NEDERLANDS FRANÇAIS DEUTSCH ENGLISH DVD/CD RECEIVER DVD-/CD-RECEIVER RECEPTEUR DVD/CD DVD/CD-RECEIVER KD-DV6102/KD-DV6101 For canceling the display demonstration, see page 11. Zum Abbrechen der Displaydemonstration siehe Seite 11. Pour annuler la démonstration des affichages, référez-vous à la page 11. Zie bladzijde 11 voor het annuleren van de displaydemonstratie. For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
• DO NOT install any receiver in locations where; – it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident. – it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident. – it may obstruct visibility. • DO NOT operate any receiver while manipulating the steering wheel, as this may result in a traffic accident. • The driver must not watch the monitor while driving.
ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see pages 53 – 57). • Button operations are mainly explained with the illustrations as follows: How to use the M MODE button If you press M MODE, the receiver goes into functions mode, then the number buttons and 5/∞ buttons work as different function buttons. Ex.
2 2 4 4 DVD setup menu ............................ 29 Introduction — Playable discs ............ 6 Basic operations ..................................... 32 Changing the display information ......... 33 Selecting the playback modes................ 34 How to reset your unit ........................... How to forcibly eject a disc ................... How to read this manual ........................ How to use the M MODE button........... Control panel ................................
ENGLISH Introduction — Playable discs Discs you can play Caution for DualDisc playback You can play back the following discs (12 cm and 8 cm) on this receiver: • DVD Video: Recorded in PAL color system with Region Code “2” (see below). – DVD-R/DVD-RW recorded in the DVDVideo format can also be played (see page 54). • Video CD (VCD)/audio CD • MP3/WMA: Recorded either in CD-R/ CD-RW or DVD-R/DVD-RW/DVD-ROM. – CD-R/CD-RW: Compliant with ISO 9660 Level 1, ISO 9660 Level 2, Romeo, and Joliet.
ENGLISH Control panel Parts identification Display window 1 5 (up) / ∞ (down) buttons • Function as Play / Stop buttons for DVD and VCDs.
ENGLISH Remote controller — RM-RK230 Installing the lithium coin battery (CR2025) Main elements and features MONITOR CONTROL MODE ASPECT MENU DVD / RECEIVER CONTROL ZOOM ATT +10 SOURCE –100 PRESET / TITLE BAND +100 / TITLE –10 OSD DUAL 1 VOL DISC+ 2 TOP M 4 2nd VOL 3 MENU 5 6 ENTER 7 Before using the remote controller: • Aim the remote controller directly at the remote sensor on the receiver. Make sure there is no obstacle in between.
For advanced disc operations: • /TITLE 5 / ∞ – Select the titles (for DVD) or folders (for MP3/WMA). • 4 / ¢ (reverse skip/forward skip) • 1 / ¡ (reverse search/forward search)*4 For FM/AM tuner operations: • PRESET 5 / ∞ – Changes the preset stations. • 4/¢ – Functions to search for stations. For DAB tuner operations: • PRESET 5 / ∞ – Changes the preset ensembles. • 4/¢ – Changes the ensembles if pressed briefly. – Changes the ensembles rapidly if pressed and held. w OSD button • Display the on-screen bar.
ENGLISH Getting started Basic operations ~ ⁄ Adjust the volume. Ÿ Volume level appears. You cannot select some sources if they are not ready. Volume level indicator ! For FM/AM tuner only @ Adjust the sound as you want. (See pages 36 – 38.) To drop the volume in a moment (ATT) For DAB tuner only To restore the sound, press it again. To turn off the power 10 EN08-17_KD-DV6101[E]f.
ENGLISH Canceling the display demonstrations Setting the clock 1 If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 39. 1 2 2 Set the hour and minute. 1 Select “CLOCK H” (hour), then adjust the hour. 2 Select “CLOCK M” (minute), then adjust the minute. 3 Select “24H/12H” (minute), then select “24H” (hour) or “12H” (hour). 3 3 Finish the procedure. 4 Finish the procedure.
