Owner's Manual

ENGLISH
21
After pairing is successful, “PAIRING OK”
“[Device Name]” appears and Bluetooth
compatibility check starts.
If “CONNECT NOW USING PHONE” appears,
operate the Bluetooth device to allow
phonebook access to continue.
“TESTING” flashes on the display.
The connectivity result flashes on the display.
“PAIRING OK” and/or “HANDS-FREE OK”*
1
and/
or “AUD.STREAM OK”*
2
and/or “PBAP OK”*
3
:
Compatible
*
1
Compatible with Hands-Free Profile (HFP)
*
2
Compatible with Advanced Audio Distribution Profile (A2DP)
*
3
Compatible with Phonebook Access profile (PBAP)
After 30 seconds, “PAIRING DELETED” appears to
indicate that pairing has been deleted, and the
unit exits check mode.
• To cancel, press and hold
to turn off the
power, then turn on the power again.
BLUETOOTH®
BLUETOOTH — Audio
Audio player via Bluetooth
1
Press repeatedly to select BTAUDIO (or press SOURCE on the remote control).
• Pressing enters BT AUDIO directly.
2 Operate the Bluetooth audio player to start playback.
To On the faceplate On the remote control
Playback/pause Press the volume knob.
Press
.
Select group or folder Press
. Press .
Reverse skip/Forward skip Press
.
Press
.
Reverse/Fast-forward Press and hold
.
Press and hold
.
Repeat play Press
repeatedly.
TRACK REPEAT , ALL REPEAT , REPEAT OFF
( Not available )
Random play
Press
repeatedly.
GROUP RANDOM , ALL RANDOM , RANDOM OFF
( Not available )
Select a file from a folder/
list
Refer to “Select a file from a folder/list”
on page 9.
( Not available )
Switch between connected
Bluetooth audio devices
Press 5.
*
( Not available )
* Pressing the “Play” key on the connected device itself also causes switching of sound output from the device.
Operations and display indications may differ according to their availability on the connected
device.
While in BT AUDIO source, you can
connect to five Bluetooth audio
devices and switch between these
five devices.
JS_JVC_KD_R995BTS_K_EN_03.indd 21 7/6/2017 8:40:54 AM