ENGLISH LVT1008-001A [E/EX] DEUTSCH CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER NEDERLANDS FRANÇAIS KD-LX555R S SSM SEL S TP/PTY DISP BAND MODE T D M KD-LX555R ATT EQ INT MONO 7 8 9 RPT 10 OFF RND 11 12 SOURCE This unit is equipped with the display demonstration. To cancel it, see page 8. Dieses Gerät ist mit einer Demonstrationsfunktion für das Display ausgestattet. Auf Seite 8 wird beschrieben, wie Sie diese Demonstrationsfunktion deaktivieren können.
ENGLISH LVT1008-001A [E/EX] Position And Reproduction Of Labels Bottom panel of the main unit CAUTION: Invisible laser ADVARSEL: Usynlig laserradiation when open and stråling ved åbning, når interlock failedor defeated. sikkerhedsafbrydere er ude AVOID DIRECT EXPOSURE af funktion. Undgåudsæt(d) TO BEAM. (e) telse for stråling. VARNING: Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen.
LVT1008-001A [E/EX] ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .............................. 2 SOUND ADJUSTMENTS .................. 29 LOCATION OF THE BUTTONS ........... 4 Control panel ............................................ • How to use the number buttons ............ Remote controller .................
LVT1008-001A [E/EX] ENGLISH LOCATION OF THE BUTTONS Control panel 1 2 3 4 5 SSM KD-LX555R SEL TP/PTY DISP BAND MODE S T D M ATT 6 7 8 9 EQ 1 SOURCE 7 q p MONO 2 8 w 3 9 INT RPT RND 4 10 5 11 6 12 er t y OFF u *The control panel slides out when you press ON CLOSE. *When you press OFF 0, the display panel moves down and the CD loading slot appears.
LVT1008-001A [E/EX] Remote controller RM-RK60 S ENGLISH 3 • Selects the preset stations while listening to the radio (or the DAB tuner). Each time you press the button, the preset station (ensemble) number increases, and the selected station (ensemble) is tuned in. • Skips to the first file of the previous folder while listening to an MP3 disc. Each time you press the button, you can move to the previous folder and start playing the first file.
ENGLISH LVT1008-001A [E/EX] Preparing the remote controller 3. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. Return the battery holder. Insert again the battery holder pushing it until you hear a clicking sound. (back side) Remote sensor KD-LX555R INT 9 RPT 10 OFF RND 11 12 • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
LVT1008-001A [E/EX] ENGLISH BASIC OPERATIONS SSM SEL S DISP BAND MODE T D M 3 1 Turning on the power 1 TP/PTY KD-LX555R ATT EQ INT MONO 7 8 9 RPT 10 OFF RND 11 12 SOURCE 2 3 Adjust the volume. To increase the volume Turn on the power. The display illuminates and the control panel and control dial come out. To decrease the volume Volume level appears. 2 Select the source.
ENGLISH LVT1008-001A [E/EX] Canceling the demonstration When shipped from the factory, demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. • It is recommended to cancel the demonstration before you use the unit for the first time. To cancel the demonstration, follow the procedure below. 1 Press and hold SEL (S) for more than 2 seconds so that one of the PSM items appears on the display. (See pages 31 and 32.
LVT1008-001A [E/EX] ENGLISH RADIO BASIC OPERATIONS Press ON CLOSE to turn on the power. SSM SEL TP/PTY DISP BAND MODE T D M S KD-LX555R ATT S INT MONO 7 8 9 RPT 10 OFF RND 11 12 SOURCE SSM SEL EQ TP/PTY DISP BAND MODE T D M KD-LX555R ATT EQ INT MONO 8 7 9 2 Listening to the radio Select the band. ATT 1 Press SOURCE ATT to select FM or AM as the source. BAND MODE 2 If necessary, press and hold BAND MODE (M) to select the FM band number (FM1, FM2 or FM3).
ENGLISH LVT1008-001A [E/EX] 2 3 Press and hold ¢ or 4 until “M (manual)” starts flashing on the display. Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strongstation Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM Tune in to a station you want while “M” is flashing. Press ¢ to tune in to stations of higher frequencies.