ENGLISH Radio operations Listening to the radio To tune in to a station manually ~ In step ! on the left column... 1 Ÿ Selected band appears. 2 Select the desired station frequencies. Lights up when receiving an FM stereo broadcast with sufficient signal strength. ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. 12 EN08-17_KD-DV6101[E]3.
1 Storing stations in memory You can preset six stations for each band. ENGLISH When an FM stereo broadcast is hard to receive FM station automatic presetting— SSM (Strong-station Sequential Memory) 2 1 Lights up when monaural mode is activated. 2 Select the FM band (FM1 – FM3) you want to store into. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off.
ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. Listening to a preset station 1 1 2 2 3 Select the preset station (1 – 6) you want. 3 When using the remote controller.... 4 or Preset number flashes for a while. To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 17. 14 EN08-17_KD-DV6101[E]3.
ENGLISH FM RDS operations Searching for your favorite FM RDS programme You can tune in to a station broadcasting your favorite programme by searching for a PTY code. • To store your favorite programme, see page 16. ! Start searching for your favorite programme. ~ The last selected PTY code appears. Ÿ Select one of your favorite programme type. or Select one of the twenty-nine PTY codes.
ENGLISH What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this receiver can do the following: • Programme Type (PTY) Search (see page 15) • Temporarily switches to Traffic Announcement—TA Standby Reception. (See the right column.) • Temporarily switches to your favorite programme—PTY Standby Reception. (See pages 17 and 40.
PTY Standby Reception allows the receiver to switch temporarily to your favorite PTY programme from any source other than AM. To activate and select your favorite PTY code for PTY Standby Reception, see page 40. The PTY indicator either lights up or flashes. • If the PTY indicator lights up, PTY Standby Reception is activated. • If the PTY indicator flashes, PTY Standby Reception is not yet activated. To activate PTY Standby Reception, tune in to another station providing these signals.
ENGLISH Disc operations Playing a disc in the receiver The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program). If the current disc is an audio CD, CD Text, MP3/WMA, or VCD without PBC, all tracks will be played repeatedly until you change the source or eject the disc. • If a title list or disc menu appears while playing a DVD or VCD with PBC, see “Disc menu operations” on page 23.
Total title number • When inserting a VCD: Total playing time of the inserted disc Total track number of the inserted disc ENGLISH • When inserting a DVD disc: Elapsed playing time Elapsed playing time Current chapter number • When inserting an MP3/WMA disc: Total folder number • When inserting a CD Text/audio CD: Total playing time of the inserted disc Total track number of the inserted disc Total track number Ex.
ENGLISH Basic operations Operations Display indication and/or next operation To stop play temporarily “PAUSE” illuminates on the display. A still picture appears. A Frame by frame playback B Slow motion playback • No sound comes out during Slow Motion Playback. • When playing a VCD, Reverse Slow Motion Playback is prohibited. To resume normal play: To replay the previous scenes—One Touch Replay The playback position moves back about 10 seconds before the current position.
• For DVD: During play or pause To the following chapters/tracks. To go back to the beginning of the current chapter/track, then the previous chapters/tracks. To fast-forward or reverse the chapter/track To locate a particular title/chapter/ track directly • For DVD: During play or pause—select a chapter. During stop—select a title. • For VCD: While PBC (see page 23) is not in use. • For MP3/WMA: Select a track within the same folder.
ENGLISH DVD/VCD special functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. • You can set the initial subtitle language using the setup menu (see page 30). For VCD: You can select the audio channel to play. (This is convenient when playing a Karaoke VCD.) ST ST 1/3 ENGLISH 1/3 ENGLISH Ex.: When the disc has 3 options ST: To listen to normal stereo (left/right) playback. L: To listen to the L (left) audio channel.
