Getting Started Dear Customers Thank you for purchasing this JVC product. Before use, please read the Safety Precautions and Cautions on P.2 and P.25 to ensure safe use of this product. This product comes with a “Basic User Guide” (this manual) and a “Detailed User Guide”. Detailed User Guide . Explains the ways of shooting in various situations and the useful features.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Index Playing Back on TV ......................... 15 Safety Precautions ............................ 2 Index ................................................. 4 ▶Copying ................................. 16 Verifying the Accessories .................. 4 Copying Files .................................. 16 Names of Parts and Functions .......... 5 Dubbing Files by Connecting to a DVD Recorder or VCR ............................. 17 ▶Getting Started ........................ 6 Copying to Computer .............
Names of Parts and Functions 9 0a 1 2 3 4 5 AV . 6 78 A Lens/Lens Cover B Light C Stereo Microphone D LCD Monitor Turns the power on/off by opening and closing. E Slider Selects an image or item. F OK Button Confirms the selected image or item. G Operation Buttons Functions differently according to the operation. b c d e f g h i j k l m n o p q N UPLOAD/EXPORT (Upload/Export to iTunes) Button Recording :Takes videos in YouTube or iTunes format.
Getting Started Charging the Battery Pack 1 Attach the battery pack. 2 Connect the DC * The battery pack is not charged at the time of purchase. • Align the top of the battery with the mark on this unit, and slide in until the battery clicks into place. terminal. Cover AC Adapter To AC Outlet (110V to 240V) Charging Lamp ■ To detach the battery pack 3 Plug in the power. (Base) Charging Lamp Charging in progress: Blinks Charging finished: Goes out . CAUTION Be sure to use JVC battery packs.
1 Pull back the belt 2 Adjust the length . Getting Started Recording Grip Adjustment 3 Attach the belt Using as a Hand Strap Playback Remove the strap and loop it around your wrist. While pressing A, pull B and remove the strap. Press and hold . Copying When attaching the hand strap, insert C until it clicks into place. Further Information ● For more information, refer to the Detailed User Guide http://manual.jvc.co.jp/index.
Inserting an SD card When a commercially available SD card is inserted, recordings can still be made to the card without stopping when the remaining recording time on the built-in memory runs out. 1 Close the LCD monitor. 2 Open the cover. (Base) 3 Insert an SD card. Label * Turn off the power of this unit . before inserting or removing a card. ■ To remove the card Push the card inward once, then pull it out straight. (Base) . NOTE Operations are confirmed on the following SD cards.
① Display the menu. Touch . ② Select “MEDIA SETTINGS” and touch . Getting Started Recording and playback can be performed on a card when “REC MEDIA FOR VIDEO” or “REC MEDIA FOR IMAGE” of media settings is set to “SD CARD”. ■ To use SD cards that have been used on other devices Format (initialize) the card using “FORMAT SD CARD” from media settings. All data on the card will be deleted when it is formatted. Copy all files on the card to a PC before formatting. ① Touch to display the menu.
Clock Setting 1 5 Open the LCD monitor. Select the region where you live and touch . ● The city name and time difference is displayed. CLOCK/AREA SETTING AV . ● The unit turns on. When the LCD monitor is closed, the unit turns off. GMT SAVE JAN. 1. 2009 10:00 AM QUIT . 2 Select “YES” and touch when “SET DATE/TIME!” is displayed. ① Select Slider NOTE ● ● SET DATE/TIME! YES NO SET OK MENU ② Touch Operation Buttons .
Set the clock with “CLOCK ADJUST” from the menu. ① Display the menu. Getting Started ■ To reset the clock ■ To change the display language The language on the display can be changed. Recording ① Display the menu. Touch Touch . ② Select “CLOCK ADJUST” and touch . VIDEO . ② Select “DISPLAY SETTINGS” and touch .
