Instruction Manual
(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
1
2
3
Repeat step 2 if necessary.
To return to the previous menu, press .
To exit from the menu, press DISP or MENU.
Menu item
Selectable setting (Initial: [XX])
DEMO
For settings, ' page 4.
CLOCK
CLOCK SET
For settings, ' page 4.
CLOCK ADJ *1 [AUTO]: The built-in clock is automatically adjusted using the clock data
provided via the Satellite Radio channel.
OFF: Cancels.
TIME ZONE *1*2 [EASTERN]/ATLANTIC/NEWFOUND/ALASKA/PACIFIC/MOUNTAIN/
CENTRAL: Selects your residential area from one of the time zones for clock
adjustment.
DST *1*2 [DST ON]: Activates daylight savings time if your residential area is subject
to DST.
DST OFF: Cancels.
COLOR
For settings, ' page 21.
COLOR SETUP
DIMMER
DIMMER SET Selects the display and button illumination adjusted in the <BRIGHTNESS>/
<COLOR SETUP> setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *3
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.
BRIGHTNESS DAY[31]/NIGHT[15]: Brightness settings for the display and button
illumination for day and night.
BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31.
DISPLAY
SCROLL *4 [ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.
TAG DISPLAY [ON]: Shows the TAG information while playing MP3/WMA/WAV tracks.
OFF: Cancels.
EQ SETTING
For settings, ' page 22.
AUDIO
FADER *5*6
R06 — F06[00]: Adjusts the front and rear speaker output balance.
BALANCE *6
L06 — R06[00]: Adjusts the left and right speaker output balance.
*1 Displayed only when SIRIUS Satellite Radio or XM Satellite Radio is connected.
*2 Displayed only when <CLOCK ADJ> is set to <AUTO>.
*3 The illumination control lead connection is required. (See “Installation/Connection Manual”.)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <DIMMER AUTO>.
*4 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*5 If you are using a two-speaker system, set the fader level to “00”.
*6 This adjustment will not affect the subwoofer output.
Menu operations
Menu operations
ENGLISHޓ|
23
2011/12/17ޓ14:6:9KD-AHD75_J_EN