ENGLISH INSTRUCTIONS MANUAL DE INSTRUCCIONES EN SP HARD DISK CAMCORDER VIDEOCÁMARA CON DISCO DURO GZ-MG730 U Dear Customer Thank you for purchasing this hard disk camera. Before use, please read the safety information and precautions contained in pages 4 and 5 to ensure safe use of this product. For Future Reference: Enter the Model No. (located on the bottom of the camera) and Serial No. (located on the battery pack mount of the camera) below. Model No. Serial No.
Easy Start Guide 1 Preparation Q Attach the battery pack R Open the lens cover CAUTION • Charge the battery pack before use. (p. 14) • Be sure to use JVC battery packs. If you use any other battery packs besides JVC battery packs, safety and performance can not be guaranteed. BATT. 2 Video recording CAUTION • Before recording an important scene, Q Select ! (video) mode it is recommended to conduct a trial recording. • Try recording with easy [AUTO] mode first.
CAUTION: Touch the sensors with your finger. The sensors do not function if you touch them with your finger nail or with gloves on. ENGLISH S Open the LCD monitor T When [SET DATE/TIME!] appears, select [YES] within 10 seconds The camera turns on automatically. Set the date and time (p. 14) SET DATE/TIME! YES NO (p. 6) R Select recording (REC) mode S Press the START/STOP button to start recording [5h56m] SELECT PLAY/REC IRECT DIRECT S Select the desired file using the touch sensor.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Only use attachments/accessories specified by the manufacturer. 10.
How to Select an Item Using the Touch Sensor An example screen in English is used for the guidance below. NOTE The cursor moves from 1 to 9 on the index screen when you slide your finger on the touch sensor. L Selecting an item from the menu list (on the menu screen) MENU Q 1 2 3 4 5 6 7 8 9 IMAGE QUALITY IMAGE SIZE GAIN BASIC SETTINGS CAUTION Touch the sensors with your finger. The sensors do not function if you touch them with your finger nail or with gloves on.
JVC will not be responsible for any lost data. It is recommended to copy your important recorded data to a DVD or other recording media for storage. (p. 22) Make a trial recording Before the actual recording of important data, make a trial recording and play back the recorded data to check that the video and sound have been recorded correctly. Reset the camera if it does not operate correctly This camera uses a microcomputer.
Contents GETTING STARTED PC OPERATION Accessories ............................................ 9 File Backup on a Windows® PC ........... 23 How to Use the Everio Dock .......................... 9 System Requirements ................................. 23 Attaching the Core Filter to the USB Cable ... 9 Software Installation .................................... 24 Index ...................................................... 10 Indications on LCD Monitor.................
GETTING STARTED Accessories ENGLISH AC Adapter Battery Pack AP-V18U/14U BN-VF808U Audio/Video Cable USB Cable Shoulder Strap CD-ROM Remote Control Unit Lithium Battery (p. 15) (p. 26) RM-V751U (p. 15) CR2025 Pre-installed in the remote control unit. Everio Dock Core Filter (Large and small) (p. 22, 27 and 29) NOTE CU-VC6U (see below) Make sure to use the provided cables for connections. Do not use any other cables.
Index NOTES • The LCD monitor can rotate 270°. • Power-linked operation You can also turn the camera on/off by opening/closing the LCD monitor during the recording mode. • Be careful not to cover 6, 7, 8 and : during shooting.
! # $ % & ( ) * + , - Touch Sensor (p. 6) OK (DISP) Button [OK/DISP] (p. 15) Menu Button [MENU] Power Button [POWER] (You can turn off the camera by pressing and holding this button.) Speaker Playback/Recording Mode Switching Button [SELECT PLAY/REC] (p. 20) Access Lamp [ACCESS] (Blinks when you access files. Do not turn off the power or remove the battery pack/ AC adapter while accessing files.) Power/Charge Lamp [POWER/CHARGE] (Blinks when you charge the battery.) Direct DVD Button [DIRECT DVD] (p.
Indications on LCD Monitor During both Video and Still Image Recording During Video Recording Only [5h56m] 0:04:01 REC 1/4000 ±0 F5.6 HDD 200X APR. 8. 2008 12:13PM ! Selected Operation Mode Indicator 4 : Auto Mode 3 : Manual Mode # Effect Mode Indicator $ Tele Macro Mode Indicator % F : White Balance Indicator H : Program AE Mode Indicator 4 : Color Mode Indicator & Zoom Indicator ( Digital Image Stabilizer (DIS) Indicator (Appears when [DIS] is set to [OFF].
