ENGLISH ESPAÑOL DVD RECEIVER WITH MONITOR RECEPTOR DVD CON MONITOR RECEPTEUR DVD ET MONITEUR FRANÇAIS KD-AV7010 Detachable MAIN ATT SUB ZOOM DUAL AVOUT VOL ASPECT MENU TOPMENU OK RETURN TUNER DISC AV 1 2 4 5 6 7 8 9 11/0 12/+10 GUI SET UP 10 3 VOLUME • This unit is equipped with the display demonstration. To cancel it, see page 14. • Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la página 14.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CAUTIONS on the monitor • DO NOT install any unit in locations where; – it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident. – it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident. – it may obstruct visibility. • DO NOT operate any unit while manipulating the steering wheel, as this may result in a traffic accident. • The driver must not watch the monitor while driving.
ENGLISH Contents How to reset your unit ..................................... 2 Important! (How to read this manual) ............. 3 Introduction—Playable Discs ....................... 5 Quick Guide—How to Use the Controls ...... 6 Remote controller ............................................ 6 Main unit (front) .............................................. 8 Preparation (Remote Controller—RM-RK220) .............. 9 Operation Methods ...................................... 10 Basic Operations ............
Discs you can play You can play back the following discs on this unit: • DVD Video: whose video format is NTSC and whose region code is “1.” – DVD-Rs and DVD-RWs recorded in the DVD-Video format can also be played (see page 75). • Video CD (VCD)/Audio CD • MP3: CD-Rs or CD-RWs including MP3 files with the file extension code . They must be recorded in the format compliant with ISO 9660 Level 1, ISO 9660 Level 2, Romeo, and Joliet.
ENGLISH Quick Guide—How to Use the Controls ○○○○○○○○○ Remote controller General operations Buttons To do: Turn on the main unit. ATT Turn off the main unit. Attenuate sounds. MAIN ATT SUB Select the band. TUNER Select “TUNER” and “SIRIUS.” ZOOM DUAL DISC Select “DISC” and “CD-CH.” AV Select external components: TV = AV1 = AV2 = AVOUT VOL Adjust the volume. VOLUME ASPECT MAIN MENU Set the main or suboperation for Dual Mode. *1 SUB TOPMENU ZOOM GUI OK Turn on/off Dual Mode.
Disc operations To do: Buttons To do: Play. Select folders. *2 Pause. Select tracks. Stop. Search. ENGLISH Buttons CD changer operations Select chapters/tracks. Search. Selects folders. *2 OK OK then OK then OK Change discs. OK Select tracks. *2 1 2 4 5 3 6 7 8 9 10 11/0 12/+10 Select disc numbers. TV tuner operations Buttons To do: Search. Start Auto Search. Select audio language. Start Manual Search. Select subtitle language. Change preset channel numbers.
○○○○○○○○○○○○○○○○○○ ENGLISH Main unit (front) General operations Buttons CD changer operations To do: Buttons To do: Turn on the main unit. Select tracks. Turn off the main unit. Search. Attenuate sounds. then Change the sources. (The power will turn on automatically, if it was off.) Adjust the volume. Change the display information. (once): Display “DISC” = select discs. (twice): Display “FOLDER” = select folders.*1 TV tuner operations Buttons To do: Start Auto Search. Start Manual Search.
WARNINGS on the battery: 1 (back side) 2 With the + side facing upwards Lithium coin battery (CR2025) 3 • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. • Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. • Do not recharge, short, disassemble, or heat the battery or dispose of it in a fire. These behaviors may cause the battery to be overheated, crack or fire.
ENGLISH Operation Methods You can operate this unit using three types of operation methods. • This instruction manual explains the operations mainly using the Touch Panel Icons shown on the monitor. • Using the Touch Panel Icons directly (See “BLIND CONTROL” on page 46.) Press the Touch Panel Icons with your finger directly (if you wear a glove, take it off). Examples: The following is just an example. On the actual monitor screen, the playback picture is shown (while video source is played back).
ENGLISH • Using the Graphic User Interface (GUI) from the remote controller You can use the Graphic User Interface in the same way as you touch the panel icons. Examples: 2 1 3 GUI OK OK SET UP Display GUI on the monitor (the cursor—yellow frame— appears around the currently selected icon). • While one of the video sources is selected, the GUI function turns on and off at a press of the button. Move the cursor to an icon you want. Confirm.
ENGLISH Basic Operations CAUTION on the monitor : Do not open or close the monitor by hand. Do not apply any force to the monitor while it is moving. Such a behavior may damage the monitor loading mechanism. For turning on the power, use the buttons on the main unit and the remote controller. 3 Adjust the volume To change the monitor angle: Hold 1 Turn on the power 2 “WAITING” 1 scrolls on the display of the main unit (and the monitor comes out *).
