DVD Player & Video Cassette Recorder Instructions
Filename [XVS44UJ_09Editing.fm]
Masterpage:Left+
68
EN
Page 68 27 August 2003 2:00 pm
EDITING (VCR DECK) (cont.)
Dubbing 
(from DVD to VCR)
You can dub selected scenes from the DVD disc to a cassette, 
starting and stopping wherever you wish.
However, it is not possible to dub the copy-protected disc.
In such case, “ERROR” appears on the front display panel.
A
Load a cassette and place a disc.
For the VCR deck
Insert a cassette with the record safety tab intact.
For the DVD deck
A
Press 
OPEN/CLOSE
 (
x
) on the DVD deck to open the 
disc tray.
B
Place the disc in the disc tray. 
C
Press 
OPEN/CLOSE
 (
x
) on the DVD deck to close the 
disc tray.
B
Prepare the VCR deck for dubbing.
A
Press 
VCR
.
B
Press 
SP/EP
 to select recording speed.
C
Search for the point where you want to start dubbing 
by pressing 
PLAY
 (
4
), 
FF
 (
5
) or 
REW
 (
3
) then 
press 
STOP
 (
8
).
C
Prepare the DVD deck for dubbing.
A
Press 
DVD
.
B
Search for the point where you want to start dubbing 
by pressing 
PLAY
 (
4
), 
FF
 (
5
) or 
REW
 (
3
).
C
Press 
PAUSE
 (
9
) to pause playback a little before the 
start point.
D
Start dubbing.
Press and hold 
REC
 (
7
), then press 
PLAY
 (
4
) on the 
Remote.
●
“DUB” lights on the front display panel.
E
End dubbing.
Press 
STOP
 (
8
).
●
Be sure to press 
STOP
 (
8
) while the VCR indicator lights up on 
the unit.
●
If you press 
STOP
 (
8
) or 
EJECT
 (
x
) with the DVD deck 
selected, the dubbing stopped, but the opening screen is also 
recorded.
NOTES:
●
You cannot start dubbing when the scan mode is set to the 
progressive mode. Set it to the interlace mode. (
墌
pg. 82)
●
Set “ON SCREEN GUIDE” to “OFF” (
墌
pg. 81) if you do not 
want to record the on-screen display for DVD discs during 
dubbing. 
●
There may be a discrepancy of several seconds between where 
you intend editing to start, and where it actually starts.
●
The superimposed indication during the operation or dubbing 
is not recorded.
●
Set “PICTURE CONTROL” to “EDIT”. (
墌
pg. 74)
●
Turn on the TV and select the VCR channel (or AV 
mode).
●
Slide the 
TV/VCR/DVD
 switch to the right.
XVS44UJ_01.book Page 68 Wednesday, August 27, 2003 2:01 PM