Tuning in to a preset station Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 10 and 11. 1 1 Select the band (in this example, FM1).
LVT1008-001A [E/EX] ENGLISH RDS OPERATIONS What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc. Another advantage of RDS function is called “Enhanced Other Networks.
1 Press and hold SEL (S) for more than 2 seconds so that one of the PSM items appears on the display. (See pages 31 and 32.) SEL S Using TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from the current source (another FM station or CD and other connected components.) • TA Standby Reception will not work if you are listening to an AM station.
ENGLISH LVT1008-001A [E/EX] Using PTY Standby Reception PTY Standby Reception allows the unit to switch temporarily to your favourite programme (PTY: Programme Type) from the current source (another FM station or CD). • PTY Standby Reception will not work if you are listening to an AM station. You can select your favourite programme type for PTY Standby Reception. When shipped from the factory, PTY Standby Reception is turned off. (“OFF” is selected for PTY Standby Reception.
Searching your favorite programme 2 You can search any one of the PTY codes. In addition, you can store your 6 favorite programme types in the number buttons. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favorite programme types, see below. To search your favorite programme type, see page 16. 1 POP M 2 ROCK M 3 EASY M 4 CLASSICS 5 AFFAIRS 6 VARIED Select one of the twenty-nine PTY codes. (See page 18.
ENGLISH LVT1008-001A [E/EX] To search your favorite programme type 1 Press and hold TP/PTY (T) for more than 2 seconds while listening to an FM station. TP/PTY Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons T The last selected PTY code appears. 2 Select one of the PTY codes. EQ 1 INT MONO 7 2 8 3 9 10 RPT RND 5 11 6 12 OR Usually when you press the number button, the preset station is tuned in.
Changing the display mode while listening to an FM station You can change the initial indication on the display to either station name (PS NAME) or to station frequency (FREQUENCY), while listening to an FM RDS station. • See also “Changing the general settings (PSM)” on page 31. Setting the TA volume level You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level.
ENGLISH LVT1008-001A [E/EX] PTY codes NEWS: AFFAIRS: INFO: SPORT: EDUCATE: DRAMA: CULTURE: SCIENCE: VARIED: POP M: ROCK M: EASY M: LIGHT M: CLASSICS: OTHER M: WEATHER: FINANCE: News Topical programmes expanding on current news or affairs Programmes which impart advice on a wide variety of topics Sport events Educational programmes Radio plays Programmes on national or regional culture Programmes on natural science and technology Other programmes like comedies or ceremonies Pop music Rock music Easy-list
LVT1008-001A [E/EX] ENGLISH CD OPERATIONS Press ON CLOSE to turn on the power. SSM SEL TP/PTY DISP BAND MODE T D M S KD-LX555R ATT S INT MONO 7 SSM SEL EQ 8 9 RPT 10 TP/PTY DISP BAND MODE T D M 12 KD-LX555R ATT EQ INT MONO 7 8 9 RPT 10 RND 11 OFF 12 SOURCE Playing a CD 1 OFF RND 11 SOURCE When you insert a disc, the display changes to show the following: Open the loading slot.
ENGLISH LVT1008-001A [E/EX] Locating a track or a particular portion on a CD To fast-forward or reverse the track Selecting CD playback modes To play back tracks at random (Disc Random Play) You can play back all tracks on the CD at random. Press and hold ¢, while playing a CD, to fast-forward the track. Press and hold 4 , while playing a CD, to reverse the track.
To play back only intros (Track Intro Scan) You can play back the first 15 seconds of each track sequentially. BAND MODE 1 Press BAND MODE (M) while playing a CD. “MODE” appears on the display. M INT 10 2 Press INT (intro scan), while “MODE” is still on the display. Each time you press the button, track intro scan mode turns on and off alternately. Playing a CD Text In a CD Text, some information about the disc (its disc title, performer and track title) is recorded.
