HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / All Cover LCT1537-001A-U_Cover.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / All Cover LCT1537-001A-U_Cover.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 1 Friday, September 26, 2003 11:10 AM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: • The main power button on the TV does not fully isolate the TV from the AC supply.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 2 Friday, September 26, 2003 11:10 AM CONTENTS Setting up your TV ...................................3 SOUND menu ......................................... 28 Connecting the aerial and VCR ................. 3 Connecting and placing the woofer unit (HV-36P38SUE only) ............................. 5 Connecting the power cord to the AC outlet.......................................................
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 3 Friday, September 26, 2003 11:10 AM Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and VCR • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. HV-36P38SUE Aerial 75-ohm Coaxial Cable If not connecting a VCR, follow 1.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 5 Friday, September 26, 2003 11:10 AM Setting up your TV Connecting and placing the woofer unit (HV-36P38SUE only) Place the woofer unit within the range of the connection cable. It is recommended that the woofer unit be placed with the speaker facing forwards. ENGLISH Connect the supplied woofer connector to the woofer terminal on the back of the TV.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 6 Friday, September 26, 2003 11:10 AM Setting up your TV Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. Initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the onscreen display to make the initial settings.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 7 Friday, September 26, 2003 11:10 AM Setting up your TV • The JVC logo appeares only once when your TV has been turned on. In this case, use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “SET UP menu” on page 32.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 8 Friday, September 26, 2003 11:10 AM Setting up your TV 6 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV VCR OK EXIT D0005-EN If you do not have a T-V LINK compatible VCR connected: Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 9 Friday, September 26, 2003 11:10 AM Setting up your TV Downloading the data to VCR You can transmit to the latest Programme numbers (PR) data to the VCR with the T-V LINK function. Caution • Only when the T-V LINK compatible VCR is connected to the EXT-2 terminal, this operation is enabled. • Only when the T-V LINK menu is being displayed, this operation is enabled.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 10 Friday, September 26, 2003 11:10 AM Setting up your TV Pre-set Download Download the registered data on the TV channels from the TV to the VCR. The Preset Download function automatically begins when the initial setting is complete or whenever the AUTO PROGRAM or EDIT/ MANUAL operations are performed. • This function can be operated via VCR operation.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 11 Friday, September 26, 2003 11:10 AM TV buttons and functions HV-36P38SUE HV-32P37SUE/HV-28P37SUE ENGLISH EXT- 4 EXT-1 Y Pb L Pr R EXT-2 S P E X T S EXT-3 L S 5 R L AUDIO OUT R S L R P EXT-5 S S L R P EXT-5 P E X T L 5 R Refer to the pages in parentheses for details.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 12 Friday, September 26, 2003 11:10 AM TV buttons and functions Turn the Main power on Press the Main power button on the TV. The Power lamp lights red and your TV is in the standby mode. • If the Power lamp lights green, the TV is already on. To turn the Main power off: Press the Main power button again. The Power lamp goes off. Caution • The main power button on the TV does not fully isolate the TV from the AC supply.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 14 Friday, September 26, 2003 11:10 AM Remote control buttons and functions Choose a TV channel and watch images from external devices • If the picture is tilted, correct it. See “PICTURE TILT” on page 36. Use the number buttons: Enter the programme number (PR) of the channel using the number buttons.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 15 Friday, September 26, 2003 11:10 AM Remote control buttons and functions Adjust the volume Muting the sound Press the l (muting) button to turn off the sound. Pressing the l (muting) button again restores the previous volume level. Information function You can see the channel number of the programme you are watching, the current time or the PR LIST. From the PR LIST, you can choose a channel or EXT terminal.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 16 Friday, September 26, 2003 11:10 AM Remote control buttons and functions ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 17 Friday, September 26, 2003 11:10 AM Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears. 2 Press the a button to display the ZOOM mode indication Indicator is displayed.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 18 Friday, September 26, 2003 11:10 AM Remote control buttons and functions To cancel the FREEZE function: Press the f button, the p p buttons or the number buttons. • The FREEZE function does not work while a sub-picture is displayed. • The still picture cannot be output from the TV. • The FREEZE function does not work for pictures of 625p, 525p and 1125i signals.