Color Television Users Guide For Models: AV-20F476 AV-27F476 AV-32F476 Illustration of AV-32F476 and RM-C1258G Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the carton and original packaging for future use.
Important Safety Precautions CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY STAR®” guidelines for energy efficiency. Important Safeguards CAUTION: Please read and retain for your safety. Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential electrical shock or fire hazards.
7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
PORTABLE CART WARNING (Symbol provided by RETAC) 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges. 14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV set and cart combination to overturn.
Table of Contents Quick Setup . . . . . . . . . . . 7 Clock Timers . . . . . . . . . . 38 Unpacking your TV . . . . . . . . . . . . 7 TV Models . . . . . . . . . . . . . . . . 8 TV Remote Control . . . . . . . . . . . 9 Getting Started . . . . . . . . . . . . . 10 The Remote Control . . . . . . . . . . 10 Connecting Your Devices . . . . . . . 11 Interactive Plug In Menu . . . . . . . . 15 Set Clock . . . . . . . . . . . . . . . . 38 On/Off Timer . . . . . . . . . . . . . . . 39 World Clock . . . . . . .
Quick Setup Unpacking Your TV Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: 1 Television 1 Remote Control AA Alkaline POWER AA Alkaline TV CATV VCR DVD Two AA Batteries INPUT DISPLAY 1 2 4 5 7 8 100+ 0 SLEEP TIMER SOUND VIDEO STATUS 3 6 9 RETURN+ THEATER PRO ASPECT MUTING C.C.
Quick Setup TV Models NOTE: Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television.
Quick Setup TV Remote Control TV CATV VCR DVD POWER INPUT DISPLAY SLEEP TIMER SOUND 1 2 3 4 5 6 7 8 100+ VIDEO STATUS 9 RETURN+ 0 THEATER PRO ASPECT MUTING C.C. CH + VOL + VOL – CH – EXIT MENU VCR CHANNEL PREV NEXT VCR/DVD POWER TV/VCR REW PLAY FF REC STOP PAUSE OPEN/CLOSE STILL/PAUSE RM-C1258G TV RM-C1258G MODELS: AV-20F476 AV-27F476 AV-32F476 • For information on remote control buttons, see pages 41 - 46.
Quick Setup Getting Started Getting Started These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. Step 1 – The Remote Control Before you can operate your remote control, you first need to install the batteries (included). Lift and pull the latch on the back of the remote control to open.
Quick Setup Connections Step 2 – Connecting Your Devices Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV. A VCR is not necessary for operation of the television.
Quick Setup Connections Diagram #1 Illustration of AV-32F476 TV Rear Panel R Cable or Antenna Output AUDIO VIDEO S VIDEO L MONO OVER INPUT 1 INPUT 2 COMPONENT VIDEO Coaxial Cable 75Ω (VHF / UHF) Video/Y L R OR PB AUDIO OUT PR OUT IN Cable Box Note: • If you do not have a cable box, connect the cable wire from the wall outlet into the back of the TV.
Quick Setup Connections Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables.
Quick Setup Connections Connecting to a Camcorder You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 3) located under the front panel door. To access, pull on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions.
Quick Setup Plug-In Menu Step 3 – The Interactive Plug In Menu When you turn your television on for the first time the interactive plug-in menu will appear. The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear. • Setting the TV’s clock to the correct time so your timer functions will work properly. You can choose “AUTO” or “MANUAL” for setting the clock.
Quick Setup Plug-In Menu Auto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal: INTERACTIVE PLUG IN MENU> SET CLOCK MODE TIME TIME ZONE D.S.T.
Quick Setup Plug-In Menu Auto Tuner Setup In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
Remote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. Cable Box or Satellite Codes The remote control is programmed with cable box and satellite codes for power on/off, channel up/down, and 10 key operation.
Remote Programming VCR Codes The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad. 4) Release the DISPLAY button, and confirm the operation of the VCR.
Remote Programming DVD Codes The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad.
Remote Programming Search Codes Cable/Satellite Search Codes Function 1) Slide the first 2-Way Mode Selector switch to CATV. 2) Press and hold down the POWER button, then press the RETURN+ button for more than three seconds. 3) Release the RETURN+ button, then release the POWER button. 4) Press the POWER button on the remote, and see if the cable or satellite box responds. 5) If there was a response, press RETURN+. The codes are now set. If there was no response, repeat Step 4.
Onscreen Menus Using the Guide Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are: π† Up and Down arrows mean press the CH+ or CH– buttons.
