User manual

J
Time Code (I)/User’s Bit (J) Display
0
Displays the time code (hour: minute:
second:
frame) or user’s bit data recorded in
the SD card being played back.
0
Example of time code display:
.
00:00:00:00
※
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
0
Example of user’s bit display:
.
FF EE DD 20
Memo :
0
You can specify whether to display the time
code,
user’s bit, or turn off the display in [TC/UB]
of [Main Menu] B [LCD/VF] B [Display
Settings].
K
Event/Warning Display Area
Displays error messages.
L
Media Status
PLAY
: Playing
STILL : Still picture playback mode
FWD * : High-speed playback in the
forward direction (* playback
speed: 5x, 15x, 60x, or 360x)
REV * : High-speed playback in the
reverse direction (* reverse
playback speed: 5x, 15x, 60x, or
360x)
STOP : Stop mode
P.OFF : Power OFF
M
Check Mark
Displayed when the currently played clip is
selected.
N
OK Mark
Displayed when OK mark has been appended.
O
Clip Information
Displays current clip number/total number of
clips.
Status Screen
0
This screen allows you to check the current
settings.
0
To display the status screen, press the
[STATUS
] button in the normal screen.
0
The status display differs according to the
operation mode (two types).
0
Press the [STATUS
] button to switch to the
display screen.
0
Press
the [MENU/THUMB] button at each status
screen (other than the [Camera 1]/[Camera 2]
screen) to enter the setting screen.
0
Use the cross-shaped button (HI) to switch
screens as follows:
.
* These are screen examples. The contents
displayed are different depending on the
settings.
30
Display Screen
Others