. Coaxial cable Flat feeder Matching transformer (not supplied) AC power cord A Connect the unit to TV. A Connect the antenna, unit and TV as per “AV Connection.” (墌 pg.
Filename [XVC24S_06Index.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 15 Monday, February 28, 2005 9:24 AM EN Scan Mode Set A Turn on the unit. (DVD deck only) B Select the DVD deck. Press POWER. This unit supports the progressive scan system (eg. 480p*) as well as the conventional interlaced scan system (eg. 480i*). If your TV equipped with component video connectors supports the progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active.
Filename [XVC24S_06Index.fm] Masterpage:Left0 XVC24S_01.book Page 16 Monday, February 28, 2005 9:24 AM 16 EN INITIAL SETTINGS Plug & Play Set Auto Clock Set/Auto Tuner Set ATTENTION ● If you use a cable box, Plug&Play will not function; set the clock and tuner channels separately. (墌 pg. 22 – 24) ● Depending on areas or reception conditions, the unit may not receive the Auto clock setting data from the PBS channel.
Filename [XVC24S_06Index.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 17 Monday, February 28, 2005 9:24 AM EN 17 D Select the mode. Monitor Set Press rt to move the highlight to “MONITOR TYPE,” then press ENTER. (DVD deck) PICTURE MONITOR TYPE 4:3LB PICTURE SOURCE AUTO SCREEN SAVER ON FILE TYPE AUDIO You can select the monitor type depending the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. ● Turn on the TV and select the VCR channel (or AV mode).
Filename [XVC24S_06Index.fm] Masterpage:Left+ XVC24S_01.book Page 18 Monday, February 28, 2005 9:24 AM 18 EN INITIAL SETTINGS (cont.) On-screen Language Set (VCR deck) Language This VCR deck offers you the choice to view on-screen messages in 3 different languages. ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Slide to the right. A Turn on the unit. Press POWER. B Select the VCR deck.
Filename [XVC24S_06Index.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 19 Monday, February 28, 2005 9:24 AM EN ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Slide to the right. 19 On-screen Language Set (DVD deck) This DVD deck offers you the choice to view on-screen messages in 3 different languages. You can change the language setting manually as required. A Turn on the unit. POWER Press POWER. B Select the DVD deck.
Filename [XVC24S_06Index.fm] Masterpage:Left+ XVC24S_01.book Page 20 Monday, February 28, 2005 9:24 AM 20 EN INITIAL SETTINGS (cont.) ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Slide to the right. POWER Menu/Audio/Subtitle Language Set (DVD deck only) Some DVD discs contain the DVD menu display, audio, subtitle in the multiple languages. With these discs, you can set the default language as you like.
Filename [XVC24S_06Index.fm] Masterpage:Right 3Column XVC24S_01.
Filename [XVC24S_06Index.fm] Masterpage:Left+ XVC24S_01.book Page 22 Monday, February 28, 2005 9:24 AM 22 EN INITIAL SETTINGS (cont.) Perform clock setting only if the clock has not been set correctly by the Plug&Play setting. Clock Set ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Slide to the right. POWER Preparations A Turn on the unit. Press POWER. B Select the VCR deck.
Filename [XVC24S_06Index.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 23 Monday, February 28, 2005 9:24 AM EN Semiauto Clock Set You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. First follow steps A to E in “Preparations” (墌 pg. 22), then go to the following steps. NOTE: The time set previously will be erased when “AUTO CLOCK,” “HOST CH,” “D.S.T.” or “TIME ZONE” setting is changed. A Set “AUTO CLOCK” to “ON”.
Filename [XVC24S_06Index.fm] Masterpage:Left+ XVC24S_01.book Page 24 Monday, February 28, 2005 9:24 AM 24 EN INITIAL SETTINGS (cont.) Auto Channel Set Tuner Set Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting. ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Slide to the right. POWER A Turn on the unit. Press POWER. B Select the VCR deck.
Filename [XVC24S_06Index.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 25 Monday, February 28, 2005 9:24 AM EN ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Slide to the right. POWER 25 Manual Channel Set You can add the channels you want or delete the channels you do not want manually. A Turn on the unit. Press POWER. B Select the VCR deck.