Onscreen Menus The Onscreen Menu System Your television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly. Examples of the Onscreen Menus are shown below. Detailed explanations on using each menu follow later in this guide. For information about the interactive plug-in Menu, see pages 15 - 17.
Initial Setup Auto Tuner Setup The auto tuner setup function is described on page 17 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below. Press the MENU button π† √® √® † √® INITIAL SETUP> AUTO TUNER SETUP To AUTO TUNER SETUP To operate To choose CABLE or AIR To move to START To start Auto Tuner Setup TUNER MODE CABLE START BY SELECT OPERATE BY EXIT BY EXIT Programming will take approximately 1 to 2 minutes.
Initial Setup Channel Guard Message When a viewer attempts to watch a guarded channel, the following message appears: To watch a channel that you have locked, enter the Lock Code using the 10 key pad. If the wrong code is entered, the message “INVALID LOCK CODE!” will flash on the screen. The channel cannot be accessed until the correct code is entered. THIS CHANNEL IS LOCKED BY CHANNEL GUARD. PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT. NO.
Initial Setup Unrated Programs Unrated programming refers to any programming which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed in the “Unrated Programming” category.
Initial Setup US V-Chip Ratings U.S. PARENTAL RATING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6. ❒ TV Y7 is for Older Children Most parents would find such programs suitable for children 7 and above. These programs may contain some mild fantasy violence or comedic violence, which children should be able to discern from reality.
Initial Setup Setting US V-Chip Ratings Press the MENU button π† √® To V-CHIP To operate (lock icon appears) Press ZERO to access the V-Chip menu √® π† √® To turn V-Chip ON or OFF To move to SET US TV RATINGS To operate INITIAL SETUP> V–CHIP V–CHIP OFF S E T U S T V R AT I N G S S E T M O V I E R AT I N G S S E T C A N A D I A N R AT I N G S E N G S E T C A N A D I A N R AT I N G S F R E U N R AT E D VIEW FINISH BY SELECT O P E R AT E B Y EXIT BY EXIT Directions to set US V-Chip Ratings Line up t
Initial Setup Movies Ratings ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MPAA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released. NR (Not Rated) Programming may contain all types of programming including children’s programming, foreign programs, or adult material.
Initial Setup Canadian V-Chip Ratings ❒ E – Exempt Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. ❒ C – Programming Intended for Children Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature.
Initial Setup Set Lock Code Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset with a lock code of “0000”. You may change the code to any four-digit number you wish. To change the lock code, follow the steps below.
Initial Setup Language The language function is described on page 15 as the interactive plug-in menu. If you need to choose the language again, follow the steps below. Press the MENU button π† √® To LANGUAGE To choose a language: ENG. (English), FRAN. (French) or ESP. (Spanish) Press the EXIT button when finished INITIAL SETUP 1/2 PREVIOUS E N G . F R A N . E S P.
Initial Setup Front Panel Lock This allows you to lock the keys on the front of the TV, so that a child may not accidentally change your viewing preferences. Press the MENU button π† √® To FRONT PANEL LOCK To turn ON or OFF Press the EXIT button when finished You can turn off this feature in the following ways: • Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your remote control. • Use the remote control.
Initial Setup Video Input Label This function is used to label video input connections for the onscreen displays. Press the MENU button π† To VIDEO INPUT LABEL √® To operate π† To select the desired video input √® To select the desired preset input label (see chart below) π† To FINISH √® To save settings and exit INITIAL SETUP 1/2 PREVIOUS E N G . F R A N . E S P.
Picture Adjust Picture Settings These settings allow you to change and adjust the way the picture appears on your television. TINT Tint allows you to adjust the levels of red and green in your TV picture. COLOR The color function lets you make all the colors in the TV picture appear either more vivid or subtle. PICTURE Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker or brighter picture overall.
Picture Adjust Color Temperature You can decide how strong or dull the colors appear on the TV screen. Press the MENU button π† √® √® To COLOR TEMPERATURE To enter To set LOW or HIGH Press the EXIT button when finished PICTURE ADJUST 1/2 S TA N D A R D PREVIOUS TINT COLOR PICTURE BRIGHT D E TA I L LOW C O L O R T E M P E R AT U R E N E X T PA G E RESET BY 0 BY SELECT O P E R AT E B Y E X I T B Y EXIT Note: If you press the 0 button, you can reset the setting to the factory default setting.
Sound Adjust Sound Settings These settings allow you to change and adjust the sound on your television. BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with the bass adjustment. TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio. BALANCE – Adjust the level of sound between the TV’s left and right speakers with the balance setting.