During Still Image Playback ENGLISH During Video Playback 9:55:01 101-0098 K F HDD HDD X5 5 APR. 8. 2008 12:13PM ! Mode Indicator # Effect Mode Indicator $ Wipe/Fader Effect Indicator % 6 : Playlist Playback Indicator (Appears when playing back a playlist.) ¨ª : Event Search Playback Indicator (Appears when playing back a video file from the event search.) ¨© : Date Search Playback Indicator (Appears when playing back a video file from the date search.
Necessary Settings before Use NOTES Charging the Battery Pack • You can also use the camera with just the AC adapter. 1 2 Close the LCD monitor to turn off the camera. Attach the battery pack. Slide the battery pack down until it locks in place. • Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter. Date/Time Setting 1 Bottom of the Camera 2 Open the LCD monitor to turn on the camera. When [SET DATE/TIME!] appears, select [YES] within 10 seconds.
Other Settings ENGLISH Attaching the Shoulder Strap Buckle Strap Guide Eyelet Checking the Remaining Battery Power Preparation: • Attach the battery pack. • Press the SELECT PLAY/REC button to select recording mode. For ! mode: Press the INFO button twice or the INFO button and then select ;. For # mode: Press the INFO button. DIRECT BACK UP Preparing the Remote Control A battery is included inside the remote control at the time of purchase. Remove the insulation sheet before use.
RECORDING Recording Files Video Recording Preparation: Open the LCD monitor to turn on the camera. Slide the mode switch to select ! (video) mode. Press the SELECT PLAY/REC button to select recording mode. Press the START/STOP button to start recording. [5h56m] REC Approximate remaining time for recording appears. L To stop recording Press the START/STOP button again. L To view the video you just recorded Select A during pause. During the preview, you can delete the video by selecting *.
ENGLISH Still Image Recording Preparation: Open the LCD monitor to turn on the camera. Slide the mode switch to select # (still image) mode. Press the SELECT PLAY/REC button to select recording mode. Press and hold the SNAPSHOT button halfway. 640 FINE [ The ? indicator becomes green when the captured image is focused. L To view the image you just recorded Select A after shooting. During the preview, you can delete the image by selecting *.
Playing Back Files Video/Still Image Playback 3 Select the desired file. VIDEO PLAYBACK 1 Slide the mode switch to select ! (video) or # (still image) mode. L To watch on TV See page 19. 2 Press the SELECT PLAY/REC button to select playback mode. L To check the file information Press the INFO button when playback is paused. L To adjust the sound volume of videos The index screen for videos appears.
Watching Images on TV ENGLISH Preparation: • Set [SWITCH TO ANALOG I/O] to [OUTPUT] from the MENU. (Factory-preset = [OUTPUT]) • Turn off all units. AV Jack DC Jack AV Cable To AC Outlet AV Input Jack AC Adapter NOTES • You can also connect the cables using the Everio dock connectors. The S-Video cable (optional) enables even higher playback quality. (p. 9) When other devices such as a DVD burner are connected to the Everio dock, turn the power of these devices off.
EDITING/COPYING Managing Files CAUTION Do not remove the recording medium or perform any other operation (such as turning off the power) while accessing files. Also, be sure to use the provided AC adapter, as the data on the recording medium may be corrupted if the battery becomes exhausted during operation. If the data on the recording medium becomes corrupted, format the recording medium. Deleting/Protecting the Currently Displayed File After performing steps 1-2 3 Select [CURRENT].
Select [EXECUTE AND QUIT] (when performing [DELETE]) or [YES] (when performing [PROTECT]). ENGLISH 6 DELETE? EXECUTE AND QUIT QUIT RETURN Deleting/Protecting All Files After performing steps 1-2 (p. 20) 3 4 Select [DELETE ALL] or [PROTECT ALL]. When [DELETE ALL?] or [PROTECT ALL?] appears, select [YES]. DELETE ALL? (EXCEPT PROTECTED FILE) YES NO L To quit the screen Select [QUIT]. L To release protection Select the protected file in step 4 (“Deleting/Protecting Files” : p. 20).
Copying Files Types of Copying and Connectable Device The Camera You can copy video/still images from HDD onto microSD card or from microSD card to HDD with this camera alone. Connection with a DVD Burner Preparation: Close the LCD monitor to turn off the camera. DVD Burner USB Jack USB Cable DVD Burner (CU-VD3) You can copy video/still image files recorded on this camera onto DVD discs. (right column) USB Jack To AC Outlet PC You can copy video/still image files on this camera onto your PC. (p.
PC OPERATION File Backup on a Windows® PC System Requirements OS: Either one of the following OS should be pre-installed (32-bit): • Windows®® XP Home Edition (SP2) (SP2) • Windows XP Professional Home Basic • Windows VistaTM • Windows VistaTM Home Premium CPU: • Intel® Pentium® 4, at least 1.6 GHz (at least 2.2 GHz recommended) ® M, at least 1.4 GHz • Intel®® Pentium • Intel CoreTM Duo, at least 1.