Recording Video Recording You can record without worrying about the setting details by using the auto mode. Before recording an important scene, it is recommended to conduct a trial recording. the Select 1 Open 2 video 3 Check if the recording mode is lens cover. mode. Auto. the mode is Manual, • Iftouch the button to switch. mode changes between • The auto and manual with every touch. Press Touch AV Zooming 4 Start recording. • Press again to stop. (Wide angle) (Telephoto) Press .
Getting Started Reducing Camera Shake (Video Recording) When the image stabilizer is set, camera shake during recording can be effectively reduced. (White):Image stabilizer ① (Green):Image stabilizer ② (White):OFF Touch NOTE ● ● Recording The setting switches with every touch. . A:Reduces camera shake. B:Reduces camera shake at wide angle effectively. It is also effective for recording while walking.
Playback Playing Back/Deleting Files on this Unit Select and play back the recorded videos or still images from an index screen (thumbnail display). The contents of the media selected in media settings ( P.9) are displayed on the index screen. Volume adjustment during video playback 1 Select the playback mode. Turn down the volume Press Turn up the volume 2 Select video or still image mode. Press 3 Play back a file. ■ To delete unwanted files ① Select Media being played back ① Select 8+&'1 2.
Getting Started Playing Back on TV 1 Connect to a TV. * Refer also to the instruction manual of the TV. ● Press the Power button for more than 2 seconds to turn off this unit. Video Input Video Input Recording Yellow To AV Terminal White Audio Input (L) AV AV Cable (Provided) Red Audio Input (R) AV Connect the AC adapter. ( P.6) ● This unit powers on automatically when the AC adapter is connected. 3 Select the TV input switch. 4 Play back a file. ( P.
Copying Copying Files You can create discs or copy the files on this unit by connecting it to various devices. ● Copying files by connecting to a DVD writer is not supported. Device DVD Recorder Dubbing Files by Connecting to a DVD Recorder or VCR . . Referen ce Page . 3 3 3 P.17 3 - - P.17 - 3* 3 P.18 . VCR . Copying to PC . * For details on how to create a disc using a computer, refer to the Detailed User Guide.
Getting Started Dubbing Files by Connecting to a DVD Recorder or VCR You can dub videos in standard quality by connecting to a DVD recorder or VCR. Refer also to the instruction manual of the TV, DVD recorder, VCR, etc. 1 Connect to a VCR/DVD recorder. Press the Power button for more than 2 seconds to turn off this unit.
Copying to Computer Verifying System Requirements (Guideline) Windows PC You can copy files to a PC using the provided software. Right-click on “Computer” (or “My Computer”) in the “Start” menu and select “Properties” to check the following items. ■ Windows Vista Windows Vista Home Basic or Home Premium (Pre-installed versions only) Service Pack 2 Processor: Intel Core Duo CPU 1.5 GHz or higher Intel Pentium 4 CPU 1.6 GHz or higher Intel Pentium M CPU 1.
Getting Started Mac Computer Copy the video and still image files to a computer using the following method. column display icon Recording ① Close the LCD monitor and connect to a computer. ( P.20) ② Open the LCD monitor and display the USB menu. ③ Select “PLAYBACK ON PC” and touch . ④ Double-click on the "EVERIO_MEM" or "EVERIO_SD" icon on the desktop. ⑤ Click on the column display icon. ⑥ Copy the files to any folder in the computer (desktop, etc). Copy the files .
Backing Up All Files Before making backup, make sure that there is enough free space in the PC's HDD. 1 4 Select the volume. Connect the USB cable and AC adapter. 1 Click To USB Terminal 2 Click . To DC Terminal 5 Start backup. Saving destination (PC) USB Cable (Provided) Click . AC Adapter 6 After backup is complete, click “OK”. If you encounter any problems with the provided software Everio MediaBrowser, please consult the "Pixela User Support Center". To USB Terminal .
Getting Started Further Information Using the Menu You can configure various settings using the menu. 1 3 Select the desired setting and touch . Display the menu. VIDEO OFF AGC Touch . 2 QUIT . The menu differs according to the mode in use. ■ To exit the screen Touch (quit). Select the desired menu and touch . ■ To return to the previous screen VIDEO REGISTER EVENT Touch “)”. VIDEO QUALITY ZOOM ■ To display the help file GAIN UP Touch “*”.
