Filename [XV48EK_02Cov1.fm] XV48EK_01.
Filename [XV48EK_03Safety.fm] Masterpage:Left0 XV48EK_01.book Page 2 Thursday, November 18, 2004 10:45 PM 2 Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION 8 When you are not using the unit for a long period of time, it is recommended that you disconnect the power cord from the mains outlet. 8 Dangerous voltage inside.
Filename [XV48EK_03Safety.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 3 Thursday, November 18, 2004 10:45 PM When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear.) When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.
Filename [XV48EK_03Safety.fm] Masterpage:Left0 XV48EK_01.book Page 4 Thursday, November 18, 2004 10:45 PM 4 SAFETY FIRST CONTENTS 2 EDITING (VHS DECK) 44 Safety Precautions ............................................... 2 Some Do’s And Don’ts On The Safe Use Of Equipment ........................................................ 3 Editing from a Camcorder .................................. 44 Editing to or from Another Video Recorder ........ 45 Dubbing (from DVD to VHS) .............................
Filename [XV48EK_05DiscInfo.fm] Masterpage:Right0 XV48EK_01.book Page 5 Thursday, November 18, 2004 10:45 PM 5 DISC INFORMATION Region Number About Discs Playable Discs You can use discs with the following logos for playback only. DVD VIDEO Video CD/Super Video CD The world is divided into 6 regions for DVD VIDEO discs. DVD VIDEO discs are assigned a region number to indicate which region they may be played back in.
Filename [XV48EK_05DiscInfo.fm] Masterpage:Left+ XV48EK_01.book Page 6 Thursday, November 18, 2004 10:45 PM 6 DISC INFORMATION (cont.) File Structure of Discs Care and Handling of Discs DVD VIDEO How to handle discs Typically, DVD VIDEO discs are made up of larger units called “titles.” Each title has a number (title number) that can be used to select desired titles. Titles are further divided into units called “chapters.
Filename [XV48EK_06Index.fm] Masterpage:Right0 XV48EK_01.book Page 7 Thursday, November 18, 2004 10:45 PM 7 INDEX Front View A J B C K D L M STANDBY/ON Button (1) 墌 pg. 12, 18, 40 VCR Indicator 墌 pg. 18, 21 Cassette Loading Slot 墌 pg. 18 VCR/DVD Button 墌 pg. 18, 21, 30, 40 Disc Tray 墌 pg. 30 DVD Indicator 墌 pg. 30 Stop Button (8) 墌 pg. 18, 21, 30, 41, 48 Play Button (4) 墌 pg. 18, 21, 30, 41, 48 DVD Open/Close Button (x) 墌 pg. 30, 41 Cassette Eject Button (x) 墌 pg.
Filename [XV48EK_06Index.fm] Masterpage:Left+ XV48EK_01.book Page 8 Thursday, November 18, 2004 10:45 PM 8 INDEX (cont.) Front Display Panel A B C A VCR Mode Indicator 墌 pg. 21, 22 B Channel/Clock Display Mode Display (L-1, L-2, F-1 or SAT*) * When “L-2 SELECT” is set to “SAT” (墌 pg. 54), “SAT” appears instead of “L-2”. DE C VCR Indicator 墌 pg. 22 D “Timer” Indicator 墌 pg. 25, 26, 29 E Automatic Satellite Programme Recording Indicator (N) 墌 pg. 29 Counter Display Tape Speed (SP/LP) 墌 pg.
Filename [XV48EK_06Index.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 9 Thursday, November 18, 2004 10:45 PM 9 Remote Control A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o Buttons with a small dot on the left side of the name can also be used to operate your JVC TV. (墌 pg. 49) How To Use The remote control can operate most of your unit’s functions, as well as basic functions of TV sets of JVC. (墌 pg. 49) ● Point the remote control toward the receiving window.
Filename [XV48EK_06Index.fm] Masterpage:Left0 XV48EK_01.book Page 10 Thursday, November 18, 2004 10:45 PM 10 INSTALLING YOUR NEW UNIT Check Contents CHECK ALL THE CONTENTS SHOWN BELOW DVD Player and Video Cassette Recorder RF Cable “AA” Batteries (x 2) Infrared Remote Control Unit 4 You are now ready to install your unit. (墌 pg.