○ ○ ○ ○ ○ ○ ○ ○ ○5 You can also set the clock system to 24 hours or 12 hours. 1 Exit While playing any source... ENGLISH Setting the clock To display the clock time: When the unit is turned off, the clock time is displayed on the display of the main unit for a while. On the main unit • If the touch panel icons are not shown on the monitor, touch the center portion of the monitor screen. 2 3 *2 *1 *1 When the unit is turned on...
○ ○ ○ ○ ○ ○ ○ ○ ○ Changing ○ ○ ○the ○graphic ○ ○screen○ ○ ○ ENGLISH Changing the source 1 While playing any source... You can select one of eight graphics in the picture view window. • See page 82 for each graphic screen. When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 30 seconds (except while playing a DVD/ VCD). To cancel it, select one of the graphic screen. 2 1 2 While playing any source... Ex.
You can display the level meter on the graphic screen, by selecting from four preset patterns. • While viewing the playback picture or display demonstration, you cannot show the level meter. 1 While playing any source... Ex. While listening to FM broadcast 2 The following level meters are displayed in sequence.
ENGLISH Radio Operations Dual Mode indicator (see page 33) SOURCE icon (see pages 14 and 33) Current band/Preset no. Station frequency FM reception mode Search mode Sound mode (see page 39) Surround/DSP mode (see page 36) Volume level appears when adjusted. Not available for AM. Available only after pressing “M” (below this icon). See page 53. See page 14. See page 14. See page 15. See page 39. See pages 43 – 52. Back to the beginning 16 16-19_KD-AV7010[J]f.
• To tune in to a station using Preset Search, first store your favorite stations into memory (6 stations for each band: see page 18). 3 Select Search Mode ENGLISH Listening to the Radio 1 Select the Tuner AUTO: To start Auto Search. MANUAL: To start Manual Search. PRESET: then To select preset station numbers (only possible after storing stations in memory). 4 Tune in to a station 2 Select a band (FM/AM) • For Auto Search, press either icon once. “Auto Search” begins.
ENGLISH ○○○○○○○○○ Storing stations in memory Manual presetting You can preset 6 stations for each band. 1 Select the band (FM1 – FM3, and AM) you want to store a station into. 2 Tune in to a station. FM station automatic presetting—SSM (Strong-station Sequential Memory) • This functions only for FM bands. 1 Select the FM band (FM1 – FM3) you want to store FM stations into. then Select “MANUAL” (or “AUTO”). 3 2 Start SSM. 4 Store the station into a preset number.
1 2 To store a station using the preset list 1 Select the band (FM1 – FM3, and AM) you want to store a station into. 2 Tune into a station. ENGLISH To tune in to a preset station • See also “Listening to the Radio” on page 17. then Select “MANUAL” (or “AUTO”). ○○○○○○○○○3 Displaying the preset list You can store and select the preset stations using the preset list on the monitor screen. To select a preset station using the preset list 4 Store the station into a preset number.
ENGLISH DVD/VCD Operations Dual Mode indicator (see page 33) SOURCE icon (see pages 14 and 33) PBC indicator (for VCD; see page 25) Current track no. (for VCD) Current title/chapter no. (for DVD) Play time information (see page 30) Audio signal format Playback mode (see page 30) Sound mode (see page 39) Surround/DSP mode (see page 36) Playback picture will be shown in the picture view window. Input signal channels are indicated a few second after detected. (See page 75.
ENGLISH CD/MP3 Operations Dual Mode indicator (see page 33) SOURCE icon (see pages 14 and 33) Current track no. (for CD) Current folder/track no. (for MP3) Play time information (see page 30) Audio signal format (only for DTS CD) Playback mode (see page 30) Sound mode (see page 39) Surround/DSP mode (see page 36) Disc text/ID3 tag information area Only for MP3 (see page 22) Playback buttons (see page 22) CD/CD Text MP3 Only for CD: See page 53. * See page 14. See page 14. See page 15. See page 39.
ENGLISH Basic Disc Operations Before performing any operations, observe the following... • For DVD playback, change the Setup Menu setting (see page 43). • If “ ” appears on the monitor, the disc cannot accept the operation you have tried. – In some cases, “ ” is not display, but operations will not be accepted. 1 Insert a disc 3 Operate the disc : Selects the folder (only for MP3). : Stops (see “Stopping play” on page 75). • VCD/CD/MP3 playback will continue endlessly until you stop it.
DVD To fast-forward or reverse the chapter or track, press ¡ or 1 on the remote controller while playing a disc. Each time you press the button, the search speed changes as follows: VCD with PBC VCD with/without PBC ENGLISH The following marks used in this manual indicate the playable discs. x2 \ x5 \ x10 \ x20 \ x60* To resume normal speed, press 3. CD MP3 All playable discs On-screen guide icons During play, the following guide icons may appear for a while on the monitor.
