KD-LH1150/KD-LH1100 RECEPTOR CON CD KD-LH1150/KD-LH1100 ESPAÑOL RECEPTEUR CD KD-LH1150/KD-LH1100 FRANÇAIS ENGLISH CD RECEIVER SOUND ATT U R SOURCE F D VOL VOL • This unit is equipped with the display demonstration. To cancel it, see page 8. • Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la página 8. • Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler, référez-vous à la page 8.
ENGLISH INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 LOCATION OF THE BUTTONS ............ 4 Control panel ............................................. Illumination Navigation for easy operations ............................................... Remote controller ...............................
LOCATION OF THE BUTTONS ENGLISH Control panel 1 2 9 3 p 4 q 5 w e r 6 78 ty u 1 2 3 4 5 6 7 8 9 p q w e r t y u (standby/on/attenuator) button EQ (equalizer) button Control dial Display window FM/AM button 5 (up) button 0 (eject) button 4 /¢ buttons (control panel release) button SEL (select) button D (DISP: display) button Number buttons M (MODE) button Remote sensor CD/CD-CH (CD changer) button ∞ (down) button Trim illumination Illumination Navigation for easy operations: If you press M (
Remote controller SOUND ATT U R SOURCE F D VOL ENGLISH 3 • Selects the preset stations while listening to the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. • While playing an MP3 disc on an MP3compatible CD changer; – Skips to the previous disc if pressed briefly. – Skips to the previous folder if pressed and held. Note: While playing a CD on a CD changer, this always skips to the previous disc.
ENGLISH Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. 3. Return the battery holder. Insert again the battery holder by pushing it until you hear a clicking sound. (back side) Remote sensor • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
ENGLISH BASIC OPERATIONS 1 3 2 Turning on the power 1 Select the source. To operate the tuner (FM or AM), see pages 10 – 14. To play a CD, see pages 15 – 19. To operate the CD changer, see pages 33 – 39. To operate the external component (LINE IN), see page 40. 3 Adjust the sound as you want. (See pages 20 – 22.) Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
ENGLISH Canceling the display demonstration When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. • It is recommended to cancel the demonstration before you use the unit for the first time. 3 Select “Off.” All Demo Int Demo Off 4 Finish the setting.
ENGLISH 4 Setting the clock 1 Select “Clock Min” (minute). 2 Adjust the minute. You can also set the clock system to either 24 hours or 12 hours. 1 1 2 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 24 and 25.) The next-step-operation buttons start flashing. 2 Set the minute. 5 Set the clock system. 1 Select “24H/12H.” 2 Select “24Hours” or “12Hours.
ENGLISH RADIO OPERATIONS Listening to the radio You can use either automatic searching or manual searching to tune in to a particular station. Searching a station automatically: Auto search 1 To stop searching before a station is received, press the same button you have pressed for searching. Searching a station manually: Manual search 1 Select the band (FM1 – 3, AM). Each time you press the button, the band changes as follows: Select the band (FM1 – 3, AM).
Tune in to a station you want while “Manual Search” is flashing. To tune in to stations of higher frequencies To tune in to stations of lower frequencies • If you release your finger from the button, the manual mode will automatically turns off after 5 seconds. • If you hold down the button, the frequency keeps changing (in 200 kHz intervals for FM and 10 kHz for AM) until you release the button. When an FM stereo broadcast is hard to receive: 1 Press M (MODE) while listening to an FM stereo broadcast.
ENGLISH 2 2 Start automatic preset. 1 Press M (MODE). “Mode” appears on the display. The next-step-operation buttons start flashing. Tune in to a station (in this example, of 88.3 MHz). To tune in to stations of higher frequencies 2 Press and hold number button 5, while “Mode” is still on the display. To tune in to stations of lower frequencies 3 Press and hold the number button (in this example, 1) for more than 2 seconds. “–SSM–” appears, then disappears when automatic preset is over.
You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 11 and 12. Selecting a preset station directly 1 Selecting a preset station using the preset station list If you forget what stations are stored in what preset numbers, you can check the preset station list, then select your desired station.