Clock/Timers Set Clock The set clock function is described on page 16 as the interactive plug-in menu. You can choose to set the clock automatically, or manually. If you need to set the clock again, follow the steps below. Press the MENU button π† To SET CLOCK √® To operate When you set the clock automatically, choose AUTO by pressing the π† To TIME ZONE √® To select your time zone π† To D.S.T. (daylight savings time) √® To turn D.S.T. ON or OFF † To FINISH √® To save settings √ or ® arrows.
Clock/Timers On/Off Timer The on/off timer lets you program your television to turn itself on or off. You can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home.
Clock/Timers World Clock The world clock feature provides time differences for some of the major cities around the world in real time. Press the MENU button π† To WORLD CLOCK √® √® To operate CLOCK/ TIMERS PREVIOUS SET CLOCK ON/OFF TIMER WORLD CLOCK To next page Press the EXIT button when finished Note: • For the proper performace of the function, the XDS information must be provided by the broadcaster. • D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.
Button Functions Power Turns the TV on or off. Press the POWER button Number Buttons - 10Key Pad Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 7: 0 (Zero) 7 (Seven) 100+ Button Use the 100+ button to directly access channels above channel 99. For example, to move to channel 124, press 100+, 2 (Two), 4 (Four). Channel +/– Use these buttons to move up or down all the available channels your TV is able to recieve.
Button Functions Return + The RETURN+ button has two functions: Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons. RETURN+ and hold for three seconds RETURN CHANNEL PROGRAMMED! The channel currently active has been programmed as your return+ channel. Now scan through the channels using the CHANNEL+/– buttons.
Button Functions Display The display screen shows the current status of timers, inputs, and XDS ID.
Button Functions Sound The SOUND button give you a choice of two sound effects. Hyper Surround - Creates a deep, three-dimensional sound effect by channeling the audio through the TV’s front-firing speakers. (AV-32F476, AV-27F476 ONLY) BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility and musical realism.
Button Functions Video Status The VIDEO STATUS button gives you a choice of four TV picture display settings, including a display of your own preferences. STANDARD - Resets the picture display to the factory settings. DYNAMIC - Heightens contrast. THEATER - Gives a rich, film-like look to video when viewing in a dimly lit room. GAME - Used for when you are playing video games connected to your TV. Press the VIDEO STATUS button By every press of the video status button, you change the mode.
Button Functions TV/CATV Slide Switch Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate the television’s built-in tuner. Move the switch to CATV to operate a cable box. Note: • See page 18 for information on programming your remote for cable box operation. VCR/DVD Slide Switch You can control a VCR or DVD player with the buttons on the lower part of the remote control. Move the slide switch to VCR or DVD to operate.
Troubleshooting PROBLEMS CHECK There is no power • See if the power cord became unplugged. • Check for a blown fuse or circuit breaker or a power outage. There is no picture or sound • The antenna could be disconnected. • The input mode could be set improperly. See page 42. • The tuner (Auto Tuner Setup) could be set improperly. See page 24. • The TV station may be having difficulties. Check to see if other stations are working.
Specifications MODEL AV-32F476 AV-27F476 Reception Format NTSC, BTSC System (Multi-Channel Sound) Reception Range VHF 2 to 13, UHF 14 to 69 Sub Mid, Mid, Super, Hyper and Ultra bands (181 channel frequency synthesizer system) AC 120V, 60Hz Power Source Power Consumption Screen Size 160W 140W 32 inch / 80 cm measured diagonally full square 27 inch / 68 cm measured diagonally full square Audio Output 9W + 9W Speakers 2 1/2 x 5 inch / 6.
Specifications MODEL AV-20F476 Reception Format NTSC, BTSC System (Multi-Channel Sound) Reception Range VHF 2 to 13, UHF 14 to 69 Sub Mid, Mid, Super, Hyper and Ultra bands (181 channel frequency synthesizer system) Power Source AC 120V, 60Hz Power Consumption 85W Screen Size 20 inch / 51 cm measured diagonally full square Audio Output 3W + 3W Speakers 2 1/2 x 5 inch / 6.
LCT1785-001A-A ENG 50 12/16/04, 2:38:50 PM
LCT1785-001A-A ENG 51 12/16/04, 2:38:51 PM
JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 LCT1785-001A-A ENG 52 JVC CANADA, INC.
Manuel d’instructions pour téléviseur en couleurs Pour Les Modèles: AV-20F476 AV-27F476 AV-32F476 Illustration du modèle AV-32F476 et RM-C1258G Information importante pour l’utilisateur : Veillez inscrire dans l’espace ci-dessous le numéro de série de votre téléviseur (situé à l’arrière du téléviseur). Agrafez votre reçu ou votre facture à la couverture, à l’intérieur de ce guide. Rangez ce manuel dans un lieu où vous pourrez le retrouver rapidement pour vous y référer.