○ ○ ○disc○ejection ○○○○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Prohibiting ENGLISH Changing the aspect ratio You can change the aspect ratio of the playback pictures. • This function is only possible using the buttons on the main unit or on the remote controller. • Aspect ratio cannot be changed while the GUI operation mode is activated. On the remote controller On the main unit You can lock a disc in the loading slot. While playing any source...
Menu-driven playback is possible while playing back a DVD with menu-driven features or a VCD with the PlayBack Control (PBC) function. While playing a DVD: DVD discs generally have their own menus or title lists. A title list (TOP MENU) usually contains titles of movies and songs recorded. On the other hand, a menu (MENU) usually contains various information about the disc and playback selections. 1 While playing a VCD: The PBC function allows you to operate the VCD using menus.
ENGLISH When using the number buttons on the remote controller • To select number 5, press 5. • To select number 10, press 10. • To select number 23, press +10, +10, then 3. To cancel the PBC playback You can cancel the menu-driven operations (PBC function) using the remote controller. ○○○○○○○○○ Zooming in You can zoom into a particular portion of the picture. • This function is only possible using the remote controller. 1 1 Press 7 to stop playback. 2 Press number buttons to select a track.
○ ○ ○ ○ ○ ○ ○ ○ ○ Selecting ○ ○ ○audio○languages ○○○○○ While playing a chapter containing subtitles in different languages, you can select the subtitle language to display on the monitor. • You can also select the subtitle language using SETUP menu (see page 44). For DVD: While playing a chapter containing audio languages, you can select the language to listen to. • You can also select the audio language using SETUP menu (see page 44).
○○○○○○○○○ When playing VCD: ENGLISH Selecting multi-angle views While playing a disc containing multi-angle views, you can view the same scene at different angles. 1 STEREO LEFT RIGHT 2 Select a view angle you want. • STEREO: To listen to normal stereo (left/ right) playback. • LEFT: To listen to the left audio channel. • RIGHT: To listen to the right audio channel. Ex. 1/3 2/3 28 25-30_KD-AV7010[J]f.
To locate a folder by displaying the folder list • This functions only for MP3. 1 To locate a track by displaying the track list 1 ENGLISH ○○○○○○○○○ ○list○ ○ ○ ○ ○ ○ ○ ○ the Locating a folder/track using 2 2 3 Select a track you want. Current folder name or ID3 Tag (for MP3) Disc name (for CD) or CD Text 3 Select a folder you want. Current track name or ID3 Tag To next/previous page of the list To next/previous page of the list Ex. When playing MP3 29 25-30_KD-AV7010[J]f.
○ ○ ○ ○ ○ ○ ○ ○ ○ Selecting ○ ○ ○playback ○ ○modes ○○○○ ○○○○○○○○○ information ENGLISH Displaying the disc text With Auto Scroll or Scroll selected, you can display the text and scroll it on the monitor if it is long and cannot be displayed at a time. 1 You can use only one of the following playback modes at a time—Repeat Play, Random Play, and Intro Scan. • For VCD: While PBC is not in use. Repeat Play You can repeat playback. • Repeat Play can be deactivated only for DVD.
2 ENGLISH Random Play You can play back tracks at random. 1 When playing VCD/CD: INTRO SCAN TRACK 2 INTRO SCAN OFF When playing MP3: INTRO SCAN TRACK INTRO SCAN FOLDER INTRO SCAN OFF When playing VCD/CD: RANDOM PLAY DISC RANDOM PLAY OFF INTRO SCAN • TRACK: Plays the beginning of all tracks. • FOLDER: Plays the first tracks of all folders. • OFF: Cancels Intro Scan.
3 3 Enter a number, then confirm. ENGLISH Ex. When playing DVD: Enter a number, then confirm. Ex. When playing DVD: Clear the entry. Confirm Clear the entry. Confirm Ex. when playing VCD/CD: When using the number buttons on the remote controller • To select number 5, press 5. • To select number 10, press 10. • To select number 23, press +10, +10, then 3. You cannot select folder using the remote controller.
You can play back two different sources as the main source (MAIN) and subsidiary source (SUB). However, “CD-CH” (CD changer) and “SAT” (satellite) cannot be select as the main/subsidiary source at the same time even with activating Dual Mode. (See also pages 56 and 69.) You can listen to the main source through the speakers, while the subsidiary source through the monitor inserted into the cradle or the one connected to the AV OUTPUT jacks.
ENGLISH To cancel the Dual Mode, press Each time you press the icon, Dual Mode is turned on and off alternately. • When Dual Mode is turned off, the main source screen appears. . ○○○○○○○○○ Adjusting AV OUTPUT volume Select an appropriate volume level for the component connected to the AV OUTPUT jacks on the hideaway unit. • This functions without respect to the Dual Mode setting. 1 When using the remote controller: • For Dual Mode operations...