ENGLISH Changing the display pattern By pressing D (DISP), you can change the information shown on the display. Each time you press the button, the display patterns change as follows: Small animation display 1 Large animation display Current sound mode (iEQ) (see page 21) Clock time Small animation display 2 Clock time display If a name has been assigned to a station it will be shown instead of “NO NAME.” 14 EN10-14KD-LH1150_1100[J]f.
ENGLISH CD OPERATIONS Playing a CD 1 The display changes to show the following: Open the control panel. Total track number and total playing time of the inserted disc Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD/CD-CH turns on the unit and starts playback automatically. 2 Insert a CD into the loading slot. The unit turns on, draws the CD and starts playback automatically. 3 Close the control panel by hand.
ENGLISH To stop play and eject the CD To go to a particular track directly Press 0. CD play stops and the control panel flips down. The CD automatically ejects from the loading slot. The source changes to the previously selected source. • If you change the source, CD play also stops (without ejecting the CD). Next time you select “CD” as the source, CD play starts from where playback has been stopped previously. Press the number button corresponding to the track number to start its playback.
• Ex. 1: To select track number 32 while playing track number 6 To play back tracks repeatedly (Track Repeat Play) You can play back the current track repeatedly. 1 Press M (MODE) while playing a CD. Track 6 (Three times) \ 10 \ 20 \ 30 (Twice) \ 31 \ 32 • Ex. 2 : To select track number 8 while playing track number 36 Track 36 (Three times) \ 30 \ 20 \ 10 “Mode” appears on the display. The next-step-operation buttons start flashing.
ENGLISH To play back only intros (Track Intro Scan) You can play back the first 15 seconds of each track sequentially. 1 Press M (MODE) while playing a CD. “Mode” appears on the display. The next-step-operation buttons start flashing. Prohibiting CD ejection You can prohibit CD ejection and can lock a CD in the loading slot. While pressing CD/CD-CH, press and hold for more than 2 seconds. 2 Press number button 1, while “Mode” is still on the display.
By pressing D (DISP), you can change the information shown on the display. Each time you press the button, the display patterns change as follows: Large animation display Small animation display 1 Current sound mode (iEQ) (see page 21) Small animation display 2 ENGLISH Changing the display pattern Clock time Small animation display 3 Clock time display Small animation display 4 Notes: • When the disc title/performer is shown, the (disc) indicator lights up.
ENGLISH SOUND ADJUSTMENTS Adjusting the sound You can adjust the sound characteristics to your preference. • “Vol Adj” setting is required for each source except FM. Before starting “Vol Adj,” select an appropriate source for which you want to make an adjustment. 1 Select the item you want to adjust. The next-step-operation buttons start flashing.
To increase the level 2 Press the number button to select the sound mode you want. • This unit has two sound mode selection screens. To move to the other screen, press 5 (up) or ∞ (down). ENGLISH • To adjust the input level of each source —Vol Adj: To decrease the level Selecting preset sound modes (iEQ: intelligent equalizer) Press 5 (up) or ∞ (down). You can select a preset sound mode (iEQ: intelligent equalizer) suitable to the music genre.
ENGLISH Storing your own sound adjustments 2) Press 5 (up) or ∞ (down) to adjust the You can adjust the sound modes to your preference and store your own adjustments in memory (User 1, User 2, and User 3). • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 3) Repeat steps 1) and 2) to adjust the 1 level of the selected band within the range of –05 to +05. other frequency bands. 5 Store the adjustment you made.
Meter 1: The audio level meter fluctuates vertically. You can show the level meters on the display while playing any source. This unit is equipped with three level meter patterns. • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 1 Meter 2: Press EQ (equalizer) twice. Last selected level meter appears on the display. The next-step-operation buttons start flashing.
ENGLISH OTHER MAIN FUNCTIONS Changing the general settings (PSM) 3 You can change the items listed on the table below and on page 25 by using the PSM (Preferred Setting Mode) control. • The PSM items are grouped into six categories—MOVIE, CLOCK, DISP (display), TUNER, AUDIO, and COLOR. 1 • By pressing ¢ or 4 repeatedly, you can also move to other categories. 4 Basic Procedure Select the PSM item you want to adjust. (See pages 24 and 25.) Adjust the PSM item selected.
