Instruction Manual

ManualsBrandsJVC ManualsCD PlayerKD-MX3000

Table Of Contents

COVER
INFORMATION
CONTENTS 1
CONTENTS 2
When this unit malfunctions or does not operate:
BASIC OPERATIONS
- To drop the volume in a moment
- To turn off the power
RADIO BASIC OPERATIONS
- Listening to the radio
  - To tune in a particular frequency without searching:
  - Scanning broadcast stations
- Storing stations in memory
  - Automatic preset: SSM
  - Manual preset
- Tuning into a preset station
  - To change the display information while receiving a station
- Selecting FM reception sound
  - To restore the stereo effect,
CD OPERATIONS
- Playing a CD
  - To stop play and eject the CD
  - To show the assigned name while the elapsed playing time
- Locating a track or a particular portion on a CD
- Selecting CD playback modes
- Prohibiting CD ejection
MD OPERATIONS
- Playing an MD
  - To stop play and eject the MD
  - To change the display while playing an MD
- Locating a track or a particular portion on an MD
- Selecting MD playback modes
- Prohibiting MD ejection
SOUND ADJUSTMENTS
- Selecting preset sound control modes
Adjusting the sound
Storing your own sound adjustments
- To reset to the factory settings
OTHER MAIN FUNCTIONS
- Setting the clock
  - To check the current clock time while the unit is turned off,
- Changing the general settings (PSM)
- Controlling the volume automatically (Audio Cruise Mode)
- Assigning names to the sources
  - To erase the input characters
  - Available characters
- Detaching the control panel
  - How to detach the control panel
  - How to attach the control panel
REMOTE OPERATIONS
- Installing the batteries
- Using the remote controller
CD CHANGER OPERATIONS
- Playing CDs
- Selecting CD playback modes
- Playing the CD Text
EXTERNAL COMPONENT OPERATIONS
MAINTENANCE
- Handling Discs
TROUBLESHOOTING
SPECIFICATIONS
BACK COVER

ENGLISH

Adjusting the sound

You can adjust the sound characteristics to your preference.

Select the item you want to adjust.

Indication To do: Range

BASS Adjust the bass –06 (min.) — +06 (max.)

TREBLE Adjust the treble –06 (min.) — +06 (max.)

FADER* Adjust the front and rear speaker R06 (rear only) — F06 (front only)

balance

BALANCE Adjust the left and right speaker L06 (left only) — R06 (right only)

balance

LOUDNESS

Boost low and high frequencies to

produce a well-balanced sound at low

volume level.

VOLUME Adjust the volume 00 (min.) — 50 (max.)

ON — OFF

Note:

* If you are using a two-speaker system, set the fader level to “00” (center).

Adjust the level.

Note:

Normally the control dial is used to set the volume. So you do not have

to select “VOLUME” to adjust the volume level.

SEL

BASS TREBLE FADER

BALANCE

VOLUME LOUDNESS

EN 18-20 KD-MX3000 [J]/F 98.10.19, 6:52 PM19