LVT1008-001A [E/EX] ENGLISH MP3 INTRODUCTION What is MP3? Precautions when recording MP3 files on a CD-R or CD-RW MP3 is an abbreviation of Motion Picture Experts Group (or MPEG) Audio Layer 3. MP3 is simply a file format with a data compression ratio of 1:10 (128 Kbps*). That means, by using MP3 format, one CD-R or CD-RW can contain 10 times as much data volume as a regular CD can. * Bit rate is the average number of bits that one second of audio data will consume.
LVT1008-001A [E/EX] 01 02 04 03 05 10 5 6 09 11 20 06 7 Level 6 01 08 1 2 3 4 Level 4 Level 3 Level 2 ROOT Level 5 Hierarchy ROOT ENGLISH Level 1 MP3 folder/file configuration 8 9 12 21 07 22 13 14 15 16 17 23 24 18 19 : Root : Folders : MP3 files Note: There is no limit on the number of the hierarchy levels (nested folders). However, it is recommended to limit the numbers of hierarchy levels up to 8 for stable operations.
LVT1008-001A [E/EX] ENGLISH MP3 OPERATIONS Press ON CLOSE to turn on the power. SSM SEL TP/PTY DISP BAND MODE T D M S KD-LX555R ATT S INT MONO 7 8 9 RPT 10 OFF RND 11 12 SOURCE SSM SEL EQ TP/PTY DISP BAND MODE T D M KD-LX555R ATT EQ Refer also to “CD OPERATIONS” on pages 19 to 21. Playing an MP3 disc 1 INT MONO 7 8 9 RPT 10 OFF RND 11 12 SOURCE When you insert a disc, the display changes to show the following: CD–in indicator Open the control panel.
To stop play and eject the disc Press OFF 0 briefly. Disc play stops, the display panel moves down, then the disc automatically ejects from the loading slot. To move up the display panel, press ¢ . If no button is pressed, the display or 4 panel will move up in about 5 minutes. CAUTION: NEVER insert your finger between the display panel and the unit, as it may get caught in the unit.
ENGLISH LVT1008-001A [E/EX] Locating a file or a particular portion on an MP3 disc For “MP3 playback/search order” see page 23. To fast-forward or reverse the file Press and hold ¢ while playing an MP3 disc, to fast-forward the file. Press and hold 4 while playing an MP3 disc, to reverse the file. To go to a particular folder directly IMPORTANT: To directly select the folders using the number button(s), it is required that folders are assigned 2 digit numbers at the beginning of their folder names.
To skip to the next or previous folder BAND MODE M 1 Press BAND MODE (M) to enter the functions mode while playing an MP3 disc. “MODE” appears on the display. ¢ or 4 , while “MODE” is still on the display. 2 Press Selecting MP3 playback modes To play back files at random (Folder Random/Disc Random Play) You can play back all files of the current folder or all files on the MP3 disc at random. 1 Press BAND MODE (M) to enter BAND MODE the functions mode while playing an MP3 disc.
ENGLISH LVT1008-001A [E/EX] To play back files repeatedly (Track Repeat/Folder Repeat Play) To play back only intros (Track Intro Scan/Folder Intro Scan) You can play back the current file or all the files in the current folder repeatedly. You can play back the first 15 seconds of each file sequentially. 1 Press BAND MODE (M) to enter BAND MODE the functions mode while playing an MP3 disc. “MODE” appears on the display.
LVT1008-001A [E/EX] Selecting preset sound modes (iEQ: i-equalizer) Adjusting the sound You can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. SEL Each time you press the button, the adjustable items change as follows: S BAL FAD 1 Press BAND MODE (M). BAND MODE M VOLUME S.BASS (volume) (super bass) To do: Range FAD* Adjust the front and rear speaker balance. BAL Adjust the left L06 (Left only) and right speaker | balance. R06 (Right only) S.
ENGLISH LVT1008-001A [E/EX] * By pressing ¢ or 4 can directly move as follows: Storing your own sound adjustments You can adjust the sound modes to your preference and store your own adjustments in memory (USER 1, USER 2 and USER 3). • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 1 LOW FREQ. MID FREQ. HIGH FREQ. 5 Adjust the selected sound element. • Refer to the table below for adjusting the selected sound element.
