Operation Manual

ENGLISH
4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL DEMO”
“PRESS ENTER”
1 Press .
[YES] is selected for the initial setup.
2 Press again.
“DEMO OFF” appears.
Set the clock and date
1
Press and hold .
2 Press to select [CLOCK] , then press .
To adjust the clock
3 Press to select [CLOCK ADJUST] , then press .
4 Press to make the settings, then press .
Hour
Minute
5 Press to select [CLOCK FORMAT] , then press .
6 Press to select [12H] or [24H] , then press .
To set the date
7 Press to select [DATE SET] , then press .
8 Press to make the settings, then press .
Day
Month Year
9 Press to exit.
To return to the previous setting item, press .
1
2
Set the basic settings
1
Press and hold .
2 Press to select an item (see the following table), then press
.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press .
Default: XX
SYSTEM
KEY BEEP
ON :Activates the keypress tone.; OFF :Deactivates.
SOURCE SELECT
AM SRC
*
ON :Enables AM in source selection.; OFF :Disables. ( 7)
BUILT-IN AUX
*
ON :Enables AUX in source selection.; OFF :Disables. ( 8)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx
YES :Starts upgrading the firmware.; NO :Cancels (upgrading is not activated).
For details on how to update the firmware, see: <http://www.jvc.net/cs/car/>.
CLOCK
TIME SYNC
ON :The clock time is automatically set using the Clock Time (CT) data in FM
Radio Data System signal.;
OFF :Cancels.
CLOCK DISPLAY ON :The clock time is shown on the display even when the unit is turned off.;
OFF :Cancels.
ENGLISH
Select the display language for menu and music information if applicable.
By default,
ENGLISH is selected.
РУССКИЙ
ESPANOL
*
Not displayed when the corresponding source is selected.
3
JS_JVC_KD_R681_E_EN_5.indd 4JS_JVC_KD_R681_E_EN_5.indd 4 8/1/2016 9:01:16 AM8/1/2016 9:01:16 AM