IMPORTANTES PRECAUTIONS DE SECURITE ATTENTION RISQUE D’ÉLECTROCUTION NE PAS OUVRIR ATTENTION : Pour diminuer les risques d’électrocution Ne pas retirer le capot (ou le panneau arrière). Aucune pièce à l’intérieur n’est réparable par l’utilisateur. Adressez-vous à un réparateur qualifié pour la maintenance.
• Comme société « ENERGY STAR® » , JVC a déterminé que ce produit ou modèle de produit est conforme aux directives « ENERGY STAR® » pour le rendement énergétique. Importantes regles de securite ATTENTION : Veuillez lire et retenir ce qui suit pour votre sécurité. L’énergie électrique autorise de nombreuses applications utiles. Ce téléviseur a été conçu et fabriqué pour assurer la sécurité de l’utilisateur. Mais une utilisation incorrecte peut entraîner une electrocution ou un incendie.
CÂBLE DE DESCENTE 7 L’antenne extérieure ne doit pas se trouver à proximité d’une ligne électrique, de poteaux d’éclairage public ou autres circuits électriques ou encore à un endroit où elle peut tomber sur de telles lignes ou de tels circuits. Au cours de l’installation d’une antenne extérieure, faites particulièrement attention à ne pas toucher ces lignes car un tel contact est mortel. BORNES DE MISE À LA TERRE DISPOSITIF DE DÉCHARGE.
AVERTISSEMENT SUR LES CHARIOTS PORTABLES (Symbole fourni par RETAC) 13 Pour encore mieux protéger votre téléviseur pendant un orage ou si vous ne l’utilisez pas pendant une longue période de temps, débranchez la prise secteur et déconnectez l’antenne. Vous évitez ainsi d’endommager le téléviseur en cas de foudre ou de surtension. 14 Un téléviseur sur table roulante doit être déplacé avec précaution.
Tables des matières Configuration rapide . . . . . 7 Horloge/minuteries . . . . . . 38 Déballage de votre téléviseur . . . . . . 7 Modèles de téléviseur . . . . . . . . . . 8 Télécommandes de téléviseur . . . . . . 9 Pour débuter . . . . . . . . . . . . . . . 10 La télécommande . . . . . . . . . . 10 Raccordement de vos appareils . . . . . 11 Plug-in menu interactif . . . . . . . . . 15 Réglage de l’horloge . . . . . . . . . . 38 Minuterie on/off . . . . . . . . . . . . . 39 Horloge internationale . . .
Configuration rapide Déballage de votre téléviseur Merci d’avoir acheté un téléviseur couleurs JVC. Avant de commencer l’installation de votre nouveau téléviseur, assurez-vous d’avoir toutes les pièces suivantes. Outre ce guide, le carton de votre téléviseur doit comprendre : 1 Téléviseur 1 Télécommande AA Alkaline POWER AA Alkaline TV CATV VCR DVD 2 piles AA INPUT DISPLAY 1 2 4 5 7 8 100+ 0 SLEEP TIMER SOUND VIDEO STATUS 3 6 9 RETURN+ THEATER PRO ASPECT MUTING C.C.
Configuration rapide Modèles de téléviseur REMARQUE : Avant de raccorder votre téléviseur à un autre appareil, veuillez vous reporter aux schémas appropriés pour votre téléviseur et votre télécommande précis. Ceci vous aidera à comprendre la manière de raccorder votre téléviseur à un autre appareil, ainsi qu’à utiliser la télécommande pour configurer votre téléviseur.
Configuration rapide Télécommande de téléviseur TV CATV VCR DVD POWER INPUT DISPLAY 1 2 3 4 5 6 7 8 100+ 0 SLEEP TIMER SOUND VIDEO STATUS 9 RETURN+ THEATER PRO ASPECT MUTING C.C. CH + VOL + VOL – CH – EXIT MENU VCR CHANNEL PREV NEXT VCR/DVD POWER TV/VCR REW PLAY FF REC STOP PAUSE OPEN/CLOSE STILL/PAUSE RM-C1258G TV RM-C1258G MODÈLES : AV-20F476 AV-27F476 AV-32F476 • Reportez-vous aux pages 41 à 46 pour avoir des renseignements sur les boutons de la télécommande.