Recordable Time/Number of Images You can check the video recording time by pressing the , (Power/Information) Button.
■ Reset this unit when it does not function properly or when “... Error” appears on the screen. Getting Started Before requesting service, consult the following chart or the "Troubleshooting" section in the Detailed User Guide. If the solutions indicated in the chart do not solve the problem, consult your nearest JVC dealer or JVC service center for instructions. Refer also to the FAQ of new products on JVC’s website. Refer also to the Q&A information of new products on JVC’s website (http://www.jvc.com).
● The lamp does not flash during battery pack charging. ● Other problems ● The slider and operation buttons do not work. ● ● This unit heats up. Check the remaining battery power. (When the battery pack is fully charged, the lamp does not flash.) When charging in either a hot or cold environment, ensure that battery is being charged within the permitted temperature range. (Otherwise, charging may stop to protect the battery pack.) P.12 Remove any gloves.
ATTENTION: Recording Medium The supplied battery pack is a Terminals lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: • • Be sure to follow the guidelines below to prevent corruption or damage to your recorded data. • Do not bend or drop the recording medium, or subject it to strong pressure, jolts or vibrations. • Do not splash the recording medium with water.
Main Unit • For safety, DO NOT ... open the camcorder’s chassis. ... disassemble or modify the unit. ... allow inflammables, water or metallic objects to enter the unit. ... remove the battery pack or disconnect the power supply while the power is on. ... leave the battery pack attached when the camcorder is not in use. ... place naked flame sources, such as lighted candles, on the apparatus. ... expose the apparatus to dripping or splashing. ...
Getting Started Specifications Camera GZ-MS230 GZ-MS250 Power consumption 1.5 W (when LIGHT is set to “OFF” and LCD BACKLIGHT is set to “STANDARD”), Rated Current Consumption: 1.8A Dimensions (mm) 52 x 62 x 110 (2-1/8" x 2-1/2" x 4-3/8") (W x H x D: excluding grip belt) Mass Approx. 200 g (0.44 lbs) (camera only), Approx. 230 g (0.
Terms A AC adapter ................................ 6, 25 Apple ............................................. 19 AV Connection ......................... 15, 17 B Battery Pack .............................. 6, 25 C CD-ROM ........................................ 19 Clock Adjust ................................... 11 Copy (Back Up) ................. 16, 17, 20 D L Date/Time Setting .......................... 10 Deleting Files ................................. 14 Dubbing (Duplicate) ...................
Estimado cliente: Gracias por haber adquirido este producto JVC. Antes de su uso, lea las precauciones de seguridad y advertencias en P.2 y P.25 para garantizar un uso seguro de este producto. Este producto viene con una “Guía básica del usuario” (este manual) y una “Guía detallada del usuario”. Guía detallada del usuario Explican las formas de filmar en distintas situaciones y las funciones más útiles de la cámara.
Precauciones de seguridad ADVERTENCIA: PARA EVITAR RIESGO DE INCENDIOS O ELECTROCUCIONES, NO EXPONGA ESTE APARATO A LA LLUVIA O HUMEDAD. NOTAS: • La placa de valores nominales y la precaución de seguridad se encuentran en la parte inferior y/o en la parte posterior de la unidad principal. • La placa del número de serie se encuentra en el compartimiento de la batería.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 1. 2. 3. 4. 5. 6. 7. Lea estas instrucciones. Conserve estas instrucciones. Preste atención a las advertencias. Siga todas las instrucciones. No utilice este aparato cerca del agua. Limpie sólo con paño seco. No bloquee ninguna abertura de ventilación. Instale de acuerdo con las instrucciones del fabricante. 8. No lo instale cerca de ninguna fuente de calor tales como, radiadores, calefactores, cocinas, u otros aparatos (incluyendo amplificadores) que produzcan calor.