Filename [XVC24S_07S-VHS.fm] Masterpage:Left0 XVC24S_01.book Page 26 Monday, February 28, 2005 9:24 AM 26 EN OPERATIONS ON VCR DECK A Load a cassette. Basic Playback ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Load a cassette. VCR/DVD 7 STOP 3 PLAY Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit.
Filename [XVC24S_07S-VHS.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 27 Monday, February 28, 2005 9:24 AM EN Playback Features ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. 3 PLAY CH +/– 27 Still Picture/Frame-By-Frame Playback 1 Pause during playback. Press 9 PAUSE. ● If there is vertical jitter, press CH +/– on the Remote or on the unit to correct the picture. 2 Activate frame-by-frame playback.
Filename [XVC24S_07S-VHS.fm] Masterpage:Left+ XVC24S_01.book Page 28 Monday, February 28, 2005 9:24 AM 28 EN OPERATIONS ON VCR DECK (cont.) Index Search Slide to the right. Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the unit is in the Stop mode. Activate Index Search. Press 2 INDEX or INDEX 6.
Filename [XVC24S_07S-VHS.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 29 Monday, February 28, 2005 9:24 AM EN POWER EJECT Slide to the right. 7 STOP 3 PLAY 1 REW FF ¡ 29 Next Function Memory The Next Function Memory “tells” the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode. a- For Automatic Start Of Playback Press 3 REW, then press 4 PLAY within 2 seconds. b- For Automatic Power Off Press 3 REW, then press POWER within 2 seconds.
Filename [XVC24S_07S-VHS.fm] Masterpage:Left+ XVC24S_01.book Page 30 Monday, February 28, 2005 9:24 AM 30 EN OPERATIONS ON VCR DECK (cont.) Manual Tracking Slide to the right. A.MONITOR Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TRACKING +/– buttons. 1 Override automatic tracking. During playback, press TRACKING + and – at the same time. 2 Adjust the tracking manually.
Filename [XVC24S_07S-VHS.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 31 Monday, February 28, 2005 9:24 AM EN A Load a cassette. Basic Recording Insert a cassette with the record safety tab intact. ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switchon the Remote to the right. Load a cassette. 31 VCR/DVD 7 STOP 3 PLAY ● The unit’s power comes on automatically and the counter is reset to 0:00:00. B Select the VCR deck.
Filename [XVC24S_07S-VHS.fm] Masterpage:Left+ XVC24S_01.book Page 32 Monday, February 28, 2005 9:24 AM 32 EN OPERATIONS ON VCR DECK (cont.) Recording Features ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Record One Program While Watching Another If your unit is connected to the TV via the AV connection, press TV/VCR. The VCR indicator on the front display panel and the TV broadcast being recorded disappear.
Filename [XVC24S_07S-VHS.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 33 Monday, February 28, 2005 9:24 AM EN 33 Elapsed Recording Time Indication Slide to the right. 1 Set the counter display. Press DISPLAY until a counter reading appears on the front display panel. C.RESET 2 Reset the counter. ON SCREEN Press C.RESET before starting recording or playback. ● The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs.
Filename [XVC24S_07S-VHS.fm] Masterpage:Left+ XVC24S_01.book Page 34 Monday, February 28, 2005 9:24 AM 34 EN OPERATIONS ON VCR DECK (cont.) Example: To timer-record the program from 8:00 PM to 10:00 PM on 24th December, on channel 12. Express Timer Programing A Select the VCR deck. Before performing Express Timer Programing: ● Make sure that the unit’s built-in clock is set properly. ● Insert a cassette with the safety tab in place. The unit will come on automatically.
Filename [XVC24S_07S-VHS.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 35 Monday, February 28, 2005 9:24 AM EN F Enter the channel position. Press CH +/–. G Set the tape speed. Press SP/EP. H Return to the normal screen. Press PROG or ENTER. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears on the TV screen, see page 38.