File Backup on a Windows® PC (Continued) Software Installation Please read the “JVC SOFTWARE LICENSE AGREEMENT” in the CD-ROM instruction before you install software. The following software is included in the CDROM that came with your camera. • CyberLink DVD Solution Comprehensive application software that consists of the following three kinds of software. PowerCinema NE for Everio The main file managing software. You can perform various operations such as file backup, playback, and DVD authoring.
5 Select the desired language and click [OK]. Connecting the Camera to the PC Preparation: Close the LCD monitor to turn off the camera. ENGLISH 4 USB Jack Click [Yes]. The software installation starts. USB Cable To AC Outlet 6 Click [Finish]. L When installation is completed The installed software is displayed in [All Programs]. The backup destination folder [MyWorks] for files is created on the hard disk drive that has the most free space.
File Backup on a Windows® PC (Continued) L When you have finished operation Always follow the procedures below when disconnecting the camera, or turning off the power of the camera/PC. Failing to do so may cause damage to the camera and PC. 1) Confirm that the access lamp on the camera does not light or blink. (If the access lamp lights or blinks, wait until it is turned off before proceeding.) 2) Double-click the [Safely Remove Hardware] or [Unplug or Eject Hardware] icon in the status bar.
Click [EVERIO_HDD] or [EVERIO_ SD]. When the progress bar disappears, the process is complete. 5 Select the folder you want to back up, and drag & drop it into the folder you created in step 1. • SD_VIDEO: ENGLISH 3 Folder that contains video files. If you want to back up files individually, open this folder, and drag & drop files such as [PRG001] one by one. • DCIM: Folder that contains still image files.
Other Windows® PC Operations Digital Photo Navigator 1.5 Getting More Use of the Software For more information on operations of the software, see the Tutorials for each software program or the User’s Guides. The User’s Guide is included on the CD-ROM in PDF format. 1 PowerCinema NE for Everio 1 2 2 Double-click the PowerCinema NE for Everio icon. Start PowerCinema NE for Everio. 3 Click [Tutorial]. 4 PowerProducer 3 NE Load the provided CD-ROM into the PC.
Folder Structure and Extensions X = number Recording medium Contains the still image folders. [XXXJVCSO] [PIC_XXXX.JPG] [PIC_XXXX.JPG] ENGLISH [DCIM] Still image file [XXXJVCSO] [XXXJVCSO] Contains the video file folders. [SD_VIDEO] [MGR_INFO] [PRGXXX] [PRGXXX.PGI] [MOVXXX.MOD] [MOVXXX.MOI] Management information* for the media as a whole Management information* Video file Management information* for the video files [PRGXXX] [PRGXXX] [EXTMOV] [MOV_XXXX.
File Backup on a Macintosh® You can back up camera files onto your computer. NOTES • Never disconnect the USB cable while the access lamp on the camera lights or blinks. • Do not turn off the camera when the USB System Requirements Hardware: Macintosh must be standard equipped with USB 2.0 port OS: Mac OS X (v10.3.9, v10.4.2 to v10.4.10) Connecting the Camera to the Macintosh Preparation: Close the LCD monitor to turn off the camera.
Preparation: Connect the camera to the computer with the USB cable. (p. 30) 1 2 3 4 5 • DCIM: Folder that contains still image files. If you want to back up files individually, open this folder, and drag & drop files such as [PIC_0001.JPG] one by one. ENGLISH File Backup on the Macintosh On the computer, create a folder to back up files into. Open the LCD monitor to turn on the camera. On the camera, select [PLAYBACK ON PC]. NOTE Double-click [EVERIO_HDD] or [EVERIO_SD] icon.
Customer Support Information Contact us for Information on the Provided Software Use of this software is authorized according to the terms of the software license. JVC When contacting the nearest JVC office or agency in your country (refer to the JVC Worldwide Service Network at http://www.jvc-victor.co.jp/english/worldmap/index-e.html) about this software, please have the following information ready.
FURTHER INFORMATION Troubleshooting The following phenomena are not malfunctions. • The camera heats up when it is used for a long time. • The battery heats up during charging. • When playing back a video file, the image stops momentarily or the sound is interrupted at junctions between scenes. • To solve the problem, first follow the instructions below. • If the problem is not solved, reset the camera. (below) • If the problem persists, please consult your nearest JVC dealer.
Troubleshooting (Continued) Trouble Recording Playback – 34 • Select the recording medium properly. • To watch images on a TV, set the TV’s input mode or – 19 • The temperature of the camera is increasing. If the – • Remove protection from the files and delete them. • There is a large number of still images (approx. 1,000 or 21 The microSD card cannot be removed from the camera. • Push the microSD card in a few more times.