Índice Reproducción en un televisor .......... 15 Precauciones de seguridad ............... 2 Índice ................................................. 4 ▶Copia ..................................... 16 Comprobación de los accesorios ...... 4 Copia de archivos ........................... 16 Nombres de piezas y funciones ........ 5 Copia de archivos mediante la conexión a una grabadora de vídeo o ▶Introducción ............................. 6 DVD .................................................
Nombres de piezas y funciones 9 0a 1 2 3 4 5 AV . 6 78 A Lente/cubierta de la lente B Luz C Micrófono estéreo D Monitor LCD Enciende y apaga la alimentación si se abre o se cierra. E Control deslizante Selecciona una imagen u opción. F Botón OK Confirma la imagen u opción seleccionada. G Botones de funcionamiento Funciona de manera diferente según la operación realizada. H Botón Menu (menú) ( P.21) I Altavoz J Luz ACCESS (de acceso) Se enciende o parpadea durante la grabación o reproducción.
Introducción Carga de la batería 1 Sujete la batería. * La cámara se suministra con la batería descargada. Alinee la parte superior de la batería con la marca de esta unidad y deslícela hasta que se oiga un clic. Para extraer la batería el terminal 2 Conecte de CC. Cubierta Adaptador de CA A salida de CA (110 V a 240 V) Luz indicadora de carga 3 Encienda la alimentación. Luz indicadora de carga (base) Carga en curso: Parpadea Carga terminada: Se apaga .
Deslice la correa hacia atrás . Regule la longitud Introducción Grabación Ajuste de la correa de mano Ajuste la correa Uso de la correa de muñeca Reproducción Retire la correa y colóquela en su muñeca. Mientras presiona A, deslice hacia atrás B y retire la correa. Mantenga presionado . Copia Al ajustar la correa de muñeca, introduzca C hasta que se oiga un clic. Más información ● Para obtener más información, consulte la Guía detallada del usuario http://manual.jvc.co.jp/index.
Introducción de una tarjeta SD Si se introduce una tarjeta SD comercialmente disponible, se pueden realizar grabaciones en la tarjeta sin que haya que detener el proceso cuando se agota el tiempo de grabación restante en la memoria integrada. 1Cierre el monitor LCD. 2 Abra la cubierta. (base) 3 Introduzca una tarjeta SD. Etiqueta * Apague la alimentación de esta unidad antes de introducir o extraer una tarjeta. .
① Visualice el menú. Pulse MENU ② Seleccione “CONFIG. MEDIOS” y presione . VÍDEO ① Presione para ver el menú. ② Seleccione “CONFIG. MEDIOS” con el control deslizante y presione . ③ Seleccione “FORMATEAR TARJETA SD” y presione . CONFIG. PANTALLA AJUS.RELOJ CONFIG. MEDIOS SOPORTE GRAB. VÍDEO SOPORTE GRAB. FOTO FORMATEAR MEM INT CONFIG. BÁSICA CONFIG. CONEXIÓN CONFIG. MEDIOS FORMATEAR TARJETA SD ? AJUSTE SALIR BORAR MEM INTEGRADA . ③ Seleccione “SOPORTE GRAB. VÍDEO” o “SOPORTE GRAB.
Ajuste del reloj 1 5 Abra el monitor LCD. Seleccione la región en la que vive y presione . ● Se mostrará el nombre de la ciudad y la diferencia horaria. CONFIGURACIÓN RELOJ/ÁREA AV . ● Se enciende la unidad. Si se cierra el monitor LCD, se apaga la unidad. GMT JAN. 1.2009 10:00AM GUARDA SALIR . 2 Seleccione “SÍ” y presione cuando se visualice “¡AJUSTE FECHA/HORA!”. NOTA ● Seleccione Control deslizante ● ¡AJUSTE FECHA/HORA! SÍ NO ● AJUSTE OK MENU ● Pulse .