Scroll Selectable values/items Once Scroll mode Auto Once 26 Auto 28 Any time – Any time 6PM – 7AM 28 1 – 10 5 26 Auto 26 Off Dimmer Dimmer mode Auto Off DISP (display) Time Set* From– To*1 Dimmer time setting Contrast Contrast LCD Type Display type 1 Positive On Negative AUDIO TUNER Auto Font Type Font type Tag Tag display IF Filter Intermediate frequency filter Beep Key-touch tone Ext Input*2 All SRC COLOR User Factory-preset See settings page 1 2 1 26 On
ENGLISH To set the movie demonstration—Graphics When shipped from the factory, the movie has been activated. • All Demo: If no operation is done for about 20 seconds, the movie demonstration starts automatically. • Int Demo: If no operation is done for about 20 seconds, the movie demonstration and playback source indication appears alternately on the display. • Off: Cancels the movie demonstration. To adjust the display contrast level —Contrast You can adjust the display contrast level among 1 to 10.
This function takes effect only when JVC MP3-compatible CD changer is connected. An MP3 file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded. There are two versions–ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). Only ID3v1 can be shown. • On: Turns on the ID3 tag display while playing MP3 files. • If an MP3 file does not have ID3 tags, folder name and file name appear.
ENGLISH Selecting the dimmer mode 4 Set the dimmer mode as you like. You can dim the display at night automatically or as you set the timer. When shipped from the factory, Auto Dimmer mode is activated. Note: Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming. In this case, select any other than “Auto.” 1 • Auto: Activates Auto Dimmer. When you turn on the car head lights, the display automatically dims.
3 You can set the display color using the PSM control. You can select your favorite color for each source (or for all sources). You can also create your own colors, and set them as the display color. When shipped from the factory, “All SRC” (all source) is selected. Select the source—All SRC, CD, Changer (Line), FM, or AM—that you want to set the display color for.
ENGLISH Creating your own color—User 4 You can create your own colors—“Day” and “Night,” and select them as the display color for any desired source. • Day: Can be used as your user color during the day time (while the headlights are turned off). • Night: Can be used as your user color during the night time (while the headlights are turned on.) 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See pages 24 and 25.
3 You can assign names to station frequencies, CDs (both in this unit and in the CD changer), and the external component. After assigning a name, it will appears on the display when you select the source. Select the character set you want while the first character position is flashing.
ENGLISH Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Attaching the control panel 1 Insert the right side of the control panel into the groove on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel.
ENGLISH CD CHANGER OPERATIONS We recommend that you use the JVC MP3compatible CD changer with your unit. Playing discs By using this CD changer, you can play back your original CD-Rs (Recordable) and CD-RWs (Rewritable) recorded either in audio CD format or in MP3 format. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). However, they are not compatible with MP3 discs, so you cannot play back MP3 discs. • You cannot use the KD-MK series CD changers with this unit.
ENGLISH • When the current disc is a CD: Playback starts from the first track of the current disc. To fast-forward or reverse the track/file Press and hold ¢ , during play, to fast-forward the track/file. Selected disc number Press and hold 4 the track/file. , during play, to reverse To go to the next or previous tracks/files Current track and elapsed playing time Notes: • When you press CD/CD-CH, the power automatically comes on. You do not have to press to turn on the power.
How to go to the desired track/file quickly • Ex. 1: To select track/file number 32 while playing track/file number 6 To go to a track/file quickly ENGLISH This operation is only possible when using JVC MP3-compatible CD changer (CH-X1500). 1 Press M (MODE) while playing a disc. “Mode” appears on the display. The next-step-operation buttons start flashing. Track/File 6 (Three times) (Twice) \ 10 \ 20 \ 30 \ 31 \ 32 • Ex.
ENGLISH Selecting a disc/folder/track using the name lists While playing an MP3 disc, you can also show the folder list(s) and file list(s) on the display, then select a folder or file. To select a disc using the disc lists 1 While playing an MP3 disc, press and hold If you forget what discs are loaded in the CD changer, you can show the disc title list and select a disc in the list shown on the display. • The display can show only six disc names at a time.
To play back tracks/files at random (Random Play) Random Folder* 1 Press M (MODE) during play. “Mode” appears on the display. The next-step-operation buttons start flashing. 2 Press number button 3 repeatedly while “Mode” is still on the display. Each time you press the button, random play mode changes as follows: Active indicator Mode Random Disc Random All indicator lights up. Plays at random All files of the current folder, then files of the next folder and so on. indicator lights up.
