Instruction Manual (Europe)

34
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Troubleshooting
Symptom Remedy
General
Sound cannot be heard. Adjust the volume to the optimum level.
Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
Source cannot be selected. Check the [SOURCESELECT] setting. (Page 5)
The unit does not work at all. Reset the unit. (Page 4)
Correct characters are not
displayed.
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
Depending on the display language you have selected
(page 6), some characters may not be displayed
correctly.
Digital Radio
DAB reception is poor. Make sure [ON] is selected for [DAB ANT POWER].
(Page 8)
“CHK ANTENNA” Check the DAB antenna. If a passive antenna (without
a booster) is used, set [DAB ANT POWER] to [OFF].
(Page 8)
“RELATED SERV FOUND” Press the volume knob to activate Soft-Link.
(Page 8)
• Press
to cancel.
Analog
Radio
Radio reception is poor.
Static noise while listening
to the radio.
Connect the antenna firmly.
Symptom Remedy
CD/USB/iPod
Disc cannot be ejected.
Press and hold
to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve
the problem, reset the unit (page 4).
Noise is generated. Skip to another track or change the disc.
“IN DISC” appears and disc
cannot be ejected.
Make sure nothing is blocking the loading slot when you
eject the disc.
“PLEASE EJECT” appears.
Press
, then insert the disc correctly.
Playback order is not as
intended.
Optical disc, the files are played in the order which they
were recorded.
USB device, the folders are played in the order of creation
(date and time). The files within each folder are played in
the order of the file name (alphabet).
Elapsed playing time is not
correct.
This depends on the recording process earlier (disc/USB).
“NOT SUPPORT” appears
and track skips.
Check whether the track is a playable format.
(Page 32)
“READING” keeps flashing. Do not use too many hierarchical levels and folders.
Reload the disc or reattach the device (USB/iPod/iPhone).
“UNSUPPORTED DEVICE”
appears.
Check whether the connected USB device is compatible
with this unit and ensure the file systems are in supported
formats. (Page 32)
Reattach the USB device.
KD_DB922BT_E_B5A-3885-00_EN_3rd Draft.indd 34KD_DB922BT_E_B5A-3885-00_EN_3rd Draft.indd 34 21/9/2021 1:00:44 AM21/9/2021 1:00:44 AM