Cleaning L To clean the exterior Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild soap and wring it out well before wiping. Then wipe again with a dry cloth. ENGLISH Before cleaning, turn off the camera and remove the battery pack and AC adapter. L To clean the LCD monitor Wipe gently with a soft cloth. Be careful not to damage the monitor. L To clean the lens Wipe gently with lens cleaning paper.
Warning Indications Meaning/Action • Displays the remaining battery power. – Indication (Battery indicator) SET DATE/TIME! CHECK LENS COVER HDD ERROR! MEMORY CARD ERROR! VIDEO MANAGEMENT FILE IS BROKEN. TO RECORD/PLAYBACK VIDEO, RECOVERY IS REQUIRED. RECOVER? RECORDING FAILURE POWER IS OFF, OR USB DEVICE IS UNSUPPORTED DROP DETECTION WORKED AND THE POWER IS TURNED OFF 36 High Exhausted • As the battery power comes close to nil, the battery indicator blinks.
Specifications L For general Power supply DC 11 V (Using AC adapter) DC 7.2 V (Using battery pack) Power consumption Approx. 3.7 W* * When the monitor backlight is set to [STANDARD] mode. Dimensions (W x H x D) 119 mm x 69 mm x 68 mm (4-11/16" x 2-3/4" x 2-11/16") Weight Approx. 335 g (0.74 lbs) (incl. grip belt) Approx. 380 g (0.84 lbs) (incl.
Specifications (Continued) AC Adapter Power requirement AC 110 V to 240 Vd, 50 Hz/60 Hz Output ,1A DC 11 V § Remote Control Power supply DC 3 V Battery life Approx. 1 year (depending on the frequency of use) Operating distance Within 5 m (16.4 ft) Operating temperature 0°C to 40°C (32°F to 104°F) Dimensions (W x H x D) 42 mm x 14.5 mm x 91 mm (1-11/16" x 5/8" x 3-5/8") Weight Approx. 30 g (0.07 lbs) (incl. battery) Design and specifications subject to change without notice.
Approximate recording time (minutes) (for video) HDD microSD Card 30 GB 4 GB ULTRA FINE 430 57 FINE 640 85 NORMAL 850 113 ECONOMY 2250 298 ENGLISH Recording medium Quality Approximate number of storable images (for still image) Recording medium HDD microSD Card 30 GB 256 MB 512 MB 1 GB 2 GB 4 GB 3072 x 2304 / FINE 9220 75 155 310 625 1235 3072 x 2304 / STANDARD 9999 115 230 465 940 1850 2592 x 1944 / FINE 9999 110 220 445 900 1770 Image size/Quality 4:3 2592
Cautions AC Adapter Recording Medium When using the AC adapter in areas other than the USA The provided AC adapter features automatic voltage selection in the AC range from 110 V to 240 V. USING HOUSEHOLD AC PLUG ADAPTER In case of connecting the unit’s power cord to an AC wall outlet other than American National Standard C73 series type use an AC plug adapter, called a “Siemens Plug”, as shown. For this AC plug adapter, consult your nearest JVC dealer.
• For safety, DO NOT ... open the camera’s chassis. ... disassemble or modify the unit. ... allow inflammables, water or metal objects to enter the unit. ... remove the battery pack or disconnect the power supply while the power is on. ... leave the battery pack attached when the camera is not in use. ... place naked flame sources, such as lighted candles, on the apparatus. ... expose the apparatus to dripping or splashing. ... leave dust or metal objects adhered to the power plug or an AC wall outlet. ...
MEMO 42
Terms A M AC Adapter ...................................................... 14, 40 Macintosh .............................................................. 30 B P Battery Pack .............................................. 14, 15, 40 Power-Linked Operation ........................................ 10 Protecting Files ...................................................... 20 C Clock Adjust ........................................................... 14 Copying (Moving) Still Images ....................
MEMO
Guía de inicio rápido 1 Preparación Q Instale la batería R Abra la cubierta del objetivo PRECAUCIÓN • Cargue la batería antes del uso. (p. 14) • Asegúrese de utilizar baterías JVC. Si utiliza otras baterías aparte de las de JVC, no se puede garantizar la seguridad ni el rendimiento. BATT. 2 Grabación de vídeo PRECAUCIÓN • Antes de grabar una escena importante, Q Seleccione el modo ! (vídeo) se recomienda realizar una grabación de prueba.
PRECAUCIÓN: Toque los sensores con el dedo. Los sensores no funcionan si los toca con la uña o con guantes puestos. S Abra la pantalla LCD T Cuando aparezca [¡AJUSTE FECHA/ HORA!], seleccione [SÍ] antes de 10 segundos La cámara se enciende automáticamente. Ajuste la fecha y la hora (p. 14) ¡AJUSTE FECHA/HORA! SÍ NO (p.
