Instruction Manual

ManualsBrandsJVC ManualsCD PlayerKD-MX3000

Table Of Contents

COVER
INFORMATION
CONTENTS 1
CONTENTS 2
When this unit malfunctions or does not operate:
BASIC OPERATIONS
- To drop the volume in a moment
- To turn off the power
RADIO BASIC OPERATIONS
- Listening to the radio
  - To tune in a particular frequency without searching:
  - Scanning broadcast stations
- Storing stations in memory
  - Automatic preset: SSM
  - Manual preset
- Tuning into a preset station
  - To change the display information while receiving a station
- Selecting FM reception sound
  - To restore the stereo effect,
CD OPERATIONS
- Playing a CD
  - To stop play and eject the CD
  - To show the assigned name while the elapsed playing time
- Locating a track or a particular portion on a CD
- Selecting CD playback modes
- Prohibiting CD ejection
MD OPERATIONS
- Playing an MD
  - To stop play and eject the MD
  - To change the display while playing an MD
- Locating a track or a particular portion on an MD
- Selecting MD playback modes
- Prohibiting MD ejection
SOUND ADJUSTMENTS
- Selecting preset sound control modes
Adjusting the sound
Storing your own sound adjustments
- To reset to the factory settings
OTHER MAIN FUNCTIONS
- Setting the clock
  - To check the current clock time while the unit is turned off,
- Changing the general settings (PSM)
- Controlling the volume automatically (Audio Cruise Mode)
- Assigning names to the sources
  - To erase the input characters
  - Available characters
- Detaching the control panel
  - How to detach the control panel
  - How to attach the control panel
REMOTE OPERATIONS
- Installing the batteries
- Using the remote controller
CD CHANGER OPERATIONS
- Playing CDs
- Selecting CD playback modes
- Playing the CD Text
EXTERNAL COMPONENT OPERATIONS
MAINTENANCE
- Handling Discs
TROUBLESHOOTING
SPECIFICATIONS
BACK COVER

ENGLISH

Track number of the currently playing track

To play back only intros (Intro Scan)

Each time you press INT (Intro) briefly while playing a CD, CD intro scan

mode turns on and off alternately.

When the intro scan mode is turned on, “INTRO” appears on the display

for 5 seconds and the track number flashes. The first 15 seconds of each

track are played sequentially.

INT

You can prohibit the CD ejection and can “lock” a CD in the loading slot.

While pressing MD/CD, press and hold

for more than 2 seconds. “NO EJECT” flashes

on the display for about 5 seconds, and the CD is “locked” and cannot be ejected.

To cancel the prohibition and “unlock” the CD, press and hold again for more

than 2 seconds, while pressing MD/CD. “EJECT OK” appears on the display, and the CD is

“unlocked.”

MD/CD

Prohibiting CD ejection

EN 10-13 KD-MX3000 [J]/F 98.10.19, 6:36 PM13