Filename [XV48EK_06Index.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 11 Thursday, November 18, 2004 10:45 PM 11 Basic Connections Mains outlet TV aerial cable Mains power cord It’s essential that your unit be properly connected. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED. A Situate the unit. Place the unit on a stable, horizontal surface. B Connect the unit to TV. The connection method you use depends on the type of TV you have.
Filename [XV48EK_06Index.fm] Masterpage:Left0 XV48EK_01.book Page 12 Thursday, November 18, 2004 10:45 PM 12 Auto Set Up Auto Channel Set/Auto Clock Set/ Auto Guide Program Number Set After the 1 button on the unit or remote control is pressed for the first time to power on the unit, the Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.
Filename [XV48EK_06Index.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 13 Thursday, November 18, 2004 10:45 PM 13 Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set If you have connected the unit to your TV via the AV connection (墌 pg. 11), the unit will automatically perform Preset Download instead of the Auto Set Up in step B on page 12. After downloading, the unit sets the clock and Guide Program numbers automatically. A Turn on the unit.
Filename [XV48EK_06Index.fm] Masterpage:Left+ XV48EK_01.book Page 14 Thursday, November 18, 2004 10:45 PM 14 INITIAL SETTINGS (cont.) Results of Auto Set Up/Preset Download Appear on the Front Display Panel If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed. Turn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the unit’s memory by using the PR button(s).
Filename [XV48EK_06Index.fm] Masterpage:Right-No-Heading XV48EK_06Index.fm Page 15 Saturday, November 20, 2004 6:56 PM 15 Initial Set Up for DVD Deck When you turn on the DVD deck of the unit for the first time after you purchase, the menu screen for making the initial settings appears on the TV screen. Make the following settings. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. Slide to the right.
Filename [XV48EK_06Index.fm] Masterpage:Left+ XV48EK_01.book Page 16 Thursday, November 18, 2004 10:45 PM 16 Language ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. Slide to the right. INITIAL SETTINGS (cont.) Menu/Audio/Subtitle Language Set (DVD deck only) Some DVD discs contain the DVD menu display, audio, subtitle in multiple languages. With these discs, you can set the default language as you like.
Filename [XV48EK_06Index.fm] Masterpage:Right 3Column XV48EK_01.
Filename [XV48EK_07S-VHS.fm] Masterpage:Left0 XV48EK_01.book Page 18 Thursday, November 18, 2004 10:45 PM 18 Basic Playback ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. OPERATIONS ON VHS DECK A Load a cassette. Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit. ● Do not apply too much pressure when inserting.
Filename [XV48EK_07S-VHS.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 19 Thursday, November 18, 2004 10:45 PM 19 Playback Features ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. ATTENTION In the search, still, slow-motion or frame-by-frame playback mode, ● the picture will be distorted. ● the noise bars will appear. ● there may be a loss of colour. ● you cannot hear the sound.
Filename [XV48EK_07S-VHS.fm] Masterpage:Left+ XV48EK_01.book Page 20 Thursday, November 18, 2004 10:45 PM 20 OPERATIONS ON VHS DECK (cont.) 1 Override automatic tracking. Slide to the right. During playback, press TRACKING + and – at the same time. 2 Adjust the tracking manually. Press TRACKING +/–. ● Press TRACKING + and – at the same time again to return to automatic tracking. NOTE: When a new tape is inserted, the unit enters the automatic tracking mode automatically.
Filename [XV48EK_07S-VHS.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 21 Thursday, November 18, 2004 10:45 PM 21 Basic Recording ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. D Set the tape speed. Press p. The current setting appears on the front display panel or TV screen. Press p again to change the setting while the tape speed is displayed on the TV screen. E Start recording.