ENGLISH 2 Press number button 1 repeatedly while “Mode” is still on the display. Each time you press the button, intro scan mode changes as follows: For MP3 discs: Ex.: When you select “Repeat Track” Note: MP3 indicator also lights up if the current playing disc is an MP3 disc. Mode Repeat Track Repeat Folder* Repeat Disc Active indicator indicator lights up. indicator lights up. indicator lights up.
While playing back an MP3 file, you can change the MP3 disc information shown on the display. Note: When playing a CD or a CD Text, you can also change the disc information, see page 19 for details.
ENGLISH EXTERNAL COMPONENT OPERATIONS Playing an external component Select the external component correctly, follow the procedure below. You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied). 1 Select the external component (Line In). Line In* CD Preparation: For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).
ADDITIONAL INFORMATION ENGLISH Sound modes (preset frequency level settings) The list below shows the preset frequency level settings for each sound mode. • You can adjust the preset sound modes (except User 1/2/3) temporarily. However, your temporary adjustments will be reset when you select another sound mode. Sound Mode Preset equalizing values 60 Hz 150 Hz 400 Hz 1 kHz 2.
What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes FM/AM Disc Playback Remedies The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • This unit does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Press the reset button on the panel holder after detaching the control panel.
Remedies Insert discs into the magazine. Discs are inserted upside down. Insert discs correctly. Discs are unplayable. Insert playable discs. • “No Magazine” flashes on the display. No magazine is loaded in the CD changer. Insert the magazine. • “No File” flashes on the display. The current disc does not contain any MP3 files. Insert a disc that contains MP3 files. • MP3 disc is skipped or cannot be played back. MP3 files do not have the extension code—mp3 in their file names.
ENGLISH MAINTENANCE Handling discs When playing a CD-R or CD-RW This unit has been designed to reproduce CDs, CD-Rs (Recordable), CD-RWs (Rewritable), and CD Texts. • This unit is not compatible with MP3 discs, but can operate a JVC MP3-compatible CD changer. How to handle discs When removing a disc Center holder from its case, press down the center holder of the case and lift the disc out, holding it by the edges. • Always hold the disc by the edges. Do not touch its recording surface.
AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.
http://www.jvcmobile.com Visit us on-line for Technical Support & Customer Satisfaction Survey. US RESIDENTS ONLY Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! V EN, SP, FR J C © 2003 VICTOR COMPANY OF JAPAN, LIMITED Cover001AKD-LH1150_1100[J]f.
KD-LH3150/KD-LH3100 KD-LH1150/KD-LH1100 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement GET0147-002A [J/C] V J ENGLISH ESPAÑOL 0203KKSMDTJEIN EN, SP, FR FRANÇAIS • This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. • Esta unidad está diseñada para funcionar con 12 V de CC, con sistemas eléctricos de masa NEGATIVA. • Cet appareil est conçu pour fonctionner sur des sources de courant continu de 12 V à masse NEGATIVE.
• When using the optional stay • Cuando emplea un soporte opcional • Lors de l’utilisation du hauban en option Fire wall Tabique a prueba de incendios Cloison Washer Arandela Rondelle • When installing the unit without using the sleeve • Instalación de la unidad sin utilizar la cubierta • Lors de l’installation de l’appareil sans utiliser de manchon In a Toyota for example, first remove the car radio and install the unit in its place.
ENGLISH ESPAÑOL FRANÇAIS Typical Connections / Conexiones típicas / Raccordements typiques 1 Connect the colored leads of the power cord to the car battery, speakers and automatic antenna (if any) in the following sequence. 1 1 2 3 4 Black: ground Yellow: to car battery (constant 12 V) Red: to an accessory terminal Blue with white stripe: to remote lead of other equipment or automatic antenna if any (200 mA max.
Connecting the leads / Conexión de los conductores / Raccordement des fils Twist the core wires when connecting. Retuerza los alambres de alma para conectarlos. Torsader les âmes des fils en les raccordant. Solder the core wires to connect them securely. Suelde los alambres de alma para conectarlos con firmeza. Souder les âmes desfils pour les raccorder entre eux de façon sûre. CAUTION / PRECAUCION / PRECAUTION: • To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.