HV-32/28P40BJ / LCT1687-001A-U / All Cover HV-32&28P40BJ_Eng.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 2 Thursday, July 29, 2004 9:25 AM Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 1 Thursday, July 29, 2004 9:25 AM How to move the TV When moving the TV, make sure that it is held by two people as shown in the illustration. Be careful not to trap your hands when putting the TV down.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 2 Thursday, July 29, 2004 9:25 AM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. • Avoid damaging the AC plug and power cord.
HV-32/28P40BJ / LCT1687-001A-U / English Safety_Eng.fm Page 3 Thursday, July 29, 2004 5:31 PM To enjoy even better picture quality The picture quality of this TV is controlled by a combination of three functions (PICTURE MODE, DIGITAL VNR, and Super DigiPure). By adjusting these three functions, you can change the picture quality to suit your preferences. The initial settings of the three functions are as follows.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 4 Thursday, July 29, 2004 9:25 AM CONTENTS Setting up your TV ...................................5 PICTURE menu ...................................... 25 Connecting the aerial and video cassette recorder (VCR) ....................................... 5 Connecting the power cord to the AC outlet....................................................... 6 Putting the batteries into the remote control...........................................
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 5 Thursday, July 29, 2004 9:25 AM Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and video cassette recorder (VCR) • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If you are connecting a VCR, follow A → B → C in the diagram opposite.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 6 Thursday, July 29, 2004 9:25 AM Setting up your TV Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. • Failure to use the supplied power cord or to insert it into a correctly earthed outlet may result in electric shocks. Initial settings When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 7 Thursday, July 29, 2004 9:25 AM Setting up your TV 2 Press the a button The LANGUAGE menu appears. > LANGUAGE 5 Press the blue button to start the AUTO PROGRAM function The AUTO PROGRAM menu appears and received TV channels are automatically stored in the programme numbers (PR). >> AUTO PROGRAM CH 28 14% OK D0002(E)-EN 3 Press the 6 buttons to choose ENGLISH. Then press the a button The on-screen display will then be in English.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 8 Thursday, July 29, 2004 9:25 AM Setting up your TV 6 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV RECORDING DEVICE OK EXIT D0005-EN If you do not have a T-V LINK compatible VCR connected: Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 9 Thursday, July 29, 2004 9:25 AM Setting up your TV • If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station. • If you do not want to use the ACI function, press the 6 buttons to choose ACI SKIP and then press a. • When the cable TV broadcast reception is poor, the ACI function will not work properly.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 10 Thursday, July 29, 2004 9:25 AM Setting up your TV T-V LINK functions When you have a T-V LINK compatible VCR connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features: To use T-V LINK functions: A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 11 Thursday, July 29, 2004 9:25 AM TV buttons and functions Turn the main power on Press the A button on the TV. The power lamp lights red and your TV is in standby mode. • If the power lamp lights green, the TV is already on. To turn the main power off: Press the A button again. The power lamp goes off. Caution • The A button on the TV does not fully isolate the TV from the AC supply.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 13 Thursday, July 29, 2004 9:25 AM Remote control buttons and functions Choose a TV channel and watch images from external devices Use the number buttons: Enter the programme number (PR) of the channel using the number buttons. Example: • PR 6 → press 6 • PR 12 → press 1 and 2 Use the p p buttons: Press the p p buttons to choose the programme number (PR) you want or an EXT terminal.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 14 Thursday, July 29, 2004 9:25 AM Remote control buttons and functions • The VCR sends its playback image along the aerial cable as an RF (radio frequency) signal. • Also see your VCR instruction manual. Adjust the volume Press the r q buttons to adjust the volume. The volume level indicator appears and the volume changes as you press the r q buttons. Muting the sound Press the l (muting) button to turn off the sound.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 15 Thursday, July 29, 2004 9:25 AM Remote control buttons and functions ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 16 Thursday, July 29, 2004 9:25 AM Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears. 2 Press the a button to display the ZOOM mode indicator The indicator appears.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 17 Thursday, July 29, 2004 9:25 AM Remote control buttons and functions Using the “Multi-picture” function 1 Press the X button The “Multi-picture” menu appears. 1 2 12 D0101-EN 2 Press the 5 buttons to choose the number of screens and then press the a button 1 • When set to 2-pictures multi, the mainpicture can be changed by pressing the p p buttons. The sub-picture screen can be changed by pressing the p buttons.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 18 Thursday, July 29, 2004 9:25 AM Remote control buttons and functions • When set to 2-pictures multi and the headphones are connected, the sound for the main-picture is output from the TV speakers and the sound from the sub-picture is output from the headphones. - Adjust the volume of the sub-picture sound from the headphones with “HEADPHONE VOLUME” in the “SOUND” menu (see page 29).