Precauciones de seguridad ADVERTENCIA: PARA EVITAR RIESGO DE INCENDIOS O ELECTROCUCIONES, NO EXPONGA ESTE APARATO A LA LLUVIA O HUMEDAD. NOTAS: • La placa de valores nominales y la precaución • • de seguridad se encuentran en la parte inferior y/o en la parte posterior de la unidad principal. La placa del número de serie se encuentra en el compartimiento de la batería.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 1. 2. 3. 4. 5. 6. 7. Lea estas instrucciones. Conserve estas instrucciones. Preste atención a las advertencias. Siga todas las instrucciones. No utilice este aparato cerca del agua. Limpie sólo con paño seco. No bloquee ninguna abertura de ventilación. Instale de acuerdo con las instrucciones del fabricante. 8. No lo instale cerca de ninguna fuente de calor tales como, radiadores, calefactores, cocinas, u otros aparatos (incluyendo amplificadores) que produzcan calor.
Cómo seleccionar un elemento con el sensor táctil A continuación se presenta una pantalla de ejemplo en inglés como guía. NOTA El cursor se mueve del 1 al 9 en la pantalla de índice al deslizar el dedo por el sensor táctil. L Selección de un elemento de la lista de menús (en la pantalla de menú) 1 2 3 4 5 6 7 8 9 MENU Q IMAGE QUALITY IMAGE SIZE GAIN BASIC SETTINGS PRECAUCIÓN Toque los sensores con el dedo. Los sensores no funcionan si los toca con la uña o con guantes puestos.
Realice una copia de seguridad de los datos importantes que haya grabado JVC no se responsabilizará de ninguna pérdida de datos. Se recomienda que guarde los datos importantes que haya grabado copiándolos en un DVD o cualquier otro soporte de grabación. (p. 22) Realice una grabación de prueba Antes de grabar los datos importantes, realice una grabación de prueba y reproduzca los datos grabados para comprobar si el vídeo y el sonido se han grabado correctamente.
Contenido PREPARATIVOS Accesorios .............................................. 9 Cómo utilizar la base de conexión Everio...... 9 Colocación del filtro de núcleo en el cable USB y en el cable de CC ............................. 9 Índice ..................................................... 10 Indicaciones en la pantalla LCD.......... 12 Ajustes preliminares necesarios ........ 14 Carga de la batería ...................................... 14 Ajuste de la fecha/hora ................................
PREPARATIVOS Accesorios Adaptador de CA Batería AP-V18U/14U BN-VF808U Cable de audio/vídeo Cable USB Correa para hombro CD-ROM Mando a distancia Pila de litio (p. 15) (p. 26) RM-V751U (p. 15) CR2025 Preinstalada en el mando a distancia. (p. 22, 27 y 29) NOTA Base de conexión Everio CU-VC6U (abajo) Filtro de núcleo (Grande y pequeño) (abajo) Asegúrese de utilizar los cables suministrados para las conexiones. No utilice ningún otro cable.
Índice NOTAS • La pantalla LCD puede girar 270°. • Funcionamiento siempre listo para grabar La cámara también se puede encender y apagar abriendo y cerrando la pantalla LCD durante el modo de grabación. • Procure no tapar 6, 7, 8 y : durante la filmación.
Cámara ! Sensor táctil (p. 6) # Botón de aceptar (pantalla) [OK/DISP] (p. 15) $ Botón de menú [MENU] % Botón de alimentación [POWER] (La cámara se puede apagar manteniendo pulsado este botón.) & Altavoz ( Botón de cambio de modo de reproducción/grabación [SELECT PLAY/ REC] (p. 20) ) Lámpara de acceso [ACCESS] (Parpadea al acceder a archivos. No apague la alimentación ni extraiga la batería o el adaptador de CA mientras se está accediendo a los archivos.
Indicaciones en la pantalla LCD Durante la grabación de vídeo e imágenes fijas Sólo durante la grabación de vídeo [5h56m] 0:04:01 REC 1/4000 ±0 F5.6 HDD 200X APR. 8.
Durante la reproducción de vídeo Durante la reproducción de imágenes fijas 9:55:01 X5 K 101-0098 HDD F HDD 5 APR. 8. 2008 12:13PM ! Indicador de modo # Indicador de modo de efectos especiales $ Indicador de efectos de cortinilla/fundido % 6: Indicador de reproducción de lista de reproducción (Aparece al reproducir una lista de reproducción.) (p. 39) ¨ª : Indicador de reproducción de búsqueda de eventos (Aparece cuando se reproduce un archivo de vídeo desde la búsqueda de eventos.