LVT1008-001A [E/EX] 3 Changing the general settings (PSM) Adjust the PSM item selected above. You can change the items listed on the next page by using the PSM (Preferred Setting Mode) control. Basic Procedure 1 4 Press and hold SEL (S) for more than 2 seconds so that one of the PSM items appears on the display. (See below.) 5 ENGLISH OTHER MAIN FUNCTIONS Repeat steps 2 and 3 to adjust the other PSM items if necessary. Finish the setting.
ENGLISH LVT1008-001A [E/EX] Preferred Setting Mode (PSM) items Indications TA VOL Traffic announcement volume P-SEARCH Programme search DAB AF*2 Alternative frequency search DAB VOL*2 DAB volume adjustment LEVEL Level display DIMMER Dimmer mode Selectable values Factory-preset settings See page TA VOL 00 – TA VOL 50 TA VOL 20 17 SEARCH OFF SEARCH ON SEARCH OFF AF OFF AF ON AF ON 46 DAB VOL –12 to 12 DAB VOL 00 46 5 types (See below.
To select the dimmer mode—DIMMER When you turn on the car head lights, the display automatically dims (Auto Dimmer). When shipped from the factory, Auto Dimmer mode is activated. • AUTO: • OFF: • ON: Activates Auto Dimmer. Cancels Auto Dimmer. Always dims the display. To adjust the display contrast level —CONTRAST You can adjust the display contrast level among “1” (dark) to “10” (bright). When shipped from the factory, the display contrast level is set at level “5.
ENGLISH LVT1008-001A [E/EX] To make the front panel look flat (hiding the control panel)—FLAT PANEL When operating the receiver using the remote control, you can hide the control panel to make the front panel look flat. When shipped from the factory, “FLAT OFF” is selected. • FLAT ON: • FLAT OFF: The control panel will not come out when you turn on the unit. To use the control panel, press 4 so that the control panel comes out.
Assigning names to the sources 3 Select the character set you want while “ ” is flashing. DISP D You can assign names to CDs and the external component. After assigning a name, it will appear on the display when you select the source.
ENGLISH LVT1008-001A [E/EX] 3 Using the security lock Select a letter. You can prohibit the unauthorized use of this unit by the others. To use the security lock, you need to set the password first. Once you set the password, the unit will ask you to enter the password when you turn on the unit for the first time after re-installation (or after recovering the car battery exhaustion). CAUTION: Be careful not to forget the password you have entered; otherwise, you cannot use this unit.
When Security Lock works? To change the password Once you register the password, “ ” appears on the display, and the unit will ask you to enter the password in the following cases: • When you turn on the unit for the first time after re-installing the unit. • When you turn on the unit for the first time after replacing the car battery. If you want to change the password after you have registered it, follow the procedure below. 1 Press SEL (S) and ¢ at the same time for more than 2 seconds.
LVT1008-001A [E/EX] ENGLISH CD CHANGER OPERATIONS Press ON CLOSE to turn on the power. SSM SEL TP/PTY S T DISP KD-LX555R BAND MODE D M ATT EQ S 8 9 RPT 10 OFF RND 11 12 SOURCE SSM SEL INT MONO 7 TP/PTY DISP BAND MODE T D M KD-LX555R ATT EQ INT MONO 7 9 8 RPT 10 RND 11 We recommend that you use the JVC MP3 compatible CD changer with your unit.
• When the current disc is an MP3 disc: Playback starts from the first folder of the current disc once file check is completed. To go to a particular disc directly Press the number button corresponding to the disc number to start its playback (while the CD changer is playing). EQ 1 7 INT MONO 2 8 3 9 10 RPT RND 5 11 6 12 ENGLISH LVT1008-001A [E/EX] Current disc number • To select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly.