ENGLISH Surround Mode Operations 1 2 *2 *1 It does not appear for some sources. *2 It will be shaded when not available. *1 *1 3 Activate and select the surround mode or DSP mode. *2 See page 41. See page 41. See page 34. See page 39. 4 Make adjustment if you want to. • If neither surround mode nor DSP mode is activated, you cannot make adjustment. When surround mode is activated: When DSP mode is activated: 35 35-38_KD-AV7010[J]f.
○○○○○○○○○ ENGLISH Introducing surround/DSP mode Surround modes Dolby Digital Dolby Digital is a digital signal compression method, developed by Dolby Laboratories, and enables multi-channel encoding and decoding (1ch up to 5.1ch). Dolby Digital 5.1 CH Dolby Digital 5.1 CH encoding method records and digitally compresses the left front channel, right front channel, center channel, left surround channel, right surround channel, and LFE channel signals (total 6 channels, but the LFE channel is counted as 0.
○○○○○○○○○3 ○ mode ○○○○○○○○ DSP You can use surround or Digital Signal Processor (DSP) mode while playing any source. However, when playing a multi-channel encoded disc, you cannot apply DSP mode to the playback sounds. • When “AUTO SURROUND” is set to “ON” (initial setting when shipped from factory), an appropriate surround mode is automatically selected without any setting operation (see page 50).
ENGLISH 4 Adjust the selected surround or DSP mode. When DSP mode is activated: When surround mode is activated: Ex. When selecting “HALL.” 1 Select one of the DSP modes. HALL: Reproduces the spatial feeling of a large shoeboxshaped hall designed primarily for classical concerts. : Selected automatically when multichannel DTS signal is detected (while playing a DVD or a DTS CD). No further adjustment is allowed.
The following operations are only possible for the main source when using Dual Mode. 1 ENGLISH Sound Modes (iEQ) Operations *2 2 *1 It does not appear for some sources. *2 It will be shaded when not available. *1 *1 3 See page 35. See page 35. See page 41. See page 41. See page 34. 4 Select one of the preset sound (iEQ) modes (then make adjustment if you want to make your own sound mode). Select sound modes. Adjust the level of each frequency band. Display the other set of the sound modes.
○ ○your○own○ sound ○ ○modes ○○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Storing ENGLISH Selecting preset sound modes You can select a sound mode suitable to the music genre. Available sound modes: • HARD ROCK / R&B / POP / JAZZ / DANCE / COUNTRY / REGGAE / CLASSIC • USER1 / USER2 / USER3 • FLAT (To cancel the sound mode) You can adjust the sound modes and store your own adjustments in memory. 1 Repeat steps 1 to 4 on the left column to select a sound mode you want to adjust. 2 Make adjustments as you like.
Fader/Balance adjustments is only possible for the main source when using Dual Mode. 1 ENGLISH Other Sound Adjustments *2 2 *1 It does not appear for some sources. *2 It will be shaded when not available. *1 *1 3 See page 35. See page 35. See page 34. See page 39. 4 Make adjustment as you like. To adjust the input level This setting is required for each source except FM.
ENGLISH Monitor Adjustments When no playback picture from the source is displayed, you can only adjust the brightness. 1 Display SCREEN CONTROL screen. Hold Adjustable items Hold ASPECT On the main unit 2 On the remote controller : Indicates the current ambient light level. As this level changes, the monitor adjusts the brightness automatically to match it to the current ambient light level. Select an item to adjust.
You can preset the initial disc playback conditions. • No change can be made on the DVD Menu during play or when “DISC” is selected as the subsidiary (SUB) source. ENGLISH Initial Setup—DVD MENU 1 2 *1 It does not appear for some sources. *2 It will be shaded when not available. *1 *2 *1 3 See page 13. 4 Select the item you want. 5 Change the setting. • For details, see the following pages. Appears only when SIRIUS radio is connected (see also page 72). Ex. When setting “MONITOR TYPE.
ENGLISH MENU LANGUAGE Select the menu language. MONITOR TYPE Select the monitor type of your TV (connected to the AV OUTPUT jacks) to play DVD Video recorded with aspect ratio of 16:9. • For the removable monitor of this unit, set this to “16:9 AUTO.” • 16:9 NORMAL: Select when the aspect ratio of your TV is fixed to 16:9 (wide TV). • 16:9 AUTO: Select when the aspect ratio of your TV is 16:9 (wide TV), and it is equipped with aspect ratio adjustment function. AUDIO LANGUAGE Select the audio language.
