Instructions

ENGLISH
30
Category Menu items Selectable settings, [reference page]
COLOR
COLOR 01
— COLOR 29,
USER
Select one of the preset or user color for display and button (except EQ/
/0) illumination.
(See also page 32 for USER color setting.)
MENU
COLOR
MENU COLOR
Menu color
• OFF:
• ON:
Cancels.
Changes the display and button (except EQ/
/0)
illumination during menu, list search and playback mode
operations.
RING COLOR
RING COLOR *
7
Ring color
• OFF:
• ON:
Cancels.
When a call comes in, the display will flash in blue.
• The display will change to the original color when you
answer the call or the incoming call stops.
When the unit receive a text message, the display only
illuminate in blue.
AUDIO
FADER*
8
Fader
FADER R12
— FADER F12:
Adjust the front and rear speaker output balance.
[Initial: 00]
BALANCE *
9
Balance
BALANCE L12
— BALANCE R12:
Adjust the left and right speaker output balance.
[Initial: 00]
VOL ADJUST
Volume adjust
VOL ADJ –10
— VOL ADJ +10:
[Initial: VOL ADJ 00]
Preset the volume adjustment level of each source (except
FM), compared to the FM volume level. The volume level
will automatically increase or decrease when you change
the source.
• Before making an adjustment, select the source you want
to adjust.
• “VOL ADJ FIX” appears on the display if “FM”, “BT PHONE“,
or “BT AUDIO“ is selected as the source.
SUB.W FREQ
Subwoofer cutoff
frequency
• LOW:
• MID:
• HIGH:
Frequencies lower than 72 Hz are sent to the subwoofer.
Frequencies lower than 111 Hz are sent to the subwoofer.
Frequencies lower than 157 Hz are sent to the subwoofer.
*
7
Displayed only when Bluetooth adapter, KS-BTA200 is connected.
*
8
If you are using a two-speaker system, set the fader level to “00.”
*
9
This adjustment will not aff ect the subwoofer output.
KD-HDR50[J]8.indb 30KD-HDR50[J]8.indb 30 08.11.28 10:22:44 AM08.11.28 10:22:44 AM