Configuration rapide Pour débuter Pour débuter Ces pages de configuration rapide vous donneront, en trois étapes faciles, les informations de base dont vous avez besoin pour commencer à utiliser immédiatement votre nouveau téléviseur. Si vous avez des questions, ou pour obtenir des informations plus détaillées sur l’une quelconque de ces étapes, veuillez consulter d’autres sections de ce guide.
Configuration rapide Connexions Deuxième étape - Raccordement de vos appareils Veuillez vous reporter au schéma ci-après pour déterminer la connexion qui vous convient. Reportez-vous ensuite aux schémas appropriés pour raccorder votre téléviseur aux autres appareils que vous puissiez avoir. Après avoir fini de raccorder vos appareils, branchez le cordon dans la prise de courant la plus proche et mettez le téléviseur en marche. Un magnétoscope n’est pas nécessaire au fonctionnement du téléviseur.
Configuration rapide Connexions Schéma no. 1 Illustration de AV-32F476 Panneau arriére du téléviseur AUDIO VIDEO S VIDEO R L MONO OVER Câble ou sortie antenne INPUT 1 INPUT 2 Câble coaxiaux COMPONENT VIDEO 75Ω (VHF / UHF) Video/Y L R OU PB AUDIO OUT PR OUT IN Boîte de câble Remarque : • Si vous n’avez pas de boîte de câble, raccordez le fil de câble provenant de la prise murale à l’arrière du téléviseur. Schéma no.
Configuration rapide Connexions Remarques : • Le vert, le bleu et le rouge sont les couleurs les plus répandues des câbles de DVD. Les couleurs peuvent varier sur certains modèles. Pour de plus amples renseignements, prière de consulter le manuel de l’utilisateur de votre lecteur de DVD. • Veillez à ne pas confondre le câble de DVD rouge avec le câble audio rouge.
Configuration rapide Connexions Connexion à un caméscope Vous pouvez raccorder un caméscope, une console de jeu ou autre matériel à votre téléviseur en utilisant les jacks d’entrée avant (entrée 3) situés sous la porte du panneau avant. Pour y avoir accès, tirez sur la porte pour l’ouvrir. Vous pouvez également les raccorder en utilisant les jacks d’entrée arrière du téléviseur, en vous reportant aux mêmes instructions.
Configuration rapide Plug-in menu Troisième étape - Le plug-in menu interactif Le plug-in menu interactif apparaît lorsque vous mettez votre téléviseur en marche pour la première fois. Ce menu vous aide à configurer votre téléviseur pour usage en vous permettant de définir vos préférences concernant : • La langue dans laquelle vous voulez que les menus à l’écran apparaissent. • Le réglage de l’horloge du téléviseur à la bonne heure afin que vos fonctions de minuterie fonctionnent adéquatement.
Configuration rapide Plug-in menu Réglage horloge automatique Avant d’utiliser l’une quelconque des fonctions de minuterie de votre téléviseur, vous devez d’abord régler l’horloge. Vous pouvez régler votre horloge avec précision en utilisant le signal horaire XDS transmis par la plupart des postes de public broadcasting. S’il n’y a pas de poste PBS dans votre région, vous devrez régler l’horloge manuellement. Reportez-vous à la section réglage manuel de l’horloge ci-après.
Configuration rapide Plug-in menu Régler auto tuner En mode auto tuner setup, le téléviseur balaye automatiquement tous les canaux disponibles, mettant en mémoire les canaux actifs et sautant les canaux vides ou les canaux dont le signal est faible. Ceci signifie que, durant le balayage (à l’aide des boutons CHANNEL +/–), vous ne recevrez que les canaux clairs et actifs. √® PLUG IN MENU INTERACTIF> RÉGLER AUTO TUNER MODE TUNER CÂBLE † Pour choisir CÂBLE ou ANT.
Programmation de la télécommande Réglage des codes CATV, magnétoscope et lecteur de DVD Vous pouvez programmer votre télécommande de manière à actionner votre boîte de câble, récepteur satellite, magnétoscope ou lecteur de DVD en vous reportant aux instructions et aux codes répertoriés ci-dessous. Si l’appareil ne répond à aucun des codes répertoriés ci-après ou à la fonction de recherche de codes, utilisez la télécommande fournie par le fabricant.
Programmation de la télécommande Codes du magnétoscope La télécommande est programmée avec les codes de magnétoscope pour la mise sous et hors tension, la lecture, l’arrêt, l’avance rapide, le rembobinage, la pause, l’enregistrement et le balayage de canaux vers le haut et vers le bas. 1) Repérez la marque du magnétoscope dans la liste de codes indiqués ci-dessous.