Filename [XVC24S_07S-VHS.fm] Masterpage:Left+ XVC24S_01.book Page 36 Monday, February 28, 2005 9:24 AM 36 EN Slide to the right. OPERATIONS ON VCR DECK (cont.) Check, cancel and change programs POWER A Disengage the timer mode. Press TIMER, then press POWER. B Access the Program Check screen. Press PROG. CHECK. PROG. CHECK TIMER C Access the Program screen. Press PROG. CHECK again to check more information. Each time you press PROG. CHECK, the next program’s information appears.
Filename [XVC24S_07S-VHS.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 37 Monday, February 28, 2005 9:24 AM EN To cancel or change a program Slide to the right. D Cancel or change a program. DAILY CANCEL WEEKLY DATE +/– START +/– CH +/– STOP +/– TIMER SP/EP Page 37 37 PROG. CHECK Press CANCEL to cancel a program. To change program settings, press the appropriate button: START +/–, STOP +/–, DATE +/–, CH +/–, DAILY (number key “8”), WEEKLY (number key “9”) and/or SP/EP.
Filename [XVC24S_07S-VHS.fm] Masterpage:Left+ XVC24S_01.book Page 38 Monday, February 28, 2005 9:24 AM 38 EN OPERATIONS ON VCR DECK (cont.) When programs overlap each other Slide to the right. DAILY If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking.
Filename [XVC24S_07S-VHS.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 39 Monday, February 28, 2005 9:24 AM EN Satellite Auto Recording 39 ATTENTION This function allows you to automatically record a satellite program which is timer-programed on your external DBS receiver. Connect a DBS receiver to the unit’s AUDIO/VIDEO input (F-1) connector and program the timer on the DBS receiver. The unit starts or stops recording by the signals input from the DBS receiver.
Filename [XVC24S_08DVD.fm] Masterpage:Left XVC24S_01.book Page 40 Monday, February 28, 2005 9:24 AM 40 EN OPERATIONS ON DVD DECK A Load the disc. Basic Playback ● For details, refer to “Placing a Disc” (墌 pg. 8). B Select the DVD deck. ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. OPEN/CLOSE Load a disc. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up on the front display panel.
Filename [XVC24S_08DVD.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 41 Monday, February 28, 2005 9:24 AM EN Playback Features ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Locating a desired scene using the DVD menu DVD VIDEO discs generally have their own menus which show the disc contents. These menus contain various items such as titles of movies, names of songs, or artist information, and display them on the TV screen.
Filename [XVC24S_08DVD.fm] Masterpage:Left+ XVC24S_01.book Page 42 Monday, February 28, 2005 9:24 AM 42 EN OPERATIONS ON DVD DECK (cont.) Still Picture/Frame-By-Frame Playback Slide to the right. 1 Pause during playback. Press 9 PAUSE. REPEAT ZOOM ON SCREEN 2 Activate frame-by-frame playback. Press 9 PAUSE to advance a still picture. ● To resume normal playback, press 4 PLAY.
Filename [XVC24S_08DVD.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 43 Monday, February 28, 2005 9:24 AM EN Repeat Playback A-B Repeat Playback You can repeat playback as you like according to the type of disc. DVD VIDEO: during playback Audio CD: during playback or in stop mode Video CD/SVCD: in stop mode or during playback with PBC deactivated You can repeat the desired part. 1 Access the repeat mode. 2 Select menu item. Press REPEAT. ● Repeat mode is displayed on the TV.
Filename [XVC24S_08DVD.fm] Masterpage:Left+ XVC24S_01.book Page 44 Monday, February 28, 2005 9:24 AM 44 EN OPERATIONS ON DVD DECK (cont.) Example: To play back from a point 2 (hours): 34 (minutes): 08 (seconds) elapsed Slide to the right. A.
Filename [XVC24S_08DVD.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 45 Monday, February 28, 2005 9:24 AM EN 45 Angle Selection Audio Language and Sound Selection You can enjoy a variety of scene angles if the DVD VIDEO disc contains “multi-angle” parts, where multiple cameras were used to shoot the same scene from different angles. ● During playback The audio selection setting allows you to change the audio language of a movie, or to listen to karaoke with or without the vocal.