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 19 Friday, September 26, 2003 11:10 AM Remote control buttons and functions • • • • • To return the multi-picture to one screen: Press the M button, press the 5 buttons to choose one screen, and then press the a button. • Pressing the b button will also return the display to one screen. Operating a JVC brand VCR or DVD player You can operate a JVC brand VCR or DVD player.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 20 Friday, September 26, 2003 11:10 AM Teletext function VCR/TV/ DVD Basic operation You can view three types of teletext broadcasts on the TV: FLOF (Fastext), TOP and WST. 1 Choose a TV channel with a teletext broadcast 2 Set the VCR/TV/DVD switch to the TV position 4 Choose a teletext page by pressing the p p buttons, Number buttons or Colour buttons To return to the TV mode: Press the b button or g (Text) button.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 21 Friday, September 26, 2003 11:10 AM Teletext function 3 Press and hold down A (Store) button The four page numbers blink white to indicate that they are stored in memory. To call up a stored page: Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 22 Friday, September 26, 2003 11:10 AM Teletext function Cancel You can search for a teletext page while watching TV. 1 Press the Number button to enter a page number, or press a Colour button The TV searches for a teletext page. 2 Press H (Cancel) button The TV programme appears. When the TV finds the teletext page, its page number appears in the upper left of the screen.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 23 Friday, September 26, 2003 11:10 AM Using the TV’s menu This TV has a number of functions which you can operate using menus. To fully utilize your TV’s functions, you need to fully understand the basic menu operating techniques. Buttons used to operate the menus Types of menu PICTURE menu Choose to set the screen settings. D0106 SOUND menu Choose to set the sound settings.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 24 Friday, September 26, 2003 11:10 AM PICTURE menu COLOUR PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP. FEATURES STANDARD COOL RESET OK D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. You can adjust the picture colour. 2 : lighter 3 : deeper HUE You can adjust the picture tint.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 25 Friday, September 26, 2003 11:10 AM PICTURE menu FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. > FEATURES AUTO(LOW) AUTO AUTO ON OK D1015-EN DIGITAL VNR The DIGITAL VNR function cuts down the amount of noise in the original picture. You can choose from the four DIGITAL VNR function settings of AUTO(LOW), AUTO(HIGH), MIN and MAX.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 26 Friday, September 26, 2003 11:10 AM PICTURE menu MIN: The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN. • The MIN setting is not suitable for highquality pictures which contain very little noise. MAX: The level of DigiPure effect is set to the maximum.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 27 Friday, September 26, 2003 11:10 AM PICTURE menu AUTO: This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or an EXT terminal. ENGLISH • The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 28 Friday, September 26, 2003 11:10 AM SOUND menu SOUND STEREO/ BASS TREBLE BALANCE HEADPHONE VOLUME 3D CINEMA SOUND OK BALANCE You can adjust the volume balance between the left and right speaker. 2 : turn the left speaker’s volume level up. 3 : turn the right speaker’s volume level up. HEADPHONE VOLUME D0019-EN • Functions in the “SOUND” menu other than “HEADPHONE VOLUME” work for the TV speakers.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 29 Friday, September 26, 2003 11:10 AM FEATURES menu FEATURES SLEEP TIMER CHILD LOCK APPEARANCE BLUE BACK TYPE A ON To cancel the SLEEP TIMER function: Press the 2 button to set a period of time to “OFF”. CHILD LOCK OK SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER. Then press the a or 3 button A Sub-menu of the SLEEP TIMER function appears.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 30 Friday, September 26, 2003 11:10 AM FEATURES menu 3 Press the a button The Sub-menu of CHILD LOCK appears. > CHILD LOCK PR AV 01 02 03 04 05 06 07 08 09 ID BBC1 CH 32 CH CH/CC 31 5 ID NO.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 31 Friday, September 26, 2003 11:10 AM FEATURES menu APPEARANCE Press the 5 button and choose the format in which the channel number is displayed from the three types: TYPE A, TYPE B and TYPE C. You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. ENGLISH BLUE BACK ON: This function is turned on.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 32 Friday, September 26, 2003 11:10 AM SET UP menu EDIT/MANUAL SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE PICTURE TILT DECODER(EXT-2) EXT SETTING ON OK D0029-EN The EDIT/MANUAL functions are divided into two types: editing of the current Programme numbers (PR) (EDIT functions) and manual registration of a TV channel you want to view to the Programme number (PR) (MANUAL function).