Ajustes preliminares necesarios NOTAS Carga de la batería • La cámara también se puede usar con sólo el adaptador de CA. 1 2 Cierre la pantalla LCD para apagar la cámara. • No estire ni doble el enchufe o el cable del adaptador de CA. Se podría dañar el adaptador de CA. Instale la batería. Inserte la batería en su compartimiento hasta que encaje. Ajuste de la fecha/hora Base de la cámara 1 2 Abra la pantalla LCD para encender la cámara.
Otros ajustes Colocación de la correa para hombro Hebilla Orificio Guía corredera de la correa Comprobación de la carga restante de la batería Preparativos: • Instale la batería. • Pulse el botón SELECT PLAY/REC para seleccionar el modo de grabación. Para el modo !: Pulse el botón INFO dos veces o pulse el botón INFO y luego seleccione ;. Para el modo #: Pulse el botón INFO. DIRECT BACK UP Preparación del mando a distancia El mando a distancia se suministra con una pila instalada.
GRABACIÓN Grabación de archivos Grabación de vídeo Preparativos: Abra la pantalla LCD para encender la cámara. Deslice el interruptor de modo para seleccionar el modo ! (vídeo). Pulse el botón SELECT PLAY/REC para seleccionar el modo de grabación. Pulse el botón START/STOP para empezar la grabación. [5h56m] REC Aparece el tiempo restante aproximado para la grabación. L Para detener la grabación Pulse de nuevo el botón START/STOP. L Para ver el vídeo recién grabado Seleccione A durante la pausa.
Grabación de imágenes fijas Preparativos: Abra la pantalla LCD para encender la cámara. Deslice el interruptor de modo para seleccionar el modo # (imagen fija). Pulse el botón SELECT PLAY/REC para seleccionar el modo de grabación. Mantenga pulsado el botón SNAPSHOT hasta la mitad de su recorrido. 640 FINE [ El indicador ? se vuelve verde cuando la imagen capturada queda enfocada. L Para ver la imagen recién grabada Seleccione A tras tomar la fotografía.
Reproducción de archivos Reproducción de vídeo/imágenes fijas 3 Seleccione el archivo que desee. REPRODUCCIÓN VÍDEO 1 Deslice el interruptor de modo para seleccionar el modo ! (vídeo) o # (imagen fija). L Para el visionado en el televisor Vea la página 19. 2 L Para consultar la información del Pulse el botón SELECT PLAY/ REC para seleccionar el modo de reproducción. archivo Pulse el botón INFO cuando la reproducción esté en pausa.
Visionado de imágenes en el televisor Preparativos: • Ajuste [CAMBIAR E/S ANALG] en [SALIDA] desde MENU. (Preajuste de fábrica = [SALIDA]) • Apague todas las unidades. Conector AV Conector de CC Cable AV A la toma de CA Conector de entrada AV Adaptador de CA NOTAS • También se pueden conectar los cables mediante los conectores de la base de conexión Everio. El cable S-Video (opcional) permite una calidad de reproducción aún mayor. (p.
EDICIÓN/COPIA Gestión de archivos PRECAUCIÓN No extraiga el soporte de grabación ni realice ninguna otra operación (por ejemplo, apagar la alimentación) mientras se accede a los archivos. Asimismo, asegúrese de utilizar el adaptador de CA suministrado, ya que los datos del soporte de grabación se pueden dañar si la batería se agota durante la operación. Si los datos del soporte de grabación se dañan, deberá formatear el soporte de grabación.
6 Seleccione [EJECUTAR Y SALIR] (al ejecutar [ELIMINAR]) o [SÍ] (al ejecutar [PROTEGER]). ¿ELIMINAR? EJECUTAR Y SALIR SALIR VOLVER Eliminación/protección de todos los archivos Después de realizar los pasos 1-2 (p. 20) 3 4 Seleccione [ELIMINAR TODO] o [PROT.TODO]. Cuando aparezca [¿ELIMINAR TODO?] o [¿PROTEGER TODO?], seleccione [SÍ]. ¿ELIMINAR TODO? (EXCEPTO ARCHIVOS PROTEGIDOS) SÍ NO L Para salir de la pantalla Seleccione [SAL.].
Copia de archivos Tipos de copia y dispositivos conectables La cámara Se pueden copiar vídeo o imágenes fijas de la unidad de disco duro a la tarjeta microSD o a la inversa en la propia cámara. Conexión con una grabadora de DVD Preparativos: Cierre la pantalla LCD para apagar la cámara. Grabadora de DVD Conector USB Cable USB Grabadora de DVD (CU-VD3) Se pueden copiar en discos DVD archivos de vídeo o de imagen fija grabados en esta cámara.