Programmation de la télécommande Codes DVD La télécommande est programmée avec les codes DVD pour la mise sous et hors tension, la lecture, l’arrêt, l’avance rapide, le rembobinage, chapitre précédent, chapitre suivant, l’ouverture et la fermeture du plateau, l’image fixe et la pause. 1) Repérez la marque du lecteur de DVD dans la liste de codes indiqués ci-dessous.
Programmation de la télécommande Codes de recherche Fonction de codes de recherche pour boîte de câble ou antenne parabolique 1) Faites glisser le premier interrupteur sélecteur à deux voies sur la position CATV. 2) Enfoncez et tenez le bouton POWER, puis appuyez sur le bouton RETURN+ pendant plus de trois secondes. 3) Relâchez le bouton RETURN+, puis relâchez le bouton POWER. 4) Appuyez sur le bouton POWER de la télécommande et vérifiez que la boîte de câble ou de l’antenne parabolique répond.
Menus à l’écran Utilisation du guide Certains symboles sont utilisés tout au long de ce guide pour vous aider à apprendre les fonctions de votre nouveau téléviseur. Ceux que vous verrez le plus souvent sont les suivants : π† Les flèches montante et descendante signifient appuyer sur les boutons CH+ ou CH–.
Menus à l’écran Système de menus à l’écran Votre téléviseur est équipé d’un système de menus à l’écran JVC. Ces menus vous permettent de régler facilement et rapidement votre téléviseur. Des exemples de menus à l’écran sont donnés ci-après. Des explications détaillées portant sur l’utilisation de chaque menu sont données par la suite dans ce guide. Reportez-vous aux pages 15 à 17 pour obtenir des informations sur le Plug In Menu interactif. Appuyez sur le bouton MENU CONFIG.
Configuration initiale Réglage de l’auto tuner La fonction de réglage de l’auto tuner est décrite à la page 17 en tant que plug-in menu interactif. Si vous voulez accéder à nouveau à cette fonction, suivez les étapes ci-après. Appuyez sur le bouton MENU Vers RÉGLER AUTO TUNER √® Pour activer √® Pour choisir CÂBLE ou ANT. (Antenne) † Pour passer à COMMENCER √® Pour commencer le réglage de l’auto tuner La programmation prendra environ une à deux minutes.
Configuration initiale Message d’un canal réservé Quand un spectateur essaie de regarder un canal réservé, ce message apparaît : Pour regarder un canal que vous avez verrouillé, entrez le code de verrouillage en utilisant le pavé numérique à 10 touches. Si le mauvais code est entré, le message « CODE D’ACCÈS INVALIDE » clignote à l’écran. Le canal est inaccessible jusqu’à ce que le code correct soit introduit.
Configuration initiale Programmes non cotés La programmation non cotée désigne tout programme qui ne contient pas de signal de cote. Les programmes des postes de télévision qui ne transmettent pas les signaux de cote seront dans la catégorie « programmation non cotée ».
Configuration initiale Cotes américaines de Puce V SYSTÈMES AMÉRICAINS DE COTES PARENTALES Les programmes possédant les cotes suivantes sont appropriés pour les enfants. ❒ TV Y est approprié pour tous les enfants Ces programmes sont réalisés pour de très jeunes spectateurs, et ils devraient convenir à tous les âges, y compris les enfants âgés de 2 à 6 ans. ❒ TV Y7 est destiné aux enfants plus âgés La plupart des parents devraient trouver ces programmes convenables pour les enfants âgés de 7 ans et plus.
Configuration initiale Configuration des cotes américaines de Puce V Appuyez sur le bouton MENU π† √® Vers V-CHIP Pour exécuter (l’icône de verrouillage apparaît) Appuyez sur ZÉRO pour accéder au menu puce V √® π† √® Pour ON (activer) ou OFF (inactiver) la puce V Pour passer à FIXER COTES TÉLÉVISEUR Pour exécuter CONFIG.
Configuration Initiale Cotes de films ❒ NR - Non coté. Il s’agit d’un film non coté. Ces films sont souvent importés de pays qui n’utilisent pas le système de cotes MPAA. D’autres films non cotés peuvent être l’oeuvre de réalisateurs amateurs qui n’avaient pas l’intention de diffuser leur film dans le grand public. La programmation NR (non coté) peut contenir tous les types de programmation, y compris des programmes pour enfants, des programmes étrangers ou du matériel adulte. ❒ G – Audience Générale.
Configuration Initiale Cotes canadiennes de Puce V ❒ E - Exemptées. Les programmes exempts comprennent : les informations, les émissions sportives, les documentaires et autres programmes d’information, les débats, les vidéos de musique, et les programmes de variétes. ❒ G – Général. Directives de violence : il n’y aura aucune scène réaliste de violence. Les descriptions de comportements agressifs seront rares et limitées à des représentations de nature clairement fictive, comique ou irréaliste.