ENGLISH Initial Setup—MONITOR You can preset the initial monitor conditions. 1 2 *1 It does not appear for some sources. *2 It will be shaded when not available. *1 *2 *1 3 See page 13. 4 Select the item you want. 5 Change the setting. • For details, see the following pages. Appears only when SIRIUS radio is connected (see also page 72). Ex. When setting “BEEP TONE” to “OFF” 45 43-48_KD-AV7010[J]f.
ENGLISH AUTO OPEN/CLOSE BEEP TONE • AUTO: The monitor comes out* or goes in automatically when you turn on or off the power. • OFF: Cancels this function. • ON: * If you close the monitor before turning off the power, the monitor will not come out next time you turn on the power. WIRING CHECK You can confirm the wiring connection is correctly done for particular functions. Touch tone beeps when you touch the Touch Panel icon. • OFF: Cancels this function.
ENGLISH Initial Setup—ON SCREEN You can preset the initial on-screen conditions. 1 2 *1 It does not appear for some sources. *2 It will be shaded when not available. *1 *2 *1 3 See page 13. 4 Select the item you want. Appears only when SIRIUS radio is connected (see also page 72). Language selection screen appears. 5 Change the setting. • For details, see the following pages. Ex. When setting “CLOCK” to “OFF” 47 43-48_KD-AV7010[J]f.
ENGLISH ON SCREEN LANGUAGE You can select the language for this Setup Menu and some of the messages displayed on the monitor. MESSAGE • ON: Speaker/signal indicators (see page 75) and messages are displayed. Messages are displayed on the viewing window of the monitor screen... – When selecting repeat mode, random mode, intro scan, etc. – When starting Time Search, Title Search, Chapter Search, and Track Search. GUIDE Ex. One of the messages appears when selecting repeat mode.
You can preset the initial audio-related conditions and Preferred Setting Modes (PSM). • You cannot select “AUDIO MENU” when the subsidiary source operation screen is displayed on the monitor (with Dual Mode turned on; see page 33). ENGLISH Initial Setup—AUDIO MENU/PSM 1 2 *1 It does not appear for some sources. *2 It will be shaded when not available. *1 *2 *1 3 4 5 Select the item you want. See page 13. Appears only when SIRIUS radio is connected (see also page 72).
ENGLISH AUTO SURROUND You can activate an appropriate surround mode automatically when a loaded disc is detected. • • • • • FRONT LEFT: FRONT RIGHT: ALL CENTER: REAR CENTER: For the front left seat. For the front right seat. For all front and rear seats. For the rear seats. : Displays the SPK DISTANCE screen. You can adjust the speaker distance from your listening position in meters or feet. • ON: An appropriate surround/DSP mode is automatically selected.
• MID: • MAX: Select when you want to enjoy playback with its full dynamic range (no effect applied). Select when you want to reduce the dynamic range a little. Select when you want to apply the compress effect fully (useful at a low volume level). CROSS OVER You can select the crossover frequency for the small speakers used. The signals below the preset frequency level will be sent to the subwoofer (or to the “LARGE” speakers when “SUBWOOFER” is set to “NO”).
ENGLISH AV2 INPUT SELECT You can determine the use of AV INPUT 2 jacks on the hideaway unit—select either “VIDEO” or “CAMERA.” • When the playback source is “AV2,” this setting cannot be changed. • VIDEO: The source “AV2” works for viewing the playback picture through the component connected to the AV INPUT 2 jacks. • CAMERA: Select this when connecting the rear view camera. – You can set the remaining two items (BACK GEAR/ CAMERA VIEW).
○○○○○○○○○○○○○○○○○○ Assigning titles to the sources Roman alphabets [Upper j Lower] Numbers and Symbols ENGLISH Other Main Functions Accented characters [Upper (x2) j Lower (x2)] Roman alphabet list Upper cases Lower cases Alternates between upper and lower cases. Enter other character lists. Erase all entered character. Exit. Moves the cursor position. Space (between entered characters) Backspace (Erase the last entry) Confirm the entered name.
ENGLISH You can assign titles to 30 FM/AM, 30 TV stations, and 40 CDs (both in this unit and in the CD changer). Source Maximum character number Stations: 10 CDs: 32 If the “DELETE DISC NAME” or “DELETE STATION NAME” screen appears The internal memory is full. Delete unwanted names before assignment. • You cannot assign a title to CD Text and MP3 discs. 1 Prepare the source. • For FM/AM stations: Change “FM” or “AM,” then select a station. • For a CD in this unit: Insert a CD.
You can change the monitor position and the monitor angle. • Once you change them, they are stored. The monitor opens at the stored position and angle, next time you eject the monitor. To operate the car switches behind the monitor, press and hold OPEN. The monitor change its angle to the illustrated position for about 30 seconds. To return to its previous angle within 30 seconds, press OPEN again.