FUNCIONAMIENTO DE PC Copia de seguridad de archivos en un PC con Windows® Instale el software suministrado con la cámara al PC. Puede hacer una copia de seguridad de los archivos en el PC con una sola operación, editar los archivos en el PC y crear discos. Aunque no instale el software, puede hacer una copia de seguridad de los archivos en el PC. (p. 27) Requisitos del sistema Para ver una lista de los grabadores de DVD compatibles, visite el sitio web de CyberLink: http://www.cyberlink.
Copia de seguridad de archivos en un PC con Windows® (continuación) Instalación del software Lea el “CONTRATO DE LICENCIA DEL SOFTWARE JVC” en el manual de instrucciones del CD-ROM antes de instalar el software. El CD-ROM suministrado con la cámara contiene el siguiente software. • CyberLink DVD Solution Completo software de aplicación que consta de los siguientes tres programas de software. PowerCinema NE for Everio El principal software de gestión de archivos.
4 Seleccione el idioma deseado y, a continuación, haga clic en [OK]. Conexión de la cámara al PC Preparativos: Cierre la pantalla LCD para apagar la cámara. 5 Conector USB Haga clic en [Sí]. Se inicia la instalación del software. Cable USB A la toma de CA 6 Haga clic en [Finalizar]. L Cuando finaliza la instalación El software instalado se muestra en [Todos los programas].
Copia de seguridad de archivos en un PC con Windows® (continuación) L Cuando haya finalizado la operación Siga siempre los procedimientos descritos a continuación para desconectar la cámara o apagar la alimentación de la cámara y el PC. De lo contrario, podría dañar la cámara y el PC. 1) Compruebe que la lámpara de acceso de la cámara no esté encendida ni parpadee. (Si la lámpara de acceso se enciende o parpadea, espere a que se apague antes de seguir adelante.
3 Haga clic en [EVERIO_HDD] o [EVERIO_SD]. Cuando desaparezca la barra de progreso, el proceso se habrá completado. 5 Seleccione la carpeta de la que desea hacer una copia de seguridad y, a continuación, arrástrela y suéltela en la carpeta que creó en el paso 1. • SD_VIDEO: Carpeta que contiene los Copia de seguridad de archivos en el PC sin usar el software archivos de vídeo.
Otras operaciones de PC con Windows® Digital Photo Navigator 1.5 Uso adicional del software Para obtener más información acerca de las operaciones del software, consulte los Tutoriales de cada uno de los programas de software o la correspondiente Guía del usuario. PowerCinema NE for Everio 1 2 Haga doble clic en el icono de PowerCinema NE for Everio. Inicie PowerCinema NE for Everio. Haga clic en [Tutorial]. PowerProducer 3 NE La Guía del usuario está incluida en el CDROM en formato PDF.
Estructura de carpetas y extensiones X = número Soporte de grabación [DCIM] Contiene las carpetas de imágenes fijas. [XXXJVCSO] [PIC_XXXX.JPG] [PIC_XXXX.JPG] Archivo de imágenes fijas [XXXJVCSO] [XXXJVCSO] Contiene las carpetas de archivos de vídeo. [SD_VIDEO] [MGR_INFO] Información de gestión* del soporte en conjunto [PRGXXX] [PRGXXX.PGI] [MOVXXX.MOD] [MOVXXX.MOI] Información de gestión* Archivo de vídeo Información de gestión* de los archivos de vídeo [PRGXXX] [PRGXXX] [EXTMOV] [MOV_XXXX.
Copia de seguridad de archivos en un Macintosh® Puede hacer una copia de seguridad de los archivos de la cámara en el equipo. Requisitos del sistema Hardware: Macintosh debe llevar incorporado de serie un conector USB 2.0 Sistema operativo: Mac OS X (v10.3.9, v10.4.2 a v10.4.10) Conexión de la cámara al Macintosh Preparativos: Cierre la pantalla LCD para apagar la cámara. NOTAS • No desconecte nunca el cable USB mientras la lámpara de acceso esté encendida o parpadee.
Copia de seguridad de archivos en un Macintosh Preparativos: Conecte la cámara al equipo con el cable USB. (p. 30) 1 2 3 4 5 • DCIM: Carpeta que contiene los archivos de imagen fija. Si desea hacer una copia de seguridad de cada archivo de forma individual, abra esta carpeta y, a continuación, arrastre y suelte uno a uno cada archivo, como [PIC_0001.JPG]. En el equipo, cree una carpeta para almacenar los archivos de seguridad. Abra la pantalla LCD para encender la cámara.