Menu-driven playback is possible while playing back a DVD with menu-driven features or a VCD with the PBC (PlayBack Control). While playing a DVD 1 Canceling the PBC playback ENGLISH Disc menu operations 1 2 Select a track to start normal playback using the number buttons (see page 9). To resume the PBC function A title list or disc menu will appear on the monitor. Zoom in 2 Select the item you want on the menu. 1 Selected item starts playback.
ENGLISH On-Screen disc operations About the On-Screen Bar You can check the disc information and use some functions through the on-screen bar. • For audio CD, CD Text, and MP3/WMA disc you can also use the control screen and list screen (see pages 27 and 28). On-Screen bars DVD 2ch DVD -V TIME TITLE CHAP T02-C03 TOTAL 1:25:58 OFF VCD VCD PBC TIME TRACK TRACK 01 TIME 00:36 REPEAT INTRO RANDOM MP3/WMA TIME 00:00:36 FILE REPEAT INTRO RANDOM CD Text/audio CD CD 5.
To erase the on-screen bar ENGLISH Basic on-screen bar operations 1 Display the on-screen bar. • For DVD/VCD: • The selectable options for Repeat/Intro/ Randam plays: (twice) Repeat play OFF • For other discs: DVD: OFF 2ch DVD -V TIME TITLE CHAP CHAP TITLE T02-C03 TOTAL 1:25:58 OFF REPEAT 2 Select an item. Repeat play VCD (while PBC is not in use): (Canceled) REPEAT 3 Make a selection. MP3/WMA: REPEAT TRACK REPEAT FOLDER (Canceled) • If pop-up menu appears...
ENGLISH Intro play INTRO VCD (while PBC is not in use): (Canceled) INTRO To search for a particular point by playing time 1 Select . 2 Enter the elapsed playing time of the current title or of the disc. MP3/WMA: INTRO TRACK INTRO FOLDER (Canceled) CD Text/audio CD: INTRO TRACK RANDOM (Canceled) Random play VCD (while PBC is not in use): RANDOM (Canceled) Ex.: • To enter 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.
You can search for and play the desired items through the control screen. • The control screen automatically appears on the monitor when you insert a disc. To select a folder or track 1 Select “Folder” column or “Track” column on the control screen. ENGLISH Basic control screen operations 2 Select a folder or track. MP3/WMA control screen REPEAT TRACK TIME 00:00:14 FOLDER : 2 / 3 01 Music 02 Music 03 Music Track Information Album Weather Artist Robert M.
ENGLISH List screen operations You can display the folder list/track list before starting play. On this list, you can confirm the contents and start playing a disc. Folder/track list screens While stop... 1 Display the folder list. Each time you press the button, the list screen comes on and goes off. 2 Select a folder on the list.
DVD setup menu 4 ENGLISH You can store the initial disc playback status. • While playing, no change can be made on the setup menu. AUDIO Basic setting procedure DIGITAL AUDIO OUTPUT STREAM/PCM DOWN MIX STEREO DOLBY SURROUND ONSTEREO D. RANGE COMPRESSION While stop... 5 Select an option. 1 LANGUAGE MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH 2 AUDIO DIGITAL AUDIO OUTPUT STREAM/PCM DOWN MIX STEREO DOLBY SURROUND ONSTEREO D.
ENGLISH LANGUAGE menu Item Contents MENU LANGUAGE Select the initial disc menu language. AUDIO LANGUAGE Select the initial audio language. SUBTITLE Select the initial subtitle language or erase the subtitle (OFF). ON SCREEN LANGUAGE Select the language for the Setup menu and some indications shown on the monitor. • For the LANGUAGE settings, see also the language codes list on page 52.
Item Contents DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal on the rear. For details, see page 57. • PCM ONLY : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or connecting to a recording device. • DOLBY DIGITAL/PCM : Select this when connecting an amplifier or a decoder compatible with Dolby Digital.