Filename [XV48EK_07S-VHS.fm] Masterpage:Left+ XV48EK_01.book Page 22 Thursday, November 18, 2004 10:45 PM 22 Recording Features ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. OPERATIONS ON VHS DECK (cont.) 2 Engage the ITR mode. Press 7 again. “䡬” blinks and “0:30” appears on the front display panel. 3 Set the recording duration. If you want to record for more than 30 minutes, press 7 to extend the time.
Filename [XV48EK_07S-VHS.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 23 Thursday, November 18, 2004 10:45 PM Receiving Stereo and Bilingual Programmes Your unit is equipped with a Digital stereo sound decoder (NICAM) making reception of stereo and bilingual broadcasts possible. When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.
Filename [XV48EK_07S-VHS.fm] Masterpage:Left+ XV48EK_01.book Page 24 Thursday, November 18, 2004 10:45 PM 24 VIDEO Plus+ Timer Programming ® With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognize. Before performing the VIDEO Plus+ Timer Programming: ● Make sure that the unit’s built-in clock is set properly. ● Insert a cassette with the safety tab in place. The unit will come on automatically.
Filename [XV48EK_07S-VHS.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 25 Thursday, November 18, 2004 10:45 PM 25 G Return to the normal screen. Press PROG or ENTER. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. ● Repeat steps B – G for each additional programme. H Engage the unit’s timer mode. Press #. The unit turns off automatically and “#” appears on the front display panel. ● To disengage the timer mode, press # again.
Filename [XV48EK_07S-VHS.fm] Masterpage:Left+ XV48EK_01.book Page 26 Thursday, November 18, 2004 10:45 PM 26 Express Timer Programming If you do not know the PlusCode number for the programme you wish to record, use the following procedure to set your unit to timer-record the programme. Before performing Express Timer Programming: ● Make sure that the unit’s built-in clock is set properly. ● Insert a cassette with the safety tab in place. The unit will come on automatically.
Filename [XV48EK_07S-VHS.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 27 Thursday, November 18, 2004 10:45 PM 27 To Timer-Record Weekly Or Daily Serials: — anytime during steps D through I, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.
Filename [XV48EK_07S-VHS.fm] Masterpage:Left+ XV48EK_01.book Page 28 Thursday, November 18, 2004 10:45 PM 28 Slide to the right. OPERATIONS ON VHS DECK (cont.) C Cancel or change programme setting. To cancel a programme, press & when the Programme screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.
Filename [XV48EK_07S-VHS.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 29 Thursday, November 18, 2004 10:45 PM 29 Before performing the following steps: ● Make sure the satellite receiver is connected to the unit’s L-2 IN/DECODER connector. (墌 pg. 50) ● Programme the timer on the satellite receiver. ● Insert a cassette with the safety tab in place. ● Slide the TV/VCR/DVD switch on the remote control to the right. A Select the VHS deck.
Filename [XV48EK_08DVD.fm] Masterpage:Left0 XV48EK_01.book Page 30 Thursday, November 18, 2004 10:45 PM 30 Basic Playback ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. OPERATIONS ON DVD DECK A Load the disc. ● For details, refer to “Placing a Disc” (墌 pg. 6). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the remote control Press DVD so that the DVD indicator lights up.
Filename [XV48EK_08DVD.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 31 Thursday, November 18, 2004 10:45 PM 31 Playback Features ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. Locating a Desired Scene Using the DVD Menu DVD VIDEO discs generally have their own menus which show the disc contents.
Filename [XV48EK_08DVD.fm] Masterpage:Left+ XV48EK_01.book Page 32 Thursday, November 18, 2004 10:45 PM 32 OPERATIONS ON DVD DECK (cont.) Still Picture/Frame-By-Frame Playback Slide to the right. 1 Pause during playback. Press 9. REPEAT ON SCREEN ZOOM 2 Activate frame-by-frame playback. Press 9 to advance a still picture. ● To resume normal playback, press 4. Slow Motion During playback, press 9, then press 3 for reverse slow motion playback, or 5 for forward slow motion playback.
Filename [XV48EK_08DVD.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 33 Thursday, November 18, 2004 10:45 PM 33 Repeat Playback A-B Repeat Playback You can repeat playback as you like according to the type of disc. DVD VIDEO: during playback or in stop mode Audio CD: during playback or in stop mode Video CD/SVCD: in stop mode or during playback with PBC disactivated You can repeat the desired part.