Ajuste el reloj con “AJUS.RELOJ” del menú. ① Visualice el menú. ■ Para cambiar el idioma de visualización Se puede cambiar el idioma en el que se muestra la información de la pantalla. Introducción ■ Para restablecer el reloj Grabación ① Visualice el menú. Pulse OK MENU . ② Seleccione “AJUS.RELOJ” y presione . Pulse OK ② Seleccione “CONFIG. PANTALLA” y presione . VÍDEO CONFIG. PANTALLA AJUS.RELOJ VÍDEO CONFIG. BÁSICA Reproducción %#/$ #761 /'&+1 )4#$ CONFIG. CONEXIÓN CONFIG.
Grabación Grabación de vídeo Si se utiliza el modo auto, se pueden realizar grabaciones sin tener en cuenta los ajustes. Antes de grabar una escena importante, se recomienda realizar una grabación de prueba. que el modo de la cubierta el 1 Abra 2 Seleccione 3 Compruebe grabación sea Auto. de la lente. modo video. Si el modo es Manual , presione el botón para cambiar de modo. El modo cambia entre auto y manual con cada pulsación. Pulse Pulse Zoom 4 Inicie la grabación.
(blanco) : Estabilizador de imágenes (verde) : Estabilizador de imágenes (blanco) :OFF Pulse El ajuste varía con cada pulsación. . A:Reduce la vibración de la cámara. B:Reduce la vibración de la cámara en el gran angular de manera eficaz. También es eficaz para la grabación durante una caminata. NOTA ● Se recomienda ajustar el estabilizador de imágenes en apagado cuando se filma un sujeto con poco movimiento utilizando la unidad sobre un trípode.
Reproducción Reproducción y eliminación de archivos de esta unidad Seleccione y reproduzca los vídeos grabados o imágenes fijas desde la pantalla de índice (pantalla de vistas en miniatura). Los contenidos de los soportes seleccionados en los ajustes de soportes ( P.9) se muestran en la pantalla de índice. 1Seleccione el modo reproducción. Pluse Ajuste del volumen durante la reproducción de video Baje el volumen Suba el volumen el modo video o imagen 2 Seleccione fija. Pluse 3 Reproduzca un archivo.
Introducción Reproducción en un televisor Conecte el dispositivo a un televisor. Reproducción Grabación * Consulte también el manual de instrucciones del televisor. ● Presione el botón de encendido durante más de 2 segundos para apagar esta unidad. Amarillo Entrada de video Al terminal AV Entrada de video blanco Entrada de audio (L, izquierda) Rojo Cable AV Entrada de audio (R, derecha) (proporcionado) TV . 2 Conecte el adaptador de CA. ( P.
Copia Copia de archivos Se pueden crear discos o copiar los archivos en esta unidad si se la conecta a diversos dispositivos. ● No se puede realizar la copia de archivos conectando la unidad a un escritor de DVD. Dispositivo Grabadora de DVD Copia de archivos mediante la conexión a una grabadora de vídeo o DVD . . Página de referencia . 3 3 3 P.17 3 - - P.17 - 3* 3 P.18 . VCR . Copia a un PC .
Se pueden copiar vídeos en calidad estándar si se conecta la cámara a una grabadora de vídeo o DVD. Consulte también el manual de instrucciones del televisor, grabadora de vídeo, DVD, etc. ● Conecte el dispositivo a una grabadora de vídeo o DVD. Presione el botón de encendido durante más de 2 segundos para apagar esta unidad.
Copia al PC Comprobación de los requisitos del sistema (instrucciones) Ordenador con Windows Puede copiar archivos a un ordenador utilizando el software proporcionado. Haga clic con el botón secundario en “Equipo” (o “Mi PC”) del menú “Inicio” y seleccione “Propiedades” para comprobar las siguientes opciones.
Introducción Mac Copie los archivos de vídeos e imágenes fijas a un ordenador siguiendo este método. Cierre el monitor LCD y conecte la unidad a un ordenador. ( P.20) Abra el monitor LCD y visualice el menú USB. Seleccione “REPRODUCIR EN PC” y presione . Haga doble clic en el icono "EVERIO_MEM" o "EVERIO_SD" del escritorio. Haga clic en el icono de visualización en columnas. Copie los archivos a cualquier carpeta del ordenador (escritorio, etc).