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 19 Thursday, July 29, 2004 9:25 AM Remote control buttons and functions Favourite channel function You can register your favourite TV channels (PR 1 – PR 99) in the number buttons 1 to 4. After registering, the channel can be called by pressing the d (favourite) button and a number button 1 to 4.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 20 Thursday, July 29, 2004 9:25 AM Remote control buttons and functions Operating a JVC brand VCR or DVD player These buttons will operate a JVC brand VCR or DVD player. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control. 1 Set the VCR/TV/DVD Switch to the VCR or DVD position VCR: When you are operating the VCR, set the switch to the VCR position.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 22 Thursday, July 29, 2004 9:25 AM Teletext function 2 Press a colour button to choose a position. Then press the number buttons to enter the page number Sub-page Some teletext pages include sub-pages that are automatically displayed. 1 Choose a teletext page that includes sub-pages Sub-page numbers that can be viewed are automatically displayed at the top of the screen.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 23 Thursday, July 29, 2004 9:25 AM Teletext function Index You can return to the index page instantly. Press the G (Index) button Returns to page 100 or a previously specified page. Cancel You can search for a teletext page while watching TV. 1 Press the number button to enter a page number, or press a colour button The TV searches for a teletext page. 2 Press H (Cancel) button The TV programme appears.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 24 Thursday, July 29, 2004 9:25 AM Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully. Types of menu PICTURE menu Choose to set the screen settings. D0106 Buttons used to operate the menus SOUND menu Choose to set the sound settings.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 25 Thursday, July 29, 2004 9:25 AM PICTURE menu CONTRAST PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP. FEATURES STANDARD COOL RESET OK D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 26 Thursday, July 29, 2004 9:25 AM PICTURE menu WARM: A reddish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films. FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 27 Thursday, July 29, 2004 9:25 AM PICTURE menu MIN: The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN. • The MIN setting is not suitable for highquality pictures which contain very little noise. MAX: The level of DigiPure effect is set to the maximum.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 28 Thursday, July 29, 2004 9:25 AM PICTURE menu 3 Press the 6 buttons to choose the appropriate colour system. Then press the a button PAL: PAL system NTSC 3.58: NTSC 3.58 MHz system NTSC 4.43: NTSC 4.43 MHz system AUTO: This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or an EXT terminal.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 29 Thursday, July 29, 2004 9:25 AM SOUND menu SOUND STEREO/ BASS TREBLE BALANCE HEADPHONE VOLUME 3D CINEMA SOUND OK BALANCE You can adjust the volume balance between the left and right speaker. 2 : turn the left speaker’s volume level up. 3 : turn the right speaker’s volume level up. HEADPHONE VOLUME D0019-EN • Functions in the “SOUND” menu other than “HEADPHONE VOLUME” work for the TV speakers.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 30 Thursday, July 29, 2004 9:25 AM FEATURES menu FEATURES SLEEP TIMER ON TIMER CHILD LOCK APPEARANCE BLUE BACK FAVOURITE SETTING TYPE A ON ON TIMER You can set the TV to automatically turn on to the TV channel you want after a set period of time. OK D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 31 Thursday, July 29, 2004 9:25 AM FEATURES menu CHILD LOCK When there is a TV channel you do not want your children to watch, you can use the CHILD LOCK function to lock out the TV channel. Even when a child chooses a programme number (PR) for a locked TV channel the screen will change to blue and display n (CHILD LOCK) so the TV channel cannot be viewed.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 32 Thursday, July 29, 2004 9:25 AM FEATURES menu If you have forgotten the ID number: Perform step 1 of “To set the CHILD LOCK function”. After confirming the ID number, press the b button to exit the menu. • Even if you reset the lock temporarily, it does not mean that the CHILD LOCK function set for the TV channel is cancelled. The next time anyone tries to view the TV channel, it will be locked again.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 33 Thursday, July 29, 2004 9:25 AM SET UP menu EDIT/MANUAL SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE PICTURE TILT DECODER(EXT-2) COMPONENT AUTO SELECT EXT SETTING ON ON OK D0029-EN AUTO PROGRAM You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings” (page 6). To receive SKY 1 you need a satellite tuner.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 34 Thursday, July 29, 2004 9:25 AM SET UP menu • When a TV channel has already been registered in PR 99, using the INSERT function deletes that TV channel. Basic operation 1 Choose EDIT/MANUAL, then press the a or 3 button The EDIT menu appears.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 37 Thursday, July 29, 2004 9:25 AM SET UP menu LANGUAGE The LANGUAGE setting which was performed in the “Initial settings” (page 6) can be changed. 1 Choose LANGUAGE, then press the a or 3 button A sub-menu of the LANGUAGE function appears.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 38 Thursday, July 29, 2004 9:25 AM SET UP menu 6 Turn on the VCR, and then press the a button to transmit the data to VCR The T-V LINK menu disappears once the data transmission ends.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 39 Thursday, July 29, 2004 9:25 AM SET UP menu 1 Press the 5 or 6 buttons to choose an EXT terminal EXT SETTING 1 Choose EXT SETTING, then press the a or 3 button The EXT SETTING menu appears.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 40 Thursday, July 29, 2004 9:25 AM SET UP menu ID LIST DUBBING You can store a name for each of the devices connected to each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with its name.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 41 Thursday, July 29, 2004 9:25 AM SET UP menu • During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. • When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 42 Thursday, July 29, 2004 9:25 AM Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connecting anything: • Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram. Also, the equipment settings may need to change depending on the connection method.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 43 Thursday, July 29, 2004 9:25 AM Additional preparation Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR Connect the equipment to an EXT terminal. You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)” on page 39.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 44 Thursday, July 29, 2004 9:25 AM CH/CC numbers • When you want to use the INSERT function on page 36, find the CH/CC number corresponding to the channel number of the TV channel from this table. If you want to know a particular TV channel’s channel menu, look in TV listings magazines or contact the broadcaster.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 45 Thursday, July 29, 2004 9:25 AM Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 46 Thursday, July 29, 2004 9:25 AM Troubleshooting • Videotaping teletext is not recommended because it may not record correctly. • When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it is coloured. This is unavoidable due to the nature of the picture tube itself, and not due to a TV failure.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.book Page 47 Thursday, July 29, 2004 9:25 AM Troubleshooting • It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a fault. This is the time needed for the image to stabilize before it can be displayed. • The TV may make a crackling sound due to a sudden change in temperature. The picture or sound may be normal.
HV-32/28P40BJ / LCT1687-001A-U / English HV-32&28P40BJ_Eng.
HV-32/28P40BJ / LCT1687-001A-U / All Cover HV-32&28P40BJ_Eng.