ENGLISH Other disc operations In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player. Basic operations To stop playback To go to the next or previous folders To next folders. To previous folders. To locate a particular title/chapter/ folder/track directly To start playback again To eject a disc • For DVD: During play or pause—select a chapter. During stop—select a title. • For VCD: While PBC (see page 23) is not in use.
Prohibiting disc ejection ENGLISH To go to a chapter/track quickly You can lock a disc in the loading slot. • For DVD: During play or pause. • For VCD: While PBC (see page 23) is not in use. • For MP3/WMA: Select a track within the same folder. 1 To cancel the prohibition, repeat the same procedure. 2 First time you press 5 or ∞ button, the chapter/track skips to the nearest higher or lower chapter/track with a number of multiple ten (ex. 10th, 20th, 30th).
ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Mode Plays repeatedly CHP RPT*1 • For DVD: During play or pause. • For VCD: While PBC (see page 23) is not in use. : The current chapter. • RPT lights up. TIT RPT*1 : The current title. • and RPT light up. TRK RPT*2 : The current track. • RPT lights up. FLDR RPT*3 : All tracks of the current folder. • and RPT light up.
Listening with headphones By connecting headphones to the 2nd AUDIO OUT plug on the rear, you can listen to the playback sound through the DVD/CD player while listening to another source through the speakers. You can activate Dual Zone while listening to any source. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. 3 Operate the DVD/CD player using the remote controller by referring to the monitor screen.
ENGLISH Sound adjustments Selecting preset sound modes You can select a preset sound mode suitable to the music genre. Indication pattern for each sound mode: USER ROCK JAZZ CLASSIC HIP HOP POPS ~ Ÿ Ex.: When “ROCK” is selected 36 EN32-39_KD-DV6101[E]3.
ENGLISH 4 Select a frequency to adjust. Storing your own sound adjustments You can adjust the sound modes and store your own adjustments in memory. 1 5 Adjust the level (–05 to +05). 2 6 Repeat steps 4 and 5 to adjust the other frequency bands. 3 Enter the sound adjustment mode. 7 Store the adjustments in the respective mode. Sound modes (preset frequency level settings) The list below shows the preset frequency level settings for each sound mode.
ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. Indication To do: R06 (Rear only) to F06 (Front only) BAL (balance) Adjust the left and right speaker balance. L06 (Left only) to R06 (Right only) LOUD (loudness) Boost low and high frequencies to produce a wellbalanced sound at low volume level. LOUD ON J LOUD OFF SUB. W*2 (subwoofer) Adjust the subwoofer output level. 00 (min.) to 08 (max.) VOL.
General settings — PSM ENGLISH 3 Adjust the PSM item selected. Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 2 Select a PSM item. 5 Finish the procedure. Ex.
ENGLISH Indications Selectable settings, [reference page] AF-REG Alternative frequency/ regionalization reception When the received signals from the current station become weak... AF : [Initial]; Switches to another station (the programme may differ from the one currently received), [17]. • The AF indicator lights up. AF REG : Switches to another station broadcasting the same programme. • The AF and REG indicators light up. OFF : Cancels (not selectable when “DAB AF” is set to “AF ON”).
Selectable settings, [reference page] TEL Telephone muting MUTING 1/MUTING 2: Select either one which mutes the sounds while using the cellular phone. OFF : [Initial]; Cancels. SCROLL*3 Scroll ONCE : [Initial]; Scrolls the disc information once. AUTO : Repeats scrolling (5-second intervals in between). OFF : Cancels. • Even if “SCROLL” is set to “OFF,” you can scroll the display by pressing D DISP for more than one second.
ENGLISH Other main functions Assigning titles to the sources 2 Move to the next (or previous) character position. You can assign titles to CDs (both in this receiver and in the CD changer). Maximum number of characters Sources DISC/CD-CH Up to 8 characters (up to 30 discs) 3 Repeat steps 1 and 2 until you finish entering the title. 4 Finish the procedure. • You cannot assign a title to a DVD, VCD, CD Text, or an MP3/WMA disc. 1 Select the source. • For a CD in this receiver: Insert a CD.