ENGLISH LVT1008-001A [E/EX] To skip to the next or previous folder (Only for MP3 discs) 1 Press BAND MODE (M) to enter BAND MODE the functions mode while playing an MP3 disc. “MODE” appears on the display. M Selecting the playback modes To play back tracks/files at random (Folder Random/Disc Random/Magazine Random Play) 1 Press BAND MODE (M) to enter BAND MODE M the functions mode during play. “MODE” appears on the display. ¢ or 4 , while “MODE” is still on the display.
To play back tracks/files repeatedly (Track Repeat/Folder Repeat/Disc Repeat Play) 1 Press BAND MODE (M) to enter BAND MODE M the functions mode during play. “MODE” appears on the display. 2 Press RPT (repeat), while “MODE” RPT is still on the display. Each time you press the button, the repeat play mode changes as follows: 5 11 For MP3 discs: To play back only intros (Track Intro Scan/Folder Intro Scan/Disc Intro Scan) 1 Press BAND MODE (M) to enter BAND MODE M the functions mode during play.
LVT1008-001A [E/EX] ENGLISH EXTERNAL COMPONENT OPERATIONS SSM SEL TP/PTY DISP BAND MODE T D M S EQ S INT MONO 7 8 9 RPT 10 OFF RND 11 12 SOURCE SSM SEL Press ON CLOSE to turn on the power. KD-LX555R ATT TP/PTY DISP BAND MODE T D M KD-LX555R ATT EQ 8 Playing an external component 2 You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).
LVT1008-001A [E/EX] ENGLISH DAB TUNER OPERATIONS Press ON CLOSE to turn on the power. SSM SEL TP/PTY DISP BAND MODE T D M S KD-LX555R ATT S INT MONO 7 8 9 RPT 10 OFF RND 11 12 SOURCE SSM SEL EQ TP/PTY DISP BAND MODE T D M KD-LX555R ATT EQ INT MONO 9 8 7 RPT 10 RND 11 OFF 12 SOURCE We recommend that you use DAB (Digital Audio Broadcasting) tuner KT-DB1000 or KT-DB1500 with your unit. If you have another DAB tuner, consult your JVC IN-CAR ENTERTAINMENT dealer.
ENGLISH LVT1008-001A [E/EX] 4 Select a service you want to listen to. BAND MODE M 1 Press BAND MODE (M). “MODE” appears on the display. 2 Press ¢ or 4 to select a service you want, while “MODE” is still on the display. Storing DAB services in memory You can preset up to 6 DAB services in each DAB band (DAB1, DAB2 and DAB3) manually. 1 Select the DAB tuner (DAB1 – 3).
4 Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds. EQ 1 7 Tuning in to a preset DAB service You can easily tune in to a preset DAB service. Remember that you must store services first. If you have not stored them yet, see page 44. 1 ENGLISH LVT1008-001A [E/EX] Select the DAB tuner (DAB1 – 3). ATT SOURCE 1 Press SOURCE ATT to select DAB tuner as the source. “PI” flashes for a few seconds.
ENGLISH LVT1008-001A [E/EX] What you can do more with DAB Tracing the same program automatically (Alternative Reception) You can keep listening to the same program. • While receiving a DAB service: When driving in an area where a service cannot be received, this unit automatically tunes in another ensemble or FM RDS station, broadcasting the same program.
LVT1008-001A [E/EX] What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Disc Playback FM/AM General • Sound cannot be heard from the speakers. Remedies The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. Security lock is in use. Enter the password. (See page 37.) • When “ERR 20” to “ERR 40” appears on the display.
Symptoms Causes • Disc sound is sometimes interrupted. Disc Playback ENGLISH LVT1008-001A [E/EX] You are driving on rough roads. Stop playback while driving on rough roads. Disc is scratched. Change the disc. Connections are incorrect. Check the cords and connections. No disc in the loading slot. Insert a disc into the loading slot. Disc is inserted incorrectly. Insert the disc correctly. No MP3 files are recorded on the disc. Change the disc.