Información de asistencia al cliente Póngase en contacto con nosotros para obtener información acerca del software suministrado El uso de este software está autorizado según los términos estipulados en la licencia del software. JVC Cuando se ponga en contacto con la oficina o agencia de JVC más cercana de su país (consulte la red de servicio internacional de JVC en http://www.jvc-victor.co.jp/english/worldmap/ index-e.html) en relación con este software, tenga a mano la siguiente información.
INFORMACIÓN ADICIONAL Solución de problemas La cámara es un dispositivo controlado por una microcomputadora. El ruido externo y las interferencias (de un televisor, una radio, etc.) podrían impedir su correcto funcionamiento. Los siguientes fenómenos no son fallos de funcionamiento. • La cámara se calienta cuando se utiliza de forma prolongada. • La batería se calienta durante la carga.
Solución de problemas (continuación) Problema Grabación Reproducción Otros problemas 34 Acción • Ajuste [FOCUS] en [AUTO]. • Limpie el objetivo y compruebe de nuevo el enfoque. • La velocidad de toma continua disminuirá si se realizan – 34 • Seleccione correctamente el soporte de grabación. • Para ver las imágenes en un televisor, ajuste el modo de entrada – 19 Durante la reproducción de vídeo, el indicador F parpadea. • La temperatura de la cámara va aumentando.
Limpieza Antes de proceder a la limpieza, apague la cámara y extraiga la batería y el adaptador de CA. L Para limpiar el exterior Pase con cuidado un trapo suave. Si la cámara está muy sucia, humedezca el trapo con un jabón suave diluido, escúrralo bien y limpie la cámara. A continuación, pase un trapo seco. L Para limpiar la pantalla LCD Pase con cuidado un trapo suave. Procure no dañar la pantalla. L Para limpiar el objetivo Límpielo suavemente con papel de limpieza para objetivos.
Indicaciones de advertencia Significado/acción • Muestra la carga restante de la batería.
Especificaciones Cámara L Aspectos generales Fuente de alimentación eléctrica CC 11 V (con adaptador de CA) CC 7,2 V (con batería) Consumo eléctrico Aproximadamente 3,7 W* * Cuando la luz de fondo de la pantalla está ajustada en modo de [ESTÁNDAR].
Especificaciones (continuación) Adaptador de CA Requisito de alimentación eléctrica CA 110 V a 240 Vd, 50 Hz/60 Hz Salida ,1A CC 11 V § Mando a distancia Fuente de alimentación eléctrica CC 3 V Duración de la batería 1 año aproximadamente (dependiendo de la frecuencia de uso) Distancia de funcionamiento Dentro de 5 m Temperatura de funcionamiento 0°C a 40°C Dimensiones (anchura x altura x fondo) 42 mm x 14,5 mm x 91 mm Peso Aproximadamente 30 g (con batería) El diseño y las especificaciones están sujetas
Tiempo de grabación aproximado (minutos) (para vídeo) Soporte de grabación HDD Tarjeta microSD 30 GB 4 GB ULTRAFINA 430 57 FINA 640 85 NORMAL 850 113 ECONÓMICA 2250 298 Calidad Número aproximado de imágenes almacenables (para imágenes fijas) Soporte de grabación HDD Tarjeta microSD 30 GB 256 MB 512 MB 1 GB 2 GB 4 GB 3072 x 2304 / FINA 9220 75 155 310 625 1235 3072 x 2304 / ESTÁNDAR 9999 115 230 465 940 1850 2592 x 1944 / FINA 9999 110 220 445 900 1770 2592 x 1
Precauciones Adaptador de CA Si utiliza el adaptador de CA en países fuera de los EE.UU. El adaptador de CA suministrado tiene una función de selección automática de tensión en la escala de corriente alterna de 110 V a 240 V. USO DEL ENCHUFE ADAPTADOR DE CA En caso de conectar el cable de alimentación de la unidad a un tomacorriente de CA que no sea de la serie American National Standard C73, emplee un enchufe adaptador de CA, denominado “Siemens Plug”, como el mostrado.
Equipo principal • Por seguridad, NO DEBE ... abrir el chasis de la cámara. ... desmontar o modificar el equipo. ... permitir que productos inflamables, agua u objetos metálicos entren en el equipo. ... extraer la batería ni desconectar el suministro de energía con el aparato encendido. ... dejar la batería colocada cuando la cámara no se utilice. ... colocar sobre el aparato ninguna fuente de llama sin protección, tales como velas encendidas. ... exponer el equipo a goteos o salpicaduras. ...
MEMO 42
43
Términos A M Adaptador de CA ............................................. 14, 40 Ajuste del reloj ....................................................... 14 Macintosh .............................................................. 30 Mando a distancia ........................................... 10, 15 B P Base de conexión Everio ......................................... 9 Batería ....................................................... 14, 15, 40 Pantalla LCD ..........................................