ENGLISH CD Changer Operations • You cannot select CD changer and SIRIUS radio at the same time when Dual Mode is activated (see page 33). Dual Mode indicator (see page 33) SOURCE icon (see pages 14 and 33) Current disc/folder/track no. Elapsed playing time Playback mode Sound mode (see page 39) Surround/DSP mode (see page 36) Volume level appears when adjusted. Disc text/ID3 tag information area Only for MP3 MP3 CD/CD Text Only for CD: See page 53. See page 14. See page 14. See page 15. See page 39.
2 Operate the disc 1 Select “CD-CH” ENGLISH Basic CD Changer Operations : Selects the disc. then : Selects the folder (only for MP3). : Goes back to the beginning of the current track, then skips to the previous tracks if pressed repeatedly. : Skips to the following tracks if pressed repeatedly. Ex. While playing CD/CD Text* * Disc text information recorded in the CD Text can be displayed when a JVC CD Text compatible CD changer is connected. Ex.
ENGLISH Advanced CD Changer Operations ○○○○○○○○○3 Selecting disc/folders/tracks Select a disc you want. You can select the disc, (folder: only for MP3), and tracks using the buttons on the main unit. 1 DISC FOLDER TRACK 2 To next/previous page of the list Disc names will be shown once it is recognized. When using the remote controller You can directly select the disc number by pressing the corresponding number buttons (1 – 12).
○○○○○○○○○ ○○○○○○○○○ information Displaying the disc text Select a folder you want. Current track name or ID3 Tag With Auto Scroll or Scroll selected, you can display the text and scroll it on the monitor if it is long and cannot be displayed at a time. ENGLISH 3 1 To next/previous page of the list 2 (For CD) (For MP3) Shaded when no MP3 files are included. You cannot select this folder.
○○○○○○○○○ ENGLISH Selecting playback modes You can use only one of the following playback modes at a time—Repeat Play, Random Play, and Intro Scan. Repeat Play You can repeat playback. • Repeat Play cannot be deactivated. Random Play You can play back tracks at random.
1 Only for MP3 2 ○○○○○○○○○ Searching for songs You can use search functions to find your favorite tracks (for CD/MP3) and folders (for MP3). ENGLISH Intro Scan You can play back the first 15 seconds of each track sequentially. Folder/Track Search You can select a specific track (for CD/MP3) or folder (for MP3).
ENGLISH External Component Operations You can connect two video components as the playback components and an optional TV tuner unit (KV-C1000). • When you connect the video camera as a rear view camera to the AV INPUT 2 jacks to guide you to back the car, set the usage of the AV INPUT 2 jacks correctly (see page 52). • For connections, see the Installation/ Connection Manual (separate volume).
Dual Mode indicator (see page 33) SOURCE icon (see pages 14 and 33) ENGLISH TV Tuner Operations Current preset no. Channel no. Search mode Sound mode (see page 39) Surround/DSP mode (see page 36) Volume level appears when adjusted. Playback picture will be shown in the picture view window. Available only after pressing “M” (below this icon). See page 53. See page 14. See page 14. See page 15. (Not available while viewing the playback picture.) See page 39. See pages 43 – 52.
○ ○ ○ ○ ○ ○ ○ ○ ○ 3 Tune in to a TV station ENGLISH Watching TV programs • To tune in to a station using Preset Search, first store your favorite TV stations into memory (12 stations). 1 Select TV • For Auto Search, press either icon once. “Auto Search” begins. When a station is received, searching stops. • For Manual Search, press either icon repeatedly (or hold) until a station you want is selected. • For Preset Search, press either icon repeatedly until a preset number you want is selected.
1 Tune into a TV station. 1 then Select “MANUAL” (or “AUTO”). 2 2 ENGLISH To tune in to a preset station • See also “Watching TV programs” on page 64. Manual presetting Select a preset number. Store the station into a preset number. To select the rest of the preset stations then To select the rest of the preset stations Preset station information will be displayed. 65 62-66_KD-AV7010[J]f.
○○○○○○○○○ ENGLISH Displaying the preset list You can store and select the preset station using the preset list on the monitor screen. To store a station using the preset list 1 Tune into a TV station. Select “MANUAL” (or “AUTO”). To select a preset station using the preset list then 1 2 2 3 Store the station into a preset number. To next/previous page of the list • Preset numbers, channel numbers and assigned names (see page 53) of the preset TV stations are shown on the list.
SIRIUS is a satellite radio that can deliver digital-quality sound. SIRIUS has 65 music channels (all commercial-free) and 50 channels of sports/ news/entertainment programs. You can enjoy and control the SIRIUS radio digital entertainment channels from this unit by connecting the JVC SIRIUS radio (DLP: Down Link Processor—optionally purchased) to the CD changer jack on the rear. GCI (Global Control Information) update: • If channels are updated after subscription, updating starts automatically.