Filename [XV48EK_08DVD.fm] Masterpage:Left+ XV48EK_01.book Page 34 Thursday, November 18, 2004 10:45 PM 34 OPERATIONS ON DVD DECK (cont.) Example: To play back from a point 2 (hours): 34 (minutes): 08 (seconds) elapsed Slide to the right.
Filename [XV48EK_08DVD.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 35 Thursday, November 18, 2004 10:45 PM 35 Angle Selection Audio Language and Sound Selection You can enjoy a variety of scene angles if the DVD VIDEO disc contains “multi-angle” parts, where multiple cameras were used to shoot the same scene from different angles. ● During playback The audio selection setting allows you to change the audio language of a movie, or to listen to karaoke with or without the vocal.
Filename [XV48EK_08DVD.fm] Masterpage:Left+ XV48EK_01.book Page 36 Thursday, November 18, 2004 10:45 PM 36 OPERATIONS ON DVD DECK (cont.) Examples: ● To select track 5, press the number key “5.” ● To select 25, press the number key “+10,” “+10,” then “5.” ● To select 40, press number key “+10” three times, then “10.” Slide to the right. If you have specified a wrong selection Press rt to move H to the track to be corrected, then press 8. The track is erased and the next programmed tracks move up.
Filename [XV48EK_08DVD.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 37 Thursday, November 18, 2004 10:45 PM 37 Sound Effect Using the Sound Effect function, you can change the sound field. ● This function works only for analog audio output. A Access the selection menu. Press SOUND EFFECT during playback. ● The current setting appears on the TV screen. B Select the Sound Effect mode. Press SOUND EFFECT repeatedly to select the desired mode.
Filename [XV48EK_08DVD.fm] Masterpage:Left+ XV48EK_01.book Page 38 Thursday, November 18, 2004 10:45 PM 38 Using the On-Screen Bar You can check disc information while the disc is loaded and you can use some functions using the on-screen bar. The on-screen bar allows you the various playback operations. Slide to the right. OPERATIONS ON DVD DECK (cont.) Basic Operation on the Menu Bar A Access the menu bar. Press ON SCREEN twice. The menu bar appears on the TV screen.
Filename [XV48EK_08DVD.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 39 Thursday, November 18, 2004 10:45 PM 39 Menu Bar Functions for DVD VIDEO Time mode selection 8 During playback, selects the time mode shown in the status bar and on the front display. ● TOTAL: Current title elapsed time ● T.REM: Current title remaining time ● TIME: Current chapter elapsed time ● REM: Current chapter remaining time Repeat mode (See also page 33) 8 Selects the repeat mode during playback.
Filename [XV48EK_08DVD.fm] Masterpage:Left+ XV48EK_01.book Page 40 Thursday, November 18, 2004 10:45 PM 40 Audio/Video Files Playback Outline This unit can play back MP3 and JPEG files on a personally recorded on CD-R/RW and commercially available CD disc. This unit can also play back DivX files recorded on CD-R/RW and DVD-R/-RW disc. Some DVD-R and DVD-RW discs mastered as multi border (multi-session) may not be compatible with the unit.
Filename [XV48EK_08DVD.fm] Masterpage:Right-No-Heading XV48EK_08DVD.fm Page 41 Tuesday, November 23, 2004 7:18 PM 41 C Load the disc. Zooming ● For details, refer to “Placing a Disc” (墌 pg. 6). ● The Control display appears on the TV. Current playback mode Select these sections to show the upper layer. ● Each time you press ZOOM, the magnification changes: - 2 times for DivX files (available only during playback) - 1.
Filename [XV48EK_08DVD.fm] Masterpage:Left+ XV48EK_01.book Page 42 Thursday, November 18, 2004 10:45 PM 42 OPERATIONS ON DVD DECK (cont.) Slide to the right. Random Playback A Change the playback mode. Press w e to select the current playback mode on the Control display. B Select the random playback mode. Press ENTER repeatedly to select “RANDOM.” C Start Random Playback. Press w e to move the cursor bar to the file column, then press 4.
