Owner's Manual
Table Of Contents
18
ENGLISH
To On the faceplate On the remote control
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Press
or the
volume knob.
( Not available )
Reject another incoming
call
Press and hold
or the volume knob.
( Not available )
While having two active calls...
End current call and
activate held call
Press and hold
or the volume knob.
Press and hold
.
Swap between the
current call and held call
Press
.
( Not available )
Adjust the phone volume
*
1
[00]
to
[35]
(Default:
[15]
)
Turn the volume knob
during a call.
Press
*
2
or
during a call.
Switch between hands-free
and private talk modes
*
3
Press during
a call.
( Not available )
*
1
This adjustment will not affect the volume of the other sources.
*
2
Press and hold to continuously increase the volume to 15.
*
3
Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone....
1 Press and hold .
2 Turn the volume knob to select an item
(
see the following table
)
, then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN LEVEL –10
to
LEVEL +10
(
LEVEL –04
):The sensitivity of the
microphone increases as the number increased.
NR LEVEL LEVEL –05
to
LEVEL +05
(
LEVEL 00
):Adjust the noise
reduction level until the least noise is being heard during a phone
conversation.
ECHO CANCEL LEVEL –05
to
LEVEL +05
(
LEVEL 00
):Adjust the echo
cancellation delay time until the least echo is being heard during a
phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
To return to the previous setting item, press
.
Default:
XX
SETTINGS
AUTO ANSWER
01 SEC
to
30 SEC
:The unit answers incoming call automatically in
the selected time (in seconds).;
OFF
:Cancels.
RING COLOR KD-R995BTS
/
KD-R990BTS
/
KD-R895BTS
/
KD-RD99BTS
/
KD-R99MBS
:
COLOR 01
to
COLOR 49
(
COLOR 08
): Selects the light color for the
buttons as notification when there is an incoming call and during
a call.;
OFF
:Cancels.
RING ILLUMI KD-R792BT
/
KD-R790BT
/
KD-RD79BT
:
BLINK 01
to
BLINK 05
(
BLINK 02
): Selects the blinking pattern
for the buttons as notification when there is an incoming call.;
OFF
:Cancels.
BLUETOOTH®
JS_JVC_KD_R995BTS_K_EN_03.indd 18 7/6/2017 8:40:51 AM