Filename [XVC24S_08DVD.fm] Masterpage:Left+ XVC24S_01.book Page 46 Monday, February 28, 2005 9:24 AM 46 EN OPERATIONS ON DVD DECK (cont.) 2 Select the VFP mode. Slide to the right. Press w e repeatedly. ● Each time you press w e, the VFP mode changes as follows: NORMAL]CINEMA]USER 1]USER 2](Back to the beginning) ENTER NORMAL: Select this normally. CINEMA: Suitable for movie. USER 1/ USER 2: You can adjust parameters that affect picture appearance and store settings. Go to step 3.
Filename [XVC24S_08DVD.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 47 Monday, February 28, 2005 9:24 AM EN 47 Basic operation on the on-screen bar Using the onscreen bar During playback A Access the on-screen bar. Press ON SCREEN twice. The on-screen bar appears on the TV screen. ● The currently selected item is highlighted. You can check disc information while the disc is loaded and you can use some functions using the on-screen bar.
Filename [XVC24S_08DVD.fm] Masterpage:Left+ XVC24S_01.book Page 48 Monday, February 28, 2005 9:24 AM 48 EN OPERATIONS ON DVD DECK (cont.) Menu Bar Functions for DVD VIDEO Time mode selection 8 During playback, selects the time mode shown in the status bar and on the front display. ● TOTAL: Current title elapsed time ● T.
Filename [XVC24S_08DVD.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 49 Monday, February 28, 2005 9:24 AM EN MP3/JPEG Files Playback Outline This unit can play back MP3 and JPEG files on a personally recorded on CD-R/RW and commercially available CD disc. ● This unit may be unable to play back the disc due to the characteristics or recording conditions. Precautions About files and folders (groups) on the disc ● This unit can recognize up to 99 groups and up to 150 files per group.
Filename [XVC24S_08DVD.fm] Masterpage:Left+ XVC24S_01.book Page 50 Monday, February 28, 2005 9:24 AM 50 EN OPERATIONS ON DVD DECK (cont.) Basic Playback When you insert a disc with groups and files, the control display that shows the contents of the disc automatically appears on the TV screen. (墌 pg. 49) You can specify and play back the desired group/file from the control display using the following procedure. ● Turn on the TV and select the VCR channel (or AV mode).
Filename [XVC24S_08DVD.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 51 Monday, February 28, 2005 9:24 AM EN 51 Group/File Selection Repeat Playback To start playback by specifying the group/file number A Press the number keys (0-10, +10) to enter the group number. B Press the number keys (0-10, +10) to enter the file number. You can repeat playback of the current group, file (only for MP3 files), or all groups.
Filename [XVC24S_09Editing.fm] Masterpage:Left0 XVC24S_01.book Page 52 Monday, February 28, 2005 9:24 AM 52 EN EDITING (VCR DECK) You can use a camcorder as the source player and your unit as the recording deck. Edit From A Camcorder A Make connections. Slide the TV/VCR/DVD switch on the Remote to the right. Connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the unit’s front panel AUDIO and VIDEO input connectors.
Filename [XVC24S_09Editing.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 53 Monday, February 28, 2005 9:24 AM EN Edit To Or From Another Video Recorder A TV receiver Player Your unit 53 You can use your unit as the source player or as the recording deck. Slide the TV/VCR/DVD switch on the Remote to the right. A Make connections. A When using your unit as the source player ... ... connect its AUDIO/VIDEO OUTPUT connectors to the audio/video input connectors on another recorder.
Filename [XVC24S_09Editing.fm] Masterpage:Left+ XVC24S_01.book Page 54 Monday, February 28, 2005 9:24 AM 54 EN EDITING (VCR DECK) (cont.) Dubbing You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish. However, it is not possible to dub the copy-protected disc. In such case, “Err” appears on the front display panel. (from DVD to VCR) A Load a cassette and place a disc. ● Turn on the TV and select the VCR channel (or AV mode).
Filename [XVC24S_09Editing.fm] Masterpage:Right XVC24S_01.book Page 55 Monday, February 28, 2005 9:24 AM EN EDITING (DVD DECK) 55 You can dub selected audio from the DVD or Audio CD disc to a MD etc. However, it is not possible to dub the copy-protected disc. Digital Audio Dubbing Example: Dubbing to a MD A Make connections. ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right.