Filename [XV48EK_08DVD.fm] XV48EK_01.book Page 43 Thursday, November 18, 2004 10:45 PM Masterpage:Right-No-Heading 43 Slide Show Playback (JPEG Files) You can display JPEG files (still pictures) one after another automatically. Press 4 while a JPEG file is selected on the Control display. To keep showing the current picture Press 9 Changing the Picture of the Opening Display You can change and set the opening display to your favorite image. A Play back a JPEG file of your favorite image.
Filename [XV48EK_09Editing.fm] Masterpage:Left0 XV48EK_01.book Page 44 Thursday, November 18, 2004 10:45 PM 44 EDITING (VHS DECK) Editing from a Camcorder A Make connections. You can use a camcorder as the source player and your unit as the recording deck. Slide the TV/VCR/DVD switch on the remote control to the right. Recorder Connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the unit’s front panel AUDIO and VIDEO input connectors.
Filename [XV48EK_09Editing.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 45 Thursday, November 18, 2004 10:45 PM 45 Editing to or from Another Video Recorder You can use your unit as the source player or as the recording deck. A When using your unit as the source player: Player TV Your unit On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the remote control Press VCR so that the VCR indicator lights up. C Set the input mode of recording deck.
Filename [XV48EK_09Editing.fm] Masterpage:Left+ XV48EK_01.book Page 46 Thursday, November 18, 2004 10:45 PM 46 Dubbing (from DVD to VHS) You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish. However, it is not possible to dub copy-protected discs. In such case, “ERROR” appears on the front display panel. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. EDITING (VHS DECK) (cont.
Filename [XV48EK_09Editing.fm] Masterpage:Right0 XV48EK_01.book Page 47 Thursday, November 18, 2004 10:45 PM 47 EDITING (DVD DECK) You can dub selected audio from the DVD or Audio CD disc to an MD etc. However, it is not possible to dub copy-protected discs. Digital Audio Dubbing Example: Dubbing to an MD ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. Recorder Digital audio device (MD deck etc.) A Make connections.
Filename [XV48EK_09Editing.fm] Masterpage:Left0 XV48EK_01.book Page 48 Thursday, November 18, 2004 10:45 PM 48 Remote Control Functions Remote A/B/C/D Code Switching The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (A, B, C or D). The remote control is preset to send A code signals because your unit is initially set to respond to A code signals. You can easily modify your unit to respond to B, C or D code signals.
Filename [XV48EK_09Editing.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 49 Thursday, November 18, 2004 10:45 PM 49 Operating a JVC TV Your remote control can operate the basic functions of your JVC TV set. Slide to the left. the TV/VCR/DVD switch on the A Slide remote control to the left. B Operate the TV. Press the corresponding button: TV 1, TV/VCR, TV % +/– (Volume), TV PR +/–, (TV Muting), number keys. ● For some JVC TVs, you must press ENTER after having pressed the number keys.
Filename [XV48EK_09Editing.fm] Masterpage:Left0 XV48EK_01.book Page 50 Thursday, November 18, 2004 10:45 PM 50 Connecting to a Satellite Receiver Connect the satellite receiver to the L-2 IN/DECODER connector, then connect the L-1 IN/OUT connector to the TV’s connector. SYSTEM CONNECTIONS NOTES: ● Set “L-2 SELECT” to “A/V.” (墌 pg. 54) ● You can use the Automatic Satellite Programme Recording function (墌 pg. 28) with this connection.