Copia de seguridad de todos los archivos Antes de realizar copias de seguridad, asegúrese de que dispone de suficiente espacio libre en el disco duro del PC. 1 4 Seleccione el volumen. Conecte el cable USB y el adaptador de CA. 1 Clic Al terminal USB 2 Clic Al terminal de CC . 5 Inicie la copia de seguridad. Destino de almacenamiento (PC) Cable USB (proporcionado) Clic Adaptador de CA . 6 Después de que se haya completado la copia de seguridad, haga clic en “OK”.
Uso del menú Se pueden configurar varios ajustes utilizando el menú. 1 3 Seleccione el ajuste que desee y presione . Visualice el menú. Introducción Más información VÍDEO OFF AGC Pulse 2 SALIR . El menú es diferente según el modo que esté en uso. ■ Para salir de la pantalla Presione (salir). Seleccione el menú que desee y presione . ■ Para volver a la pantalla anterior VÍDEO Presione “)”. REGISTRAR EVENTO CALIDAD DE VÍDEO ■ Para ver el archivo de ayuda ZOOM Presione “*”.
Tiempo de grabación/número de imágenes Es posible comprobar el tiempo de grabación de vídeo presionando el botón , (alimentación/información).
■ Reinicie esta unidad si no funciona adecuadamente o si “... Error” aparece en pantalla. ① Apague la unidad. (cierre el monitor LCD). ② Retire el adaptador de CA y la batería de esta unidad, colóquelos nuevamente y encienda la alimentación. Problema Problema Grabación ● La batería se está cargando. P.6 ● Compruebe el botón / . Ajuste el modo grabación con el botón +. P.12 P.14 Apague esta unidad, espere unos instantes y enciéndala nuevamente.
● La luz no parpadea durante la carga de la batería. ● Otros problemas ● El control deslizante y los botones no funcionan. ● ● La temperatura de esta unidad aumenta. Compruebe la carga restante de la batería. (si la batería ya está totalmente cargada, la luz no parpadea). Si realiza una carga en un entorno con condiciones de temperatura elevada o baja, asegúrese de que la batería se esté cargando dentro del rango de temperaturas permitido.
Introducción Soporte de grabación • • No doble ni tire el soporte de grabación, ni Enchufe adaptador Baterías La batería suministrada es Terminales una batería de iones de litio. Antes de utilizar la batería suministrada o una batería opcional, lea las precauciones siguientes: • Para evitar riesgos ... no queme la batería. ... no provoque cortocircuitos en los terminales. Manténgala alejada de objetos metálicos cuando no se utilice.
Equipo principal • Por seguridad, NO DEBE ... abrir el chasis de la cámara. ... desmontar o modificar el equipo. ... permitir que productos inflamables, agua u objetos metálicos entren en el equipo. ... extraer la batería ni desconectar el suministro de energía con el aparato encendido. ... dejar la batería colocada cuando la cámara no se utilice. ... colocar sobre el aparato ninguna fuente de llama sin protección, tales como velas encendidas. ... exponer el equipo a goteos o salpicaduras. ...
Introducción Especificaciones Cámara Nombre del modelo GZ-MS230 GZ-MS250 Consumo eléctrico Dimensiones (mm) 1,5 W (si la luz se ajusta en “OFF” y la retroiluminación del monitor se ajusta en “ESTÁNDAR”), Consumo promedio: 1,8A 52 x 62 x 110 (2-1/8" x 2-1/2" x 4-3/8") (W x H x D: sin incluir la correa de mano) Masa Aprox. 200 g (0,44 lbs) (solo la cámara), Aprox.
Términos A Adaptador de CA ....................... 6, 25 Ajuste de la fecha/hora .................. 10 Ajuste del idioma ........................... 11 Ajustes de menú ............................ 21 Apple ............................................. 19 B Batería ....................................... 6, 25 C Cable USB ..................................... 20 CD-ROM ........................................ 19 Conexión AV ............................ 15, 17 Configuración del reloj ...................