Filename [XVC24S_09Editing.fm] Masterpage:Left0 XVC24S_01.book Page 56 Monday, February 28, 2005 9:24 AM 56 EN REMOTE Remote Control Functions Remote A/B/C/D Code Switching The Remote is capable of controlling four JVC video units independently. Each of units can respond to one of four codes (A, B, C or D). The remote control is preset to send A code signals because your unit is initially set to respond to A code signals. You can easily modify your unit to respond to B, C or D code signals.
Filename [XVC24S_09Editing.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 57 Monday, February 28, 2005 9:24 AM EN 57 Connecting To A Dolby Digital Decoder or An Amplifier With A Built-in DTS (DVD deck only) These instructions enable you to connect your unit to dolby digital decoder or amplifier with a built-in DTS. DIGITAL AUDIO OUT Back of unit To DIGITAL AUDIO input Dolby Digital decoder or amplifier with a built-in DTS Coaxial cable (not supplied) Make connections.
Filename [XVC24S_10Subsidiary.fm] Masterpage:Left XVC24S_01.book Page 58 Monday, February 28, 2005 9:24 AM 58 EN SUBSIDIARY SETTINGS You can change various mode settings on the Function Set screen by following the procedure described below. ● For each mode setting, see pages 59 to 60. Mode Set A Turn on the unit. (VCR deck) Press POWER. ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Slide to the right.
Filename [XVC24S_10Subsidiary.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 59 Monday, February 28, 2005 9:24 AM EN 59 * The default setting is bold in the table below. 8 PICTURE CONTROL NORM EDIT SOFT SHARP This feature helps you to adjust the playback picture quality according to your preference. Normally select “NORM.” Picture quality is adjusted automatically. NORM: EDIT: Minimizes picture degradation during editing (recording and playback).
Filename [XVC24S_10Subsidiary.fm] XVC24S_01.book Page 60 Monday, February 28, 2005 9:24 AM 60 EN Masterpage:Left+ SUBSIDIARY SETTINGS (cont.) * The default setting is bold in the table below. 8 VIDEO STABILIZER ON OFF When this function is set to “ON,” you can automatically correct vertical vibration in the picture when playing back unstable recordings made on another recorder. NOTES: ● When you finish viewing a tape, be sure to set this function to “OFF.
Filename [XVC24S_10Subsidiary.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 61 Monday, February 28, 2005 9:24 AM EN ● The procedure shows how to set “RESUME” to “ON” on the DVD Set Up menu screen as an example. Mode Set A Turn on the unit. (DVD deck) Press POWER. ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Slide to the right. 61 POWER B Select the DVD deck.
Filename [XVC24S_10Subsidiary.fm] XVC24S_01.book Page 62 Monday, February 28, 2005 9:24 AM 62 EN SUBSIDIARY SETTINGS (cont.) Picture Settings 8 MONITOR TYPE 16:9 4:3 LB 4:3 PS 8 PICTURE SOURCE AUTO FILM VIDEO 8 SCREEN SAVER ON OFF 8 FILE TYPE AUDIO STILL PICTURE Masterpage:Left+ * The default setting is bold in the table below. You can select the monitor type depending the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs.
Filename [XVC24S_10Subsidiary.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 63 Monday, February 28, 2005 9:24 AM EN 8 DOWN MIX DOLBY SURROUND STEREO 8 D. RANGE COMPRESSION AUTO ON 63 Set to the appropriate mode according to your audio system when you play back a DVD VIDEO disc recorded with surround multichannel audio. This setting affects only the analog audio output signal from the AUDIO OUTPUT connectors (DVD) when playing back a DVD VIDEO disc recorded with surround multichannel audio.
Filename [XVC24S_10Subsidiary.fm] Masterpage:Left+ XVC24S_01.book Page 64 Monday, February 28, 2005 9:24 AM 64 EN SUBSIDIARY SETTINGS (cont.) Others Settings 8 RESUME ON OFF * The default setting is bold in the table below. When this function is set to “ON,” you can use the resume function. (墌 pg. 40) ON: The unit resumes playback from the position where playback has been stopped. OFF: This function is deactivated. NOTE: This function is not available for Audio CDs and MP3 discs.
