User Manual

36
ENGLISH
15: 45
FLAT
Connected Device Name
Bluetooth Phone
POWER]ON
~ Select “Bluetooth Phone.”
Ÿ Enter the <Bluetooth> menu.
! Establish the connection with a device,
then make a call (or settings using the
<Bluetooth> menu).
pages 34, 50, 58, and 59
When the sound is stopped or interrupted during
the use of a Bluetooth device, try the following
remedies.
Turn off, then turn on the unit.
(When the sound is not yet restored,) connect the
device again. ( “Connecting/disconnecting a
registered device” on page 35)
Using the Bluetooth cellular phone
Status of the device*
2
Signal strength/Battery remainder
Adjust the volume
*
1
When a call comes in...
The source is automatically changed to “Bluetooth
Phone.”
When <Auto Answer> is activated...
The unit answers the incoming calls automatically.
( page 59)
• When <Auto Answer> is deactivated, press any
button (except ATT or +/–) to answer the
incoming call.
page 48
Connected
device name
*
3
Name and phone number (if acquired)
To end the call or reject an incoming call
Hold any button (except ATT or +/–).
Answering a waiting call
If your cellular phone is equipped with the call
waiting function, you can put the current call on hold
and answer the waiting call.
Press any button (except ATT and +/–).
To restore the on-hold call, press any button
(except ATT and +/–) again.
When you end one call, you can connect to the
other.
Press: Display <Dial Menu>
Answers incoming call
Hold: Display <Redial> list
Turns Blue when the Bluetooth device is connected.
*
4
*
1
You can adjust the volume level for “Bluetooth Phone”
without affecting the volume level for other sources.
*
2
Appears only when the information comes from the
device.
*
3
Each time you press 5 , the registered device
name (and “NEW DEVICE” when a new device can be
registered) appear in turn.
*
4
When a cellular phone with audio function is
connected, appears.
You can adjust the microphone volume level. ( page
59)
KD-AVX33[E]_0130.indb 36KD-AVX33[E]_0130.indb 36 07.2.1 4:44:24 PM07.2.1 4:44:24 PM