Operation Manual
ENGLISH
11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
1 Press and hold .
2 Press to select an item (see the following table), then press
.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
DISPLAY
DIMMER
Dim the illumination.
OFF
:Dimmer is turned off. Brightness changes to
[DAY]
setting.
ON
:Dimmer is turned on. Brightness changes to
[NIGHT]
setting.
(
12, [BRIGHTNESS])
DIMMER TIME
:Set the dimmer on and off time.
1
Press to adjust the
[ON]
time, then press .
2
Press to adjust the
[OFF]
time, then press .
(Default:
[ON]
:
18:00
;
[OFF]
:
6:00
)
DIMMER AUTO
:Dimmer turns on and off automatically when you turn off or on
the car headlights.
*
1
*
1
The illumination control wire connection is required.
( 17)
DISPLAY SETTINGS
Connection via speaker leads
For connections without using an external amplifier. However, with
this settings you can also enjoy the subwoofer output.
( 17)
Setting on
[SPK/PRE OUT]
Audio signal through rear speaker lead
L (left) R (right)
REAR/REAR
Rear speakers output Rear speakers output
REAR/SUB.W
(default) Rear speakers output Rear speakers output
SUB.W/SUB.W
Subwoofer output (Mute)
If
[SUB.W/SUB.W]
is selected:
–
[FRQ 120HZ]
is selected in
[SUBWOOFER LPF]
and
[FRQ THROUGH]
is not
available.
–
[POSITION R01]
is selected in
[FADER]
and selectable range is
[POSITION R06]
to
[POSITION 00]
.
Symbolic button
JS_JVC_KD_R681_E_EN_5.indd 11JS_JVC_KD_R681_E_EN_5.indd 11 8/1/2016 9:01:21 AM8/1/2016 9:01:21 AM