ENGLISH Dual Mode indicator (see page 33) SOURCE icon (see pages 14 and 33) Signal strength bar (see page 78) Current band/Preset no. Selected category Selected channel Current channel no. Search mode Sound mode (see page 39) Surround/DSP mode (see page 36) Volume level appears when adjusted. To change the search mode—CHANNEL Ô PRESET, (see page 69). See page 72. See page 69. See page 71. See page 71. See page 14. See page 14. See page 15. See page 39. See pages 43 – 52.
• You cannot select SIRIUS radio and CD changer at the same time when Dual Mode is activated (see page 33). 1 Select “SAT (SIRIUS)” ENGLISH Listening to the SIRIUS ® Radio You can tune in to all the channels of every category by selecting “ALL.” 4 Select Search Mode then CHANNEL: To select channels. PRESET: To select preset channels. 2 Select a band (SR1/SR2/SR3) 5 Select a channel for listening 3 Select a category Selecting a particular category (SPORTS, ENTERTAINMENT, etc.
○○○○○○○○○2 ENGLISH Storing user channels in memory You can preset 6 channels for each band. 1 While listening to the channel you want to store... then 2 3 Store the channel into a preset number. ○○○○○○○○○ ○○○○○○○○○ channel Listening to a user preset 1 then While listening to a channel... Preset channel information will be displayed. 2 3 Preset number appears. Ex.
2 ENGLISH To select a channel... then • User preset numbers, channel names, song names, and artist names are shown on the list. ○○○○○○○○○ ○lists○ ○ ○ ○ ○ ○ ○ ○ the To next/previous page of the list Selecting a category/channel using You can select the categories/channels using the lists on the monitor screen. 1 2 While listening to a channel... • You cannot listen to a channel with icon (it is skipped). To restore the skipped channel, see below.
3 ENGLISH 2 Change the setting or enter the setting screen. To next/previous page of the list then SIRIUS ID The SIRIUS 12-digit identification number is shown. You can neither change nor set the identification number. • SIRIUS ID will also appear on the SETUP menu if SIRIUS radio is connected. icon appears for the skipped channel (4th channel). To add (restore) the skipped channels, repeat the same procedure. (Select a skipped channel in step 2.) • icon goes off.
How to clean the monitor When removing stains or dust on the surface, turn off the monitor, then wipe with dry soft cloth. • Be careful not to scratch the surface when wiping it. • Do not use the following materials to clean the monitor: – Wet cloth – Volatile substance such as benzine and thinner – Acid detergent, alkaline detergent, and detergent composed of organic substance • When using chemically processed duster, read its precautions carefully.
ENGLISH More about This Receiver ○ ○ ○ ○ ○ ○ ○ ○ ○ Basic ○ ○Disc○Operations ○○○○○○ Operation Methods • Touch Panel screen goes off if no operations are made on it for about 30 seconds while viewing the playback picture. ○○○○○○○○○ Basic Operations Caution for DualDisc playback • The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of NonDVD side of a DualDisc on this product may not be recommended.
Speaker indicators Signal indicators SUBWFR SUBWFR – The speaker indicators—frames of “L,” “C,” “R,” “LS,” and “RS” light up, when the corresponding speakers are set to “LARGE” or “SMALL” (see page 51). Sounds come out of the speakers whose speaker indicators is lit on the display. indicator lights up when – The “SUBWOOFER” is set to “YES” (see page 51).
ENGLISH Notes on MP3 files • This unit can play back MP3 files only with the extension code <.mp3> (regardless of the letter case—upper/lower). • This unit cannot play back the files encoded in the following formats—MP3i, MP3 PRO, Layer 1, Layer 2 format. • This unit can show the names of albums, artists (performer), and tracks of ID3 Tag (Version 1.0 and 1.1). • This unit can show up to 64 characters on the monitor screen. • This unit can handle only one-byte characters.
○ ○ ○ ○ ○ ○ ○ ○ ○ Monitor ○ ○Adjustments ○○○○○○○ Adjusting AV OUTPUT volume • This adjustment does not affect the volume level of the monitor inserted into the optional cradle (KV-CR100). ○○○○○○○○○ Surround Mode Operations • Dolby Digital disc is not always encoded as multi-channel source. If it is not multichannel encoded, “Dolby Digital” cannot be selected for surround mode.
○ ○ ○ ○ ○ ○ ○ ○ ○ SIRIUS ○ ○Radio ○ ○Operations ○○○○○ ENGLISH Initial Setup—AUDIO MENU/PSM • If you change the “AMP GAIN” setting from “HIGH” to “LOW” while the volume level is set higher than “30,” the unit automatically changes the volume level to “30.” ○○○○○○○○○ Other Main Functions Assigning titles to the sources • When the CD changer is connected, you can assign titles to CDs in the CD changer. These titles can also be shown on the display if you insert the CDs in this unit.