When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Attaching the control panel ENGLISH Detaching the control panel Detaching the control panel Before detaching the control panel, be sure to turn off the power. 43 EN40-47_KD-DV6101[E]3.
ENGLISH CD changer operations Playing discs in the CD changer About the CD changer ~ It is recommended to use the JVC MP3compatible CD changer with your receiver. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). However, they are not compatible with MP3 discs, so you cannot play back MP3 discs. • You cannot use the KD-MK series CD changers with this receiver.
To fast-forward or reverse the track ENGLISH • When the current disc is an MP3 disc: Current disc number Fast-forwards. Folder name* Reverses. To go to the next or previous tracks Current folder number To the following tracks. Disc information appears automatically (see page 46). Elapsed playing time Current track number To the beginning of the current track, then the previous tracks.
ENGLISH 2 While playing an MP3 disc • When “TAG DISP” is set to “TAG ON” (see page 41) First time you press 5 or ∞ button, the track skips to the nearest higher or lower track with a track number of multiple ten (ex. 10th, 20th, 30th). Then each time you press the button, you can skip 10 tracks. • After the last track, the first track will be selected and vice versa. 3 *2 If an MP3 file does not have ID3 tags, folder name and file name appear. In this case, the TAG indicator will not light up.
ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Mode Plays repeatedly TRK RPT : The current track. • RPT lights up. FLDR RPT* : All tracks of the current folder. • and RPT light up. DISC RPT : All tracks of the inserted discs. • and RPT light up. RPT OFF : Cancels. Ex.: When “TRK RPT” is selected while playing an MP3 disc Random play Ex.
ENGLISH External component operations Playing an external component You can connect an external component to the LINE IN plug on the rear and AUX (auxiliary) input jack on the control panel. • For connection, see Installation/Connection Manual (separate volume). Ÿ ! Turn on the connected component and start playing the source. Adjust the volume. ~ ⁄ LINE IN: For selecting the external component connected to the LINE IN plug. AUX IN: For selecting the external component connected to the AUX input jack.
ENGLISH DAB tuner operations Listening to the DAB tuner ~ 2 Select the desired ensemble frequencies. Ÿ ! What is DAB system? Start searching for an ensemble. When an ensemble is received, searching stops. To stop searching, press the same button again. ⁄ Select a service (either primary or secondary) to listen to. To tune in to an ensemble manually In step ! above... 1 DAB can deliver CD quality sound without any annoying interference and signal distortion.
ENGLISH Storing DAB services in memory You can preset six DAB services (primary) for each band. 1 Perform steps ~ to ⁄ on page 49, to select a service you want. 2 Select the preset number (1 – 6) you want to store into. Preset number flashes for a while. Tracing the same programme— Alternative Reception You can keep listening to the same programme by activating the Alternative Reception.
How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.
ENGLISH Language codes Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croa
Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Selecting the sources • When no disc is loaded in the receiver, “DISC” cannot be selected. • Without connecting to the CD changer or DAB tuner, “CD-CH” or “DAB” cannot be selected. Turning off the power • If you turn off the power while listening to a disc, disc play will start automatically, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search...
ENGLISH Playing a DVD-R/DVD-RW or CD-R/ CD-RW • Use only “finalized” discs. • This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files. • Only for CD-R/CD-RW: This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing.
Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “DISC” for the playback source (without activating Dual Zone), disc play starts from where it has been stopped previously. ENGLISH • This receiver can recognize the total of 1100 files, 250 folders (maximum of 999 files per folder). • This receiver can play back the files recorded in VBR (variable bit rate).