Configuration initiale Réglage du code de verrouillage Les réglages de canal réservé et de Puce V sont protégés par un code de verrouillage à quatre chiffres. Votre téléviseur est livré préréglé avec un code de verrouillage de 0000. Vous pouvez changer le code de verrouillage par n’importe quel nombre de quatre chiffres.
Configuration initiale Langue La fonction Langue est décrite à la page 15 du plug-in menu interactif. Si vous devez choisir à nouveau la langue, suivez les étapes ci-après. Appuyez sur le bouton MENU π† √® Vers LANGUE Pour choisir une langue : ENG. (anglais), FRAN. (français) ou ESP. (espagnol). Appuyez sur le bouton EXIT lorsque vous avez terminé CONFIG INITIALE 1/2 PRÉCÉDENTE E N G . F R A N . E S P.
Configuration initiale Blocage du panneau avant Ceci vous permet de verrouiller les touches sur le panneau avant du téléviseur de manière à empêcher un enfant de modifier accidentellement vos réglages. Appuyez sur le bouton MENU π† √® Vers BLOCAGE PANNEAU AV Pour ON (activer) ou OFF (inactiver) Appuyez sur le bouton EXIT lorsque vous avez terminé Vous pouvez inactiver cette fonction de l’une des façons suivantes : • Débranchez le cordon et rebranchez-le.
Configuration initiale Label entrée video Cette fonction sert à nommer des connexions entrée vidéo pour l’affichage OSD. Appuyez sur le bouton MENU π† Vers LABEL ENTRÉE VIDEO √® Pour régler π† Pour sélectionner l’entrée vidéo désirée √® Pour sélectionner l’étiquette d’entrée préréglée désirée (cf. tableau ci-dessous) π† √® CONFIG INITIALE 1/2 PRÉCÉDENTE E N G . F R A N . E S P.
Réglage de l’image Réglages de l’image Ces réglages vous permettent de modifier et d’ajuster la façon dont l’image apparaît sur votre téléviseur. TEINTE Ceci vous permet d’ajuster les niveaux de rouge et de vert dans l’image de votre téléviseur. COULEUR La fonction de couleur vous permet de rendre toutes les couleurs de l’image plus vives ou plus subtiles.
Réglage de l’image Température couleur Grace à température des couleurs, vous pouvez décider l’intensité (élevée ou faible) des couleurs apparaissant sur l’écran de télévision. Appuyez sur le bouton MENU π† √® √® Vers TEMP. COULEUR Pour exécuter Pour avoir une intensité BASSE ou HAUTE Appuyez sur le bouton EXIT lorsque vous avez terminé Remarque : AJUSTER IMAGEN 1/2 PRÉCÉDENTE TEINTE COULEUR IMAGE CLARTÉ D É TA I L T E M P.
Réglages du son Réglages du son Ces réglages vous permettent de modifier et d’ajuster le son de votre téléviseur BASSE – La fonction de réglage du niveau de basse vous permet d’augmenter ou de diminuer le niveau des sons à basse fréquence dans l’audio de votre téléviseur. AIGU – La fonction de réglage du niveau d’aigu vous permet d’augmenter ou de diminuer le niveau des sons à haute fréquence dans l’audio de votre téléviseur.
Horloge/minuteries Réglage de l’horloge La fonction de réglage de l’horloge est décrite à la page 16 en tant que plug-in menu interactif. Vous pouvez choisir de régler l’horloge automatiquement ou manuellement. Si vous avez besoin de régler l’horloge à nouveau, suivez les étapes ci-après. Appuyez sur le bouton MENU π† Vers RÉGLER HORLOGE √® Pour exécuter Lorsque vous réglez l’horloge automatiquement, choisissez AUTO. en appuyant sur les touches √ ou ®.
Minuterie/horloges Minuterie on/off La fonction minuterie on/off vous permet de programmer votre téléviseur pour qu’il s’allume ou s’éteigne de lui-même. Vous pouvez utiliser cette fonction comme alarme pour vous réveiller le matin, pour vous rappeler l’heure d’un programme important ou comme dispositif de sécurité pour donner l’impression qu’il y a quelqu’un chez vous quand vous êtes absent.
Horloge/minuteries Horloge internationale La fonction horloge internationale indique les différentes heures de quelques-unes des métropoles en temps réel. Appuyez sur le bouton MENU π† Vers HORLOGE INTERNATIONALE √® √® Pour régler Vers la page suivante Appuyez sur le bouton EXIT lorsque vous avez terminé Remarque : • Pour un fonctionnement correct, l’information XDS doit être fournie par l’émetteur. • La fonction D.S.T.