Filename [XVC24S_11Trouble.fm] Masterpage:Right XVC24S_01.book Page 65 Monday, February 28, 2005 9:24 AM EN TROUBLESHOOTING 65 Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your unit off for repair. Power SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. No power is supplied to the unit. ● The AC power cord is disconnected. Connect the AC power cord. 2.
Filename [XVC24S_11Trouble.fm] Masterpage:Left+ XVC24S_01.book Page 66 Monday, February 28, 2005 9:24 AM 66 EN TROUBLESHOOTING (cont.) Playback (DVD deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The button do not work. ● The operation is prohibited on the placed disc. 2. The DVD deck can not be operated. ● The DVD deck is not selected. 3. “X” appears on the TV screen. ● The operation is prohibited on the placed disc. 4. “REGION CODE ERROR!” appears on the TV screen.
Filename [XVC24S_11Trouble.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 67 Monday, February 28, 2005 9:24 AM EN 67 MP3/JPEG Files Playback (DVD deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION ● No MP3/JPEG files are recorded to the disc. Replace the disc. ● Files do not have the correct file extension in their file names. Add correct file extension (.mp3, .MP3, .jpg, .jpeg, .JPG, .JPEG, or any uppercase and lowercase combination) to their file names.
Filename [XVC24S_11Trouble.fm] Masterpage:Left+ XVC24S_01.book Page 68 Monday, February 28, 2005 9:24 AM 68 EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION ● The timer is engaged but there’s no cassette loaded. Load a cassette with the record safety tab intact. ● The loaded cassette has had its record safety tab removed. Remove the cassette and cover the hole with adhesive tape, or insert a cassette with the record safety tab intact. 4.
Filename [XVC24S_11Trouble.fm] Masterpage:Right-No-Heading XVC24S_01.book Page 69 Monday, February 28, 2005 9:24 AM EN 69 OTHER PROBLEMS SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The image of TV broadcast appears distorted on the TV screen. ● The unit leaves turned on and the DVD deck is selected. Turn off the unit, or press VCR to select the VCR deck, then press TV/VCR so that the VHS indicator disappears from the front display panel. 2.
Filename [XVC24S_11Trouble.fm] Masterpage:Left0 XVC24S_01.book Page 70 Monday, February 28, 2005 9:24 AM 70 EN QUESTIONS AND ANSWERS PLAYBACK TIMER RECORDING Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. “䡬” and “#” remain lit on the front display panel. Is there a problem? A. No. This is a normal condition for a timer recording in progress. Q.
Filename [XVC24S_11Trouble.fm] Masterpage:Right0 XVC24S_01.book Page 71 Monday, February 28, 2005 9:24 AM EN SPECIFICATIONS GENERAL TUNER Power requirement : AC 120 V , 60 Hz Power consumption Power on : 25 W Power off : 2.0 W Temperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (WxHxD) : 435 mm x 93 mm x 272 mm Weight : 4.1 kg Format : VHS NTSC standard Maximum recording time (SP) : 210 min.
Filename [XVC24S_12IX.fm] Masterpage:Left0 XVC24S_01.book Page 72 Monday, February 28, 2005 9:24 AM 72 EN LIST OF TERMS A M A-B Repeat Playback ............................................ 43 About Discs Placing a Disc .................................................. 8 Playable Discs .................................................. 7 Region Number ................................................ 7 Unplayable Discs .............................................. 7 Angle Selection ...................
Filename [XVC24S_12IX.fm] XVC24S_01.book Page 73 Monday, February 28, 2005 9:24 AM Masterpage:Right-NoTitle0 EN 73 S Satellite Auto Recording ........................................ 39 Scan Mode Set (DVD deck only) ............................ 15 Second Audio Recording ....................................... 33 Semiauto Clock Set ............................................... 23 Skip Search ......................................................... 28 Slow Motion .......................................
Filename [Memo_pg74&75.fm] Memo_pg74&75.
Filename [Memo_pg74&75.fm] Memo_pg74&75.
Filename [EN_XVC24S_Cov4.fm] EN_XVC24S_Cov4.