ENGLISH General settings—PSM • If you change the “AMP GAIN” setting from “HIGH PWR” to “LOW PWR” while the volume level is set higher than “VOL 30,” the receiver automatically changes the volume level to “VOL 30.” Other main functions • If you try to assign a title to a 31st disc, “NAMEFULL” flashes on the display. Delete unwanted titles before assignment. • Titles assigned to discs in the CD changer can also be shown if you playback the disc on the receiver.
• Through the analog terminals (Speaker out/LINE OUT/2nd AUDIO OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (AUDIO—DOWN MIX: see page 31.) ENGLISH About sounds reproduced through the rear terminals • Through DIGITAL OUT (optical): Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this terminal. (For more details, see below.
ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Disc playback FM/AM General • Sound cannot be heard from the speakers. • The receiver does not work at all. Causes Remedies The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. The built-in microcomputer may have functioned incorrectly due to noise, etc.
Remedies You are driving on rough roads. Stop playback while driving on rough roads. Disc is scratched. Change the disc. Connections are incorrect. Check the cords and connections. • No playback picture (DVD, VCD) appears on the monitor. Parking brake wire is not connected properly. See Installation/Connection Manual. • No picture appears on the monitor at all. The video cord is not connected correctly. Connect the video cord correctly. An incorrect input has been selected on the TV or monitor.
ENGLISH MP3/WMA playback Symptoms Causes Remedies • Noise is generated. The track played back is not an MP3/WMA file (although it has the extension code <.mp3> or <.wma>). Skip to another track or change the disc. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • A longer readout time is required. Readout time varies due to the complexity of the folder/ file configuration. Do not use too many hierarchies and folders.
Specifications Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil Hebt u PROBLEMEN met de bediening? Stel het apparaat terug Zie de pagina met de paragraaf Het apparaat terugstellen EN, GE, FR, NL © 2005 Victor Company of Japan, Lim
KD-DV6102/KD-DV6101 GET0280-005C [E] Installation/Connection Manual Einbau/Anschlußanleitung Manuel d’installation/raccordement Handleiding voor installatie/aansluiting ENGLISH 0805DTSMDTJEIN EN, GE, FR, NL DEUTSCH FRANÇAIS NEDERLANDS This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers.
INSTALLATION (IN-DASH MOUNTING) EINBAU (IM ARMATURENBRETT) INSTALLATION (MONTAGE INSTALLATIE (INBOUW IN DANS LE TABLEAU DE BORD) HET DASHBOARD) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this receiver correctly, have it installed by a qualified technician.
ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the receiver. • Be sure to ground this receiver to the car’s chassis again after installation.
ENGLISH A DEUTSCH FRANÇAIS For some VW/Audi or Opel (Vauxhall) automobile / Bei bestimmten VW-/Audi- order Opel(Vauxhall-) Fahrzeugen / Pour certaine voiture VW/Audi ou Opel (Vauxhall) / Voor bepaalde VW/Audi en Opel (Vauxhall) auto’s If your car is equipped with the ISO connector / Wenn Ihr Fahrzeug mit dem ISOSteckverbinder ausgestattet ist / Si votre voiture est équippée d’un connecteur ISO / Indien uw auto een ISO-aansluiting heeft • Connect the ISO connectors as illustrated.
C Connecting the parking brake wire / Anschluss des Handbremsenkabels / Connexion du cordon de frein de stationnement / De parkeerremdraad aansluiten When installing the monitor in a location where it can be seen by the driver Connect the parking brake wire to the parking brake system built in the car. Lorsqu’on installe le moniteur à un emplacement où il peut être vu du conducteur Connectez le fil de frein de stationnement au système de frein de stationnement.
F Connecting the external amplifiers / Anschließen der externen Verstärker / Connexion d’amplificateurs extérieurs / Verbinden van externe versterkers You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this receiver. • For amplifier only: – Disconnect the speakers from this receiver, connect them to the amplifier. Leave the speaker leads of this receiver unused.