Fonctions des boutons Power Allume ou éteint le téléviseur. Appuyez sur le bouton POWER Boutons de numéro – Clavier numérique à 10 touches Utilisez les touches numériques de la télécommande pour passer directement à un canal précis. Par exemple, pour passer au canal 7 : 0 (Zéro) 7 (Sept) Bouton 100+ Appuyez sur le bouton 100+ pour accéder directement aux canaux au-dessus de 99. Par exemple, pour passer au canal 124, appuyez sur 100+, 2 (deux), 4 (quatre).
Fonctions des boutons Return + Le bouton return+ a deux fonctions : Return - Retour au canal regardé immédiatement avant le canal maintenant à l’écran. Return+ - Vous permet de programmer un canal précis auquel revenir après le balayage à travers les canaux à l’aide des boutons CH+ et CH–. RETURN+ et tenez pendant trois secondes. RETOUR Â CANAL PROGRAMMÉ Le canal actuellement actif a été programmé comme votre canal return+. Balayez maintenant à travers les canaux à l’aide des boutons CHANNEL+/–.
Fonctions des boutons Display L’écran affichage indique l’état courant des minuteries, des entrées et de XDS ID.
Fonctions des boutons Sound Le bouton de son vous offre un choix de deux effets sonores. Hyper Quadrosound - Crée un effet sonore tridimensionnel profond en utilisant uniquement les haut-parleurs du téléviseur dirigés vers l’avant. (AV-32F476, AV-27F476 SEULEMENT) BBE - Le son BBE haute définition redonne clarté et présence pour faciliter la compréhension de la voix et conférer un réalisme musical.
Fonctions des boutons Statut vidéo Le bouton video status vous offre un choix de quatre réglages d’affichage d’image, y compris un affichage de vos propres préférences. STANDARD - Rétablit l’affichage de l’image aux réglages d’usine. DYNAMIQUE - Augmente le contraste. CINÉMA - Donne à la vidéo un aspect riche, similaire au film, lorsque vous la regardez dans une pièce faiblement éclairée. JEU - S’emploie lorsque vous faites passer des jeux vidéo raccordés à votre téléviseur.
Fonctions des boutons Interrupteur à glissière TV/CATV Utilisez le syntonisateur du téléviseur ou une boîte de câble pour sélectionner les canaux. Mettez cet interrupteur à la position TV pour utiliser le syntonisateur incorporé dans le téléviseur. Mettez cet interrupteur à la position CATV pour utiliser une boîte de câble. Remarque : • Reportez-vouz à la page 18 pour informations sur la programmation de votre télécommande pour l’utilisation de la boîte de câbles.
Guide de dépannage PROBLÈMES VÉRIFICATION Pas d'alimentation • Voir si le cordon secteur est débranché. • Disjoncteur ou fusibles sautés ou panne de courant. Pas d'image, pas de son • L'antenne est déconnectée. • Le mode d'entrée n'est pas sélectionné correctement. Voir page 42. • Le mode sélecteur (configuration automatique du sélecteur) est mal réglé. Voir page 24. • La station est en panne, vérifiez le bon fonctionnement des autres canaux.
Spécifications MODÈLE AV-32F476 AV-27F476 Système de Réception NTSC, BTSC System (Son multicanaux) Canaux reçus VHF 2 à 13, UHF 14 à 69 Bandes Sub Mid, Mid, Super, Hyper et Ultra (Système de synthétiseur à 181 canaux) Alimentation AC 120V, 60Hz Consommation 160W 140W Taille écran 80 cm en diagonale coins carres 68 cm en diagonale coins carres Puissance audio 9W + 9W Haut-parleurs 6.
Spécifications MODÈLE AV-20F476 Système de Réception NTSC, BTSC System (Son multicanaux) Canaux reçus VHF 2 à 13, UHF 14 à 69 Bandes Sub Mid, Mid, Super, Hyper et Ultra (Système de synthétiseur à 181 canaux) Alimentation AC 120V, 60Hz Consommation 85W Taille écran 51 cm en diagonale coins carres Puissance audio 3W + 3W Haut-parleurs 6.
Remarques 50 LCT1785-001A-A FRE 50 12/16/04, 2:38:06 PM
Remarques 51 LCT1785-001A-A FRE 51 12/16/04, 2:38:07 PM
JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 LCT1785-001A-A FRE 52 JVC CANADA, INC.