LVT1008-001A [E/EX] Causes ENGLISH • “NO DISC” appears on the display. Remedies No disc is in the magazine. Insert discs into the magazine. Discs are inserted upside down. Insert discs correctly. • “NO MAG” appears on the display. No magazine is loaded in the CD changer. Insert the magazine. • “RESET 8” appears on the display. This unit is not connected to the CD changer correctly. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
LVT1008-001A [E/EX] ENGLISH MAINTENANCE Handling discs When playing a CD-R or CD-RW This unit has been designed to reproduce CDs, CD-Rs (Recordable), CD-RWs (Rewritable), and CD Texts. • This unit is also compatible with MP3 discs. How to handle discs When removing a disc from its Center holder case, press down the center holder of the case and lift the disc out, holding it by the edges. • Always hold the disc by the edges. Do not touch its recording surface.
LVT1008-001A [E/EX] AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
LVT1008-001A [E/EX] Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil Hebt u PROBLEMEN met de bediening? Stel het apparaat terug Zie de pagina met de paragraaf Het apparaat terugstellen VICTOR COMPANY OF JAPAN, LIMI
LVT1008-004A [E/EX] KD-LX555R Installation/Connection Manual Einbau/Anschlußanleitung Manuel d’installation/raccordement Handleiding voor installatie/aansluiting V J PIM176800 [E/EX] ENGLISH DEUTSCH C 1202MNMMDTTKR EN, GE, FR, NL NEDERLANDS FRANÇAIS • This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. • Dieses Gerät ist für einen Betrieb in elektrischen Anlagen mit 12 V Gleichstrom und (–) Erdung ausgelegt.
LVT1008-004A [E/EX] • When installing the unit without using the sleeve / Beim Einbau des Geräts ohne Halterung / Lors de l’installation de l’appareil scans utiliser de manchon / Wanneer u het apparaat zonder huis installeert • When using the optional stay / Beim Verwenden der Anker-Option / Lors de l’utilisation du hauban en option / Wanneer u de steun gebruikt (facultatief) Lock nut Sicherungsmutter Ecrou d’arrêt Contra-moer Dashboard Armaturenbrett Tableau de bord Dashboard Screw (option) Schraube (
LVT1008-004A [E/EX] ENGLISH DEUTSCH FRANÇAIS A If your car is equipped with the ISO connecter Wenn Ihr Auto mit ISO-Steckern ausgestattet ist Si votre voiture est équippée d’un connecteur ISO Indien uw auto is uitgerust met de ISO-connector • • • • Connect the ISO connectors as illustrated. Die ISO-Stecker wie abgebildet anschließen. Connectez les connecteurs ISO comme montré sur l’illustration. Sluit de ISO-connectoren aan zoals op het voorbeeld is aangegeven.
LVT1008-004A [E/EX] PRECAUTIONS on power supply and speaker connections: • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged. • Connect the black lead (ground), yellow lead (to car battery, constant 12 V), and red lead (to an accessory terminal) correctly. • BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car. – If the speaker wiring in your car is as illustrated in Fig. 1 and Fig.
LVT1019-001A [E/EX] Canceling the demonstration / Deaktivieren der Demonstration / Annulation de la démonstration / De demonstratie annuleren / Cancelación de la demostración / Per annullare la dimostrazione 1 SEL S ENGLISH 3 4 NEDERLANDS FRANÇAIS Die Demonstration ist werkseitig aktiviert und wird automatisch gestartet, wenn das Gerät 20 Sekunden lang nicht genutzt wird. • Wir empfehlen, die Demonstration zu deaktivieren, bevor Sie das Gerät zum ersten Mal verwenden.
LVT1020-001A [E/EX] CAUTION / ACHTUNG / ATTENTION / LET OP / ATENCION / ATTENZIONE ENGLISH DEUTSCH To install this unit, attach the trim plate to the unit first, then fit the unit into the mounting sleeve by pressing the four corners of the trim plate. DO NOT press the panel (shaded in the illustration); otherwise the panel may become unable to open or close. NEDERLANDS FRANÇAIS Um dieses Gerät zu installieren, bringen Sie zunächst den Zierrahmen am Gerät an.