What appears to be trouble is not always serious. Check the following points before calling a service center. General • Sound is sometimes interrupted. ] You are driving on rough roads. Stop playback while driving on rough roads. ] Disc is scratched. • Sound cannot be heard from the speakers. ] Connections are incorrect. • No sound comes out of the subwoofer (though it is activated—set to “YES”). ] If Pro Logic II is activated with the front/ center/rear speaker size all set to “LARGE,” no sound comes out.
ENGLISH Disc playback—MP3 TV tuner operations • Disc cannot be played back. ] MP3 tracks do not have the extension code—<.mp3>. ] MP3 tracks are not recorded in the format compliant with ISO 9660 Level 1, ISO 9660 Level 2, Romeo, or Joliet. • TV tuner unit does not work at all. ] Press the reset button of the TV tuner unit. • Noise is generated. ] The current track is not an MP3 file (although it has the extension code— <.mp3>). • Auto Memory does not work. ] Signals are too weak.
• “CD CHANGER IS NOT CONNECTED” appears on the monitor. ] CD changer is disconnected. Connect it again. • “NO MAGAZINE” appears on the monitor. ] Magazine is not loaded in the CD changer. • “NO FILES” appears on the monitor. ] Playable files are not recorded in the disc. • “NO DISC” appears on the monitor. ] No discs are in the magazine or the discs are inserted upside down. • “RESET 1” — “RESET 7” appears on the display of the main unit. ] The built-in microcomputer in the CD changer is malfunctioning.
ENGLISH Additional Information Preset iEQ mode The table below shows the preset frequency level settings for each iEQ mode.
Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE IK IN IS IW JI JW Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi
ENGLISH Specifications ○○○○○○○○○ Main unit AUDIO AMPLIFIER SECTION Power Output: Front and Rear: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Center: 18 W RMS × 1 Channel at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies:100 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz Level: ±10 dB Frequency Response: 40 Hz to 20 000 Hz TUNER SECTION Frequency Range: FM: 87.5 MHz to 107.
Required space for the monitor ejection 177(7) ○○○○○○○○○ Hideaway unit 143.3(5-11/16) Input Terminals: AV INPUT 1/2: Audio: 0.5 Vrms (Left/Right) Video (composite): 1 Vp-p/75 Ω Output Terminals (Level/Impedance): AV OUTPUT: Audio: 2.0 V/20 kΩ load (full scale) Video (composite): 1 Vp-p/75 Ω PRE OUT: Audio: 2.
Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR 0205MNMMDWJEIN © 2005 Victor Company of Japan, Limited Cover_KD-AV7010[J]f.
KD-AV7010 LVT1369-002A [J] Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement 0205MNMMDWJEIN EN, SP, FR © 2005 Victor Company of Japan, Limited ESPAÑOL ENGLISH FRANÇAIS This unit is designed to operate only on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
SYSTEM CONNECTIONS CONEXIONES DEL SISTEMA CONNEXIONS DU SYSTÈMES • For , , , , , the following pages. • En las siguientes páginas encontrará más información sobre , , , , , , . • Pour , , , , , , plus d’informations sont données aux pages suivantes.
INSTALLATION INSTALACIÓN INSTALLATION The following illustration shows a typical installation. However, you should make adjustments corresponding to your specific car. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. La siguiente ilustración muestra una instalación típica. Sin embargo usted deberá efectuar los ajustes correspondientes a su automóvil.
ESPAÑOL ENGLISH FRANÇAIS Conexiones eléctricas Electrical connections Before connecting... • Make sure that the antenna cord from the car is connected to the hideaway unit (see page 2). If the antenna cord is not long enough, use the extension antenna cord (supplied). • Check the wiring in the car carefully. Incorrect connection may cause serious damage to the units. The leads of the power cord and those of the connector from the car body may be different in color.
Connecting the cradle Conexión del cradle By using the cradle (KV-CR100), you can remove the monitor from the main unit and insert it into the cradle so that the persons sitting on the rear seat can view the playback picture even while the driver are driving your car. • The driver must not put on the headphones while driving. It is dangerous to shut off the outside sounds while driving.
Conexión del cambiador de CD y/o radio SIRIUS® JVC (DLP: Down Link Processor) Connexion du changeur de CD et/ou de la radio SIRIUS® JVC (DLP: Processeur de liaison descendante) CAUTION / PRECAUCION / PRECAUTION: VID AN GE R *6 VIDEO R AUDIO L FM / AM ANTENNA VIDEO R AUDIO L AV INPUT 1 TO CHANGER AV BUS CH • Before connecting the CD changer and/or JVC DLP, make sure that the unit is turned off. • Antes de conectar el cambiador de CD y/o DLP JVC, asegúrese de que el receptor esté apagado.