Filename [XV48EK_09Editing.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 51 Thursday, November 18, 2004 10:45 PM 51 Connecting to a Dolby Digital Decoder or an Amplifier with a Built-In DTS (DVD deck only) These instructions enable you to connect your unit to a Dolby Digital Decoder or an amplifier with built-in DTS. Make connections. Connect the optical cable between the unit and the Dolby Digital Decoder or amplifier with a built-in DTS.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Left0 XV48EK_01.book Page 52 Thursday, November 18, 2004 10:45 PM 52 Mode Set (VHS deck) You can change various mode settings on the Mode Set screen by following the procedure described below. ● For each mode setting, see pages 53 to 54. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. Slide to the right. SUBSIDIARY SETTINGS A Turn on the unit. Press 1. B Select the VHS deck.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 53 Thursday, November 18, 2004 10:45 PM 53 * The default setting is bold in the table below. 8 B.E.S.T. — ON / OFF You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to “ON” or “OFF.” (墌 pg. 23) NOTES: ● When watching a tape recorded with “B.E.S.T.” set to “ON,” it is recommended that you leave B.E.S.T. on during playback as well.
Filename [XV48EK_10Subsidiary.fm] XV48EK_01.book Page 54 Thursday, November 18, 2004 10:45 PM 54 Masterpage:Left+ SUBSIDIARY SETTINGS (cont.) 8 POWER SAVE — ON / OFF When this function is set to “ON,” you can reduce the power consumption while the unit is turned off. NOTES: ● During Power Save mode: — the front display panel will be turned off. — the Just Clock function (墌 pg. 65) does not work. — the picture may be distorted momentarily when you turn on/off the unit.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 55 Thursday, November 18, 2004 10:45 PM 55 Mode Set (DVD deck) You can change various mode settings on the Mode Set screen by following the procedure described below. ● For each mode setting, see corresponding pages. LANGUAGE MENU LANGUAGE (墌 pg. 16) AUDIO LANGUAGE (墌 pg. 16) SUBTITLE (墌 pg. 16) ON SCREEN LANGUAGE (墌 pg. 15) PICTURE MONITOR TYPE (墌 pg. 15) PICTURE SOURCE (墌 pg. 56) SCREEN SAVER (墌 pg.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Left+ XV48EK_01.book Page 56 Thursday, November 18, 2004 10:45 PM 56 SUBSIDIARY SETTINGS (cont.) * The default setting is bold in the table below. Picture Settings 8 MONITOR TYPE — 16:9 / 4:3 LB / 4:3 PS You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to “Initial Set Up for DVD Deck” (墌 pg. 15).
Filename [XV48EK_10Subsidiary.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 57 Thursday, November 18, 2004 10:45 PM 57 Output Playback discs STREAM/PCM DVD VIDEO with 48 kHz, 16/20/24 bit linear PCM DVD VIDEO with DTS PCM ONLY 48 kHz, 16 bit linear PCM DTS bitstream DVD VIDEO with Dolby Digital 48 kHz, 24 bit stereo linear PCM 48 kHz, 24 bit stereo linear PCM Dolby Digital bitstream Video CD/SVCD/Audio CD Audio CD with DTS DOLBY DIGITAL/PCM 44.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Left+ XV48EK_10Subsidiary.fm Page 58 Tuesday, November 23, 2004 1:08 PM 58 SUBSIDIARY SETTINGS (cont.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 59 Thursday, November 18, 2004 10:45 PM 59 Tuner Set IMPORTANT Perform the following steps only if — — Auto Channel Set has not been set correctly by Auto Set Up or by Preset Download. (墌 pg. 12, 13) — you have moved to a different area or if a new station starts broadcasting in your area. Your unit needs to memorize all necessary stations in channel positions in order to record TV programmes.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Left+ XV48EK_01.book Page 60 Thursday, November 18, 2004 10:45 PM 60 SUBSIDIARY SETTINGS (cont.) NOTES: ● Fine tuning is performed automatically during Auto Channel Set. If you want to perform tuning manually, refer to page 61. ● If you perform Auto Channel Set when the aerial cable is not connected properly, “SCAN COMPLETED –NO SIGNAL–” appears on the TV screen in step E.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 61 Thursday, November 18, 2004 10:45 PM 61 Changing Station Channel Position Perform steps A and B of “Manual Channel Set” on page 60 to access the Confirmation screen before continuing. A Select the item. Press rt w e until the item you want to move begins blinking. Then press ENTER and the station name (ID) and its channel (CH) number begin blinking. B Select the new position.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Left+ XV48EK_01.book Page 62 Thursday, November 18, 2004 10:45 PM 62 SUBSIDIARY SETTINGS (cont.) TV Station and ID List * The “ID” abbreviation is what is shown on-screen in lieu of the station name. The “ID” abbreviation is listed in the Confirmation screen and is displayed on the TV screen when the unit is tuned to a different station.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 63 Thursday, November 18, 2004 10:45 PM 63 TV Station Channel Number Guide Only the main stations are listed. There are in addition many relay stations, and full lists are available from the BBC and ITV. BBC1 BBC2 ITV London & South-East Bluebell Hill.........................40 46 43 Crystal Palace .......................26 33 23 Dover................................... 50 56 66 Heathfield ............................