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 33 Friday, September 26, 2003 11:10 AM SET UP menu Basic operation 1 Choose EDIT/MANUAL, then press the a or 3 button The EDIT menu appears.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 34 Friday, September 26, 2003 11:10 AM SET UP menu DELETE 1 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) appears on the screen. 2 Press the yellow button to delete the TV channel The TV channel is deleted from the Programme numbers (PR) list.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 35 Friday, September 26, 2003 11:10 AM SET UP menu • When the COUNTRY setting is not FRANCE, use a two-digit CH/CC number. When the COUNTRY setting is FRANCE, use a three-digit CH/CC number.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 36 Friday, September 26, 2003 11:10 AM SET UP menu 5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor: Press the blue or yellow button to finetune the TV channel. If you cannot hear the normal sound even when the picture of the TV channel appears normally: The SYSTEM setting is wrong. Press the 3 button and choose a SYSTEM that has normal sound.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 37 Friday, September 26, 2003 11:10 AM SET UP menu 4 Press the 5 buttons to choose ON An unscrambled picture appears. To cancel the DECODER (EXT-2) function: Press the 5 buttons to choose OFF. 1 Choose EXT SETTING, then press the a or 3 button The EXT SETTING menu appears.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 38 Friday, September 26, 2003 11:10 AM SET UP menu Preparation: • At first, read the Device Instruction Manual and “Additional preparation” on page 40 to connect the device to the TV properly. Second, follow the Device Instruction Manual to set the device so that an S-VIDEO signal (Y/C signal) can be output to the TV.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 39 Friday, September 26, 2003 11:10 AM SET UP menu To erase a name assigned to the EXT terminal: Choose a blank space. 4 Press the a button to complete the setting DUBBING You can choose a signal source to be output from an EXT-2 terminal.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 42 Friday, September 26, 2003 11:10 AM Additional preparation Devices which can output the SVIDEO signal (Y/C signal) such as a S-VHS VCR Connect the device to an EXT terminal other than the EXT-1 terminal. You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal). For details of how to operate the device, see “S-IN (SVIDEO input)” on page 37.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 43 Friday, September 26, 2003 11:10 AM CH/CC numbers When you want to use the INSERT function on page 35, find the CH/CC number corresponding to the Channel number of the TV channel from this table.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 44 Friday, September 26, 2003 11:10 AM CH/CC numbers • When two CH/CC numbers correspond to one Channel number, choose either one according to the current COUNTRY setting. When the COUNTRY setting is other than FRANCE, choose a two-digit CH/CC number. When the COUNTRY setting is FRANCE, choose a three-digit CH/ CC number.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 45 Friday, September 26, 2003 11:10 AM Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 46 Friday, September 26, 2003 11:10 AM Troubleshooting • Has COLOUR or BRIGHT been controlled properly? Follow the description “BRIGHT” or “COLOUR” on page 24 to try to adjust them properly. • Videotaping teletext is not recommended because it may not record correctly. • When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it were coloured.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.book Page 47 Friday, September 26, 2003 11:10 AM Troubleshooting ENGLISH • It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a malfunction. This is the time required for the image to stabilize before it can be displayed. • The TV may emit a crackling sound due to a sudden change in temperature.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English Body_Eng.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English HV-36P38SUE_Eng.
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / All Cover LCT1537-001A-U_Cover.