Filename [XV48EK_10Subsidiary.fm] Masterpage:Left+ XV48EK_01.book Page 64 Thursday, November 18, 2004 10:45 PM 64 Video Channel Set Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the unit through the RF cable. IMPORTANT Perform the following steps only if — — Video Channel Set has not been done correctly by the Auto Set Up function (墌 pg.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 65 Thursday, November 18, 2004 10:45 PM 65 Clock Set ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. Slide to the right. E Set the date and time. Press rt to set the time, then press ENTER or e. The “DATE” display begins blinking. Repeat the same procedure to set the date and year.
Filename [XV48EK_10Subsidiary.fm] Masterpage:Left+ XV48EK_01.book Page 66 Thursday, November 18, 2004 10:45 PM 66 Child Lock You can disable the unit’s operation. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch on the remote control to the right. SUBSIDIARY SETTINGS (cont.) A Set the Child Lock. Press and hold 1 on the remote control for more than 10 seconds while the unit is turned on. The unit turns off, and “CL“ appears on the front display panel.
Filename [XV48EK_11Trouble.fm] Masterpage:Right XV48EK_01.book Page 67 Thursday, November 18, 2004 10:45 PM 67 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your unit off for repair. Noise appears during normal playback. ● The automatic tracking mode is engaged. ]Try manual tracking. (墌 pg.
Filename [XV48EK_11Trouble.fm] Masterpage:Left+ XV48EK_01.book Page 68 Thursday, November 18, 2004 10:45 PM 68 Changing audio/subtitle language is not possible. ● The disc does not contain audio/subtitles in multiple languages. ]With some discs, the language should be set on the disc menu. (墌 pg. 31) The subtitles do not appear on the TV screen. ● The disc does not contain subtitles. ● The subtitle display is set to off. ]Set the subtitles display to on. (墌 pg. 34) ● A-B Repeat Playback is in progress.
Filename [XV48EK_11Trouble.fm] Masterpage:Right-No-Heading XV48EK_01.book Page 69 Thursday, November 18, 2004 10:45 PM 69 Timer Recording (VHS deck) Other Problems Timer recording won’t work. The image of the TV broadcast appears distorted on the TV screen. ● The clock and/or the timer have been set incorrectly. ]Re-perform the clock and/or timer settings. ● The timer is not engaged. ]Press # and confirm that “#” is displayed on the front display panel.
Filename [XV48EK_11Trouble.fm] Masterpage:Left0 XV48EK_01.book Page 70 Thursday, November 18, 2004 10:45 PM 70 SPECIFICATIONS GENERAL VIDEO/AUDIO (DVD deck) Power requirement : AC 220 V – 240 V , 50 Hz/60 Hz Power consumption Power on : 23 W Power off : 4.0 W Temperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 435 mm x 93 mm x 272 mm Weight : 4.3 kg Format : VHS PAL standard Maximum recording time (SP) : 240 min.
Filename [XV48EK_12IX.fm] Masterpage:Right XV48EK_12IX.fm Page 71 Thursday, November 18, 2004 11:24 PM 71 LIST OF TERMS A A-B Repeat Playback ................................................ 33 About Discs Placing a Disc ..................................................... 6 Playable Discs .................................................... 5 Region Number ................................................... 5 Unplayable Discs ................................................ 5 Angle Selection .........
Filename [XV48EK_13Cov4